90 burb (( daily dragger)) - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HarrisonTX · 10-16-2009, 05:58 AM

Quote:

Originally Posted by 87 dually burb

the 3rd pic is with the 6" flip and no over load springs ( bottomed out on frame alot) 2" of travel in rear
the front is 3" belltech spindle and a SD bag kit the height you see in pic 3 is with the front aired out sitting on inner fender wheels
also note they are 31" tires it sat about 2" high in front at that time

So, thats not exactly a reccommended method? It looks real good, but if i was to do that, i'd drive it everywhere, with it being 2 inchs off the frame, im sure that destroys you after a while.

justpball · 10-16-2009, 09:20 AM

LOL yea it would be ruff!

87 dually burb · 10-16-2009, 11:07 PM

shaved driver mirror

shaved tails added roll pan

shaved pass mirror and antenna

filled tailgate 1' from each end ( will round corner and add a mural later on like a jack label
nick named 80 proof

all spots are white primer with no body work yet

justpball · 10-17-2009, 09:40 AM

any pics of the rear setup?

87 dually burb · 10-17-2009, 11:56 AM

I can take some after 4 today

justpball · 10-17-2009, 12:20 PM

tail lights?

87 dually burb · 10-17-2009, 07:15 PM

not sure what I want yet for lights or where I want the tag
I'm thinking on putting the tag below the rollpan in center
and using cats eye led lights above where the stock ones were

Driveway Dreams · 10-18-2009, 07:05 PM

Looking good so far! Why not put your plate in the recess on the gate?

87 dually burb · 10-19-2009, 12:28 AM

the recess area is for a whiskey label mural like a jack daniels bottle
I just ordered a tag frame with lights that will hang below roll pan on a hinge
also ordered my tail lights and peep mirrors
if it warm up this week I'll start on the body work

justpball · 10-20-2009, 11:33 AM

did you do bag over axel and leave the leaf springs or what?

87 dually burb · 10-21-2009, 10:23 PM

yes its a bag over even with the triple bags I dont get the lift I need I mounted the frame bag mount to high but will be changed in spring to a 2 link with a watts linkage with bag on bar,I had to use my front bag cups as spacers in the rear to keep the bag at a soft ride height

starting on body work got pass side done
finish rear and driver side thurs after work
will send it out next week for exhaust then get it inspected so i can drive it again been off the road since may

justpball · 10-22-2009, 03:49 PM

rear setup pics man pics...LOL

87 dually burb · 10-23-2009, 01:14 AM

I'll have some after noon when I get off work today

87 dually burb · 10-28-2009, 08:23 PM

I forgot to get pics will this friday after noon when I get home

I'll get them this time

justpball · 10-29-2009, 03:39 PM

yea yea...i have heard that before...LOL

87 dually burb · 10-29-2009, 06:24 PM

I got friday off so lookin to spend a few hours working on the burb

87 dually burb · 10-31-2009, 09:50 PM

**lolife99** · 10-31-2009, 11:25 PM

Ever think about running a sleeve bag instead?
They are suppose to ride much better than the double convoluted bags.

87 dually burb · 11-01-2009, 11:25 AM

future plans are a 4 link mounted inside the frame rails to run a 22x12" rim in rear thinking about going with a pro tour theme

87 dually burb · 12-24-2009, 10:13 PM

no real update it's just buried under 2 feet of snow for awhile
plans for jan are 2"dropped crossmember and raise gas tank 4"s will lay on pinch weld then
feb I start all the interior going to stay mostly stock with suede covered pieces
looking to drive it alot next years and work on what I like and dislike

tvblazer78 · 12-26-2009, 08:06 PM

Sounds like you have a plan, with out the snow.

87 dually burb · 12-27-2009, 08:40 PM

also plan tear out most of the tub kit and mold in the 3rd row seat
not happy with what they did some times it better to just do it your self
lesson learned the hard way

87 dually burb · 01-03-2010, 10:05 AM

change of plans and of heart going to part with it and buy me another 4runner to build I will be back in the spring looking for a 6.5 diesel burb for a tow rig
will update with who ever buy it to start there own thread and finish the build

flamingbig10 · 01-03-2010, 12:40 PM

tvblazer78 · 01-03-2010, 01:38 PM

That's sad, hope you can come back soon..

10-16-2009, 09:20 AM	#77
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) LOL yea it would be ruff! __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-16-2009, 11:07 PM	#78
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) shaved driver mirror shaved tails added roll pan shaved pass mirror and antenna filled tailgate 1' from each end ( will round corner and add a mural later on like a jack label nick named 80 proof all spots are white primer with no body work yet __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-17-2009, 09:40 AM	#79
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) any pics of the rear setup? __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-17-2009, 11:56 AM	#80
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) I can take some after 4 today __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-17-2009, 12:20 PM	#81
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) tail lights? __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-17-2009, 07:15 PM	#82
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) not sure what I want yet for lights or where I want the tag I'm thinking on putting the tag below the rollpan in center and using cats eye led lights above where the stock ones were __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-18-2009, 07:05 PM	#83
Driveway Dreams I have car A.D.D. Join Date: Feb 2009 Location: Greeley, Northern Colorado Posts: 4,147	Re: 90 burb (( daily dragger)) Looking good so far! Why not put your plate in the recess on the gate? __________________ -Gerald Building vehicles in memory of the first "car guy" I ever knew, my Grandpa. Bob Dunham 1935-2009. Rest in peace. 61 GMC Suburban SOLD The 86 build thread SOLD Are you a Colorado member?Click here.

10-19-2009, 12:28 AM	#84
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) the recess area is for a whiskey label mural like a jack daniels bottle I just ordered a tag frame with lights that will hang below roll pan on a hinge also ordered my tail lights and peep mirrors if it warm up this week I'll start on the body work __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-20-2009, 11:33 AM	#85
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) did you do bag over axel and leave the leaf springs or what? __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-21-2009, 10:23 PM	#86
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) yes its a bag over even with the triple bags I dont get the lift I need I mounted the frame bag mount to high but will be changed in spring to a 2 link with a watts linkage with bag on bar,I had to use my front bag cups as spacers in the rear to keep the bag at a soft ride height starting on body work got pass side done finish rear and driver side thurs after work will send it out next week for exhaust then get it inspected so i can drive it again been off the road since may __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-22-2009, 03:49 PM	#87
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) rear setup pics man pics...LOL __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-23-2009, 01:14 AM	#88
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) I'll have some after noon when I get off work today __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-28-2009, 08:23 PM	#89
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) I forgot to get pics will this friday after noon when I get home I'll get them this time __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me**************** Last edited by 87 dually burb; 10-28-2009 at 08:24 PM. Reason: speellen

10-29-2009, 03:39 PM	#90
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 90 burb (( daily dragger)) yea yea...i have heard that before...LOL __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

10-29-2009, 06:24 PM	#91
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) I got friday off so lookin to spend a few hours working on the burb __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************



Register or Log In To remove these advertisements.

10-31-2009, 09:50 PM	#92
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

10-31-2009, 11:25 PM	#93
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,682	Re: 90 burb (( daily dragger)) Ever think about running a sleeve bag instead? They are suppose to ride much better than the double convoluted bags. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 10-31-2009 at 11:26 PM.

11-01-2009, 11:25 AM	#94
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) future plans are a 4 link mounted inside the frame rails to run a 22x12" rim in rear thinking about going with a pro tour theme __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

12-24-2009, 10:13 PM	#95
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) no real update it's just buried under 2 feet of snow for awhile plans for jan are 2"dropped crossmember and raise gas tank 4"s will lay on pinch weld then feb I start all the interior going to stay mostly stock with suede covered pieces looking to drive it alot next years and work on what I like and dislike __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

12-26-2009, 08:06 PM	#96
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: 90 burb (( daily dragger)) Sounds like you have a plan, with out the snow. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

12-27-2009, 08:40 PM	#97
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) also plan tear out most of the tub kit and mold in the 3rd row seat not happy with what they did some times it better to just do it your self lesson learned the hard way __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

01-03-2010, 10:05 AM	#98
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: 90 burb (( daily dragger)) change of plans and of heart going to part with it and buy me another 4runner to build I will be back in the spring looking for a 6.5 diesel burb for a tow rig will update with who ever buy it to start there own thread and finish the build __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

01-03-2010, 12:40 PM	#99
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 90 burb (( daily dragger)) __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

01-03-2010, 01:38 PM	#100
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: 90 burb (( daily dragger)) That's sad, hope you can come back soon.. __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

Register or Log In To remove these advertisements.