DBW Gas Pedal Adpater bracket for truck/suv pedal - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 12-15-2015, 10:51 AM

Quote:

Originally Posted by Ellistk

I will take one. Thanks

PM sent with payment information.

zach_carver · 12-17-2015, 11:22 AM

Any option on these for 1965 C10? With a vette pedal

**Hart_Rod** · 12-17-2015, 12:05 PM

Quote:

Originally Posted by zach_carver

Any option on these for 1965 C10? With a vette pedal

I've never tried one of my vette pedal brackets in that year model. I know several people have modded my truck pedals to work in the 60-66s, but I'm not sure how they did it. LMK.

Chrisbeds82 · 12-28-2015, 01:32 AM

I have a 72 c10 swapping in a LS3. Is there a particular pedal that will work best with this? The best place to source that pedal? And price shipped for this bracket?

**Hart_Rod** · 12-28-2015, 10:35 AM

Quote:

Originally Posted by Chrisbeds82

I have a 72 c10 swapping in a LS3. Is there a particular pedal that will work best with this? The best place to source that pedal? And price shipped for this bracket?

I would use the 2005+ corvette pedal. You can find it on ebay for - $50-$100. The pedal bracket is $50 shipped. Check out this thread it contains all the info for that pedal bracket:

http://67-72chevytrucks.com/vboard/s...d.php?t=631165

Thanks! Rob

**Hart_Rod** · 12-29-2015, 03:05 PM

Quote:

Originally Posted by Chrisbeds82

I have a 72 c10 swapping in a LS3. Is there a particular pedal that will work best with this? The best place to source that pedal? And price shipped for this bracket?

What did you decide on the pedal?

**Hart_Rod** · 01-07-2016, 11:54 AM

For all of the guys looking for a pedal bracket to work with the 73-87 trucks, here's a thread that has some great info in it:

http://67-72chevytrucks.com/vboard/s...d.php?t=692222
http://www.hotrodlane.cc/Streetstories/81%20swap.pdf

Apparently a factory OEM gas pedal from a 94-02 CHEVY GMC 6.5L V8 DIESEL (PN 15984422) will bolt right in. You have to repin a few wires, but it's supposed to be pretty straight forward.

The .pdf file has a complete discussion on the entire install, but here is a small snippet:

"This is the installed Pedal Position Sensor AKA Drive by Wire pedal.
I used one from a 1998 6.5 Diesel truck as it bolts right up and is a closer match
than the later Silverado pedal. A couple of the wires do have to be moved as it is
internally wired different. Basically, there are three different sensors in the pedal
and the PCM compares all three of these to determine how much throttle
opening the drivers is requiring. If these three sensors do not agree, a code will
be set and the PCM takes a best guess at what the throttle opening should be.
The gray wire was moved from location A to J, the Brown wire was moved from
location E to A and the Yellow wire was moved from location J to E. I also had to
add a slot in the connector plug so it would plug into the pedal."

PLEASE NOTE I HAVEN'T TRIED THIS ON A TRUCK, I'M JUST PASSING THE INFORMATION. DO YOUR HOMEWORK BEFORE YOU PURCHASE ANY PARTS!!!!

Good luck with your LS Swap!!!

downbytheriver · 01-10-2016, 10:22 PM

Ready to buy, you ready to ship?

**Hart_Rod** · 01-11-2016, 08:59 AM

Quote:

Originally Posted by downbytheriver

Ready to buy, you ready to ship?

Yes, paypal info is iin post #1 on the first page. LMK!

downbytheriver · 01-11-2016, 11:41 AM

Quote:

Originally Posted by Hart_Rod

Yes, paypal info is iin post #1 on the first page. LMK!

Sent, thanks man!

Ctinman · 01-13-2016, 08:37 PM

Do you have any ready to go right now?
Thanks

**Hart_Rod** · 01-13-2016, 08:41 PM

Quote:

Originally Posted by Ctinman

Do you have any ready to go right now?
Thanks

Yes sir! Paypal info in first post on page 1. LMK!

downbytheriver · 01-15-2016, 06:07 PM

Got mine in two days! Well worth the time savings alone!

**Hart_Rod** · 01-19-2016, 09:57 AM

Quote:

Originally Posted by downbytheriver

Got mine in two days! Well worth the time savings alone!

Glad you like it! Post pictures when you get it installed. Thanks again!

z71se · 02-03-2016, 10:38 PM

Are you able to make one for the 88-99 trucks?

**Hart_Rod** · 02-04-2016, 12:47 PM

Quote:

Originally Posted by z71se

Are you able to make one for the 88-99 trucks?

I would try this:

http://67-72chevytrucks.com/vboard/s...d.php?t=692222

http://www.hotrodlane.cc/Streetstories/81%20swap.pdf

z71se · 02-04-2016, 10:22 PM

Quote:

Originally Posted by Hart_Rod

I would try this:

http://67-72chevytrucks.com/vboard/s...d.php?t=692222

http://www.hotrodlane.cc/Streetstories/81%20swap.pdf

Great links thanks!

ivanandjuri · 02-26-2016, 01:59 AM

i need one, how do i pay and where do i put my address?
Posted via Mobile Device

**Hart_Rod** · 02-26-2016, 07:43 AM

Quote:

Originally Posted by ivanandjuri

i need one, how do i pay and where do i put my address?
Posted via Mobile Device

Paypal is robhartley@aol.com. you can PM me your address or send it with the paypal. Thanks!

clemsonteg · 02-26-2016, 10:59 AM

I will take one also if you still have one available.

**Hart_Rod** · 02-26-2016, 11:14 AM

Quote:

Originally Posted by clemsonteg

I will take one also if you still have one available.

Yes sir, I have them boxed and ready to go!

clemsonteg · 02-26-2016, 01:01 PM

Awesome! you got funds

**Hart_Rod** · 02-26-2016, 01:32 PM

Quote:

Originally Posted by clemsonteg

Awesome! you got funds

Got it! Will ship via USPS tomorrow. Thanks!

ochre 72 · 02-28-2016, 03:11 PM

Looks like a good product. Just sent payment.

**Hart_Rod** · 02-28-2016, 04:24 PM

Quote:

Originally Posted by ochre 72

Looks like a good product. Just sent payment.

Thanks! It will ship tomorrow via USPS.

12-17-2015, 11:22 AM	#2
zach_carver Registered User Join Date: Aug 2014 Location: Blue Ridge,GA Posts: 508	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal Any option on these for 1965 C10? With a vette pedal __________________ 1965 C10 LS2/4l70, WHITE, 5/7 DROP LINK TO SUPER SNOOPY C10 BUILD---> http://67-72chevytrucks.com/vboard/s...d.php?t=689283 1977 C10 SILVERADO HAWAIIAN BLUE, 5/5" DROP, LS6/4L80E 1976 CHEVY K5, 350/350, YUBA GOLD/SADDLE

12-28-2015, 01:32 AM	#4
Chrisbeds82 Registered User Join Date: Jun 2015 Location: Fort Worth, Texas Posts: 112	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal I have a 72 c10 swapping in a LS3. Is there a particular pedal that will work best with this? The best place to source that pedal? And price shipped for this bracket?

01-07-2016, 11:54 AM	#7
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,835	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal For all of the guys looking for a pedal bracket to work with the 73-87 trucks, here's a thread that has some great info in it: http://67-72chevytrucks.com/vboard/s...d.php?t=692222 http://www.hotrodlane.cc/Streetstories/81%20swap.pdf Apparently a factory OEM gas pedal from a 94-02 CHEVY GMC 6.5L V8 DIESEL (PN 15984422) will bolt right in. You have to repin a few wires, but it's supposed to be pretty straight forward. The .pdf file has a complete discussion on the entire install, but here is a small snippet: "This is the installed Pedal Position Sensor AKA Drive by Wire pedal. I used one from a 1998 6.5 Diesel truck as it bolts right up and is a closer match than the later Silverado pedal. A couple of the wires do have to be moved as it is internally wired different. Basically, there are three different sensors in the pedal and the PCM compares all three of these to determine how much throttle opening the drivers is requiring. If these three sensors do not agree, a code will be set and the PCM takes a best guess at what the throttle opening should be. The gray wire was moved from location A to J, the Brown wire was moved from location E to A and the Yellow wire was moved from location J to E. I also had to add a slot in the connector plug so it would plug into the pedal." PLEASE NOTE I HAVEN'T TRIED THIS ON A TRUCK, I'M JUST PASSING THE INFORMATION. DO YOUR HOMEWORK BEFORE YOU PURCHASE ANY PARTS!!!! Good luck with your LS Swap!!! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-10-2016, 10:22 PM	#8
downbytheriver Registered User Join Date: Aug 2011 Location: Saint Augustine, FL Posts: 195	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal Ready to buy, you ready to ship? __________________ 68 SWB 5.3 turbo build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=578220

01-13-2016, 08:37 PM	#11
Ctinman Registered User Join Date: Dec 2015 Location: Columbia, SC Posts: 44	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal Do you have any ready to go right now? Thanks

01-15-2016, 06:07 PM	#13
downbytheriver Registered User Join Date: Aug 2011 Location: Saint Augustine, FL Posts: 195	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal Got mine in two days! Well worth the time savings alone! __________________ 68 SWB 5.3 turbo build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=578220

02-03-2016, 10:38 PM	#15
z71se Registered User Join Date: Nov 2015 Location: Cailfornia Posts: 284	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal Are you able to make one for the 88-99 trucks? __________________ 77 C10 Silverado SWB - LS Swap, mechanical resto-mod 05 Z71 Silverado RCSB - 5.3L LM7, 76mm turbo, 4L80e

02-26-2016, 01:59 AM	#18
ivanandjuri Registered User Join Date: Jan 2016 Location: Yuma Az Posts: 17	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal i need one, how do i pay and where do i put my address? Posted via Mobile Device

02-26-2016, 10:59 AM	#20
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal I will take one also if you still have one available.

02-26-2016, 01:01 PM	#22
clemsonteg Registered User Join Date: Jul 2012 Location: Anderson,SC Posts: 953	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal Awesome! you got funds

02-28-2016, 03:11 PM	#24
ochre 72 Registered User Join Date: Feb 2016 Location: Woodstock, Ga. Posts: 183	Re: DBW Gas Pedal Adpater bracket for truck/suv pedal Looks like a good product. Just sent payment.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.