The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Electrical

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-24-2016, 12:37 PM   #1
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
power door lock relay

Hello All, I am looking for the relay for the power door locks. I checked online but got confused so I am asking for help here. Where do I get one for an 85 86 or 87 c10 truck? Or any year that has power locks. Thanks, John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is offline   Reply With Quote
Old 10-24-2016, 07:00 PM   #2
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: power door lock relay

Like this?

G10749 - 1977-91 GM Truck Power Door Lock Relay Switch
Replace your power door lock relay switch with this original GM factory replacement.

Fits:
1977-91 GM truck (All models)





http://www.classicindustries.com/pro...ts/g10749.html
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 10-24-2016, 08:37 PM   #3
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
Re: power door lock relay

Thanks Andy4639, yea I saw that one, kind of expensive. I may go to a " you pull it " and see if they have one. Does anyone on the broad have one let me know.

Thanks John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is offline   Reply With Quote
Old 10-25-2016, 09:53 AM   #4
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Thumbs up Re: power door lock relay

Quote:
Originally Posted by Big Blue View Post
Thanks Andy4639, yea I saw that one, kind of expensive. I may go to a " you pull it " and see if they have one. Does anyone on the broad have one let me know.

Thanks John
Well why not use a regular relay then from the parts store. They are the same thing just want have the fance mounting tang.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Old 10-25-2016, 10:04 AM   #5
gmachinz
Account Suspended
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 4,143
Re: power door lock relay

I've got them in stock-$35 shipped if you want one!
gmachinz is offline   Reply With Quote
Old 10-25-2016, 03:49 PM   #6
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
Re: power door lock relay

gmachinz, thanks, I don't know how to use paypal using email, I do have a pay pal account. Let me know how to do this.

John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is offline   Reply With Quote
Old 10-25-2016, 03:54 PM   #7
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
Re: power door lock relay

Thanks Andy4639, I am going with gmachinz on this one. Thanks for your response to my questions. Have A good day.

John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is offline   Reply With Quote
Old 10-25-2016, 05:51 PM   #8
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
Re: power door lock relay

gmachinz, Pay Pal sent.

John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is offline   Reply With Quote
Old 11-14-2016, 06:47 PM   #9
K25alive
Senior Member
 
Join Date: Jun 2015
Location: Portland, OR
Posts: 272
Re: power door lock relay

Gmachinz - I could use one of these too for my 79. Still have stock?
K25alive is offline   Reply With Quote
Old 11-14-2016, 07:55 PM   #10
gmachinz
Account Suspended
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 4,143
Re: power door lock relay

Yes I do-$35 shipped via paypal! I'll send payment info.
gmachinz is offline   Reply With Quote
Old 02-15-2018, 08:57 PM   #11
56Fred
Registered User
 
Join Date: Feb 2018
Location: Mebane, NC
Posts: 2
Re: power door lock relay

Gmachinz, I am in need of one of those relays for my 78. I've looked all over for them. Do you still have them in stock?
Posted via Mobile Device
56Fred is offline   Reply With Quote
Old 02-15-2018, 08:59 PM   #12
56Fred
Registered User
 
Join Date: Feb 2018
Location: Mebane, NC
Posts: 2
Quote:
Originally Posted by gmachinz View Post
I've got them in stock-$35 shipped if you want one!
Gmachinz, I am in need of one of those relays for my 78. I've looked all over for them. Do you still have them in stock?
Posted via Mobile Device
56Fred is offline   Reply With Quote
Old 02-15-2018, 09:44 PM   #13
gmachinz
Account Suspended
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 4,143
Re: power door lock relay

Yes I do! I’ll PM ya!
gmachinz is offline   Reply With Quote
Old 08-07-2018, 11:31 AM   #14
BigRolo
Registered User
 
Join Date: Aug 2018
Location: DALLAS
Posts: 1
Re: power door lock relay

I am looking for not only the power door relay Prt G10749 but the plug ins to the relay. These are part of the harness and I think they are 2 seperate plugs. Can anyone help??
BigRolo is offline   Reply With Quote
Old 06-08-2019, 02:40 PM   #15
ramz
Registered User
 
ramz's Avatar
 
Join Date: Jul 2011
Location: Dallas, TX
Posts: 205
Re: power door lock relay

Got any more relays for sale? Are they new? used?
ramz is offline   Reply With Quote
Old 06-08-2019, 03:03 PM   #16
gmachinz
Account Suspended
 
Join Date: Jun 2011
Location: Des Moines, IA.
Posts: 4,143
Re: power door lock relay

I do! How many are you looking for? Mine are tested/used ones since all available GM NOS lock relays of that style are 100% obsolete now.
gmachinz is offline   Reply With Quote
Old 06-08-2019, 03:04 PM   #17
ramz
Registered User
 
ramz's Avatar
 
Join Date: Jul 2011
Location: Dallas, TX
Posts: 205
Re: power door lock relay

Just 1
Posted via Mobile Device
ramz is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com