new Bed wood kit

[corvettejim1968]

just ordered the Mar-K oak wood with unpolished stainless steel hardware kit.
has anybody here used Mar-K? what are your thoughts?

[dstarrett]

Got the pine and unpolished strips as well as tailgate from Mar-K.More than satisfied with them.

[northern 85]

Yes oak, un polished strips beautiful right out of the box,very happy!

[Indian113]

Yes oak, un polished strips beautiful right out of the box,very happy!

That is very Nice

[Clyde65]

I got many parts from them over the years, very happy with them!

[Larry64]

Oak, polished strips, rear sill & angle strips. All from mar-k. Not 1 single problem with their products

[corvettejim1968]

did you have to remove the bumper to change out the wood?

[65 C20]

Originally Posted by northern 85

Yes oak, un polished strips beautiful right out of the box,very happy!Attachment 1584290

When you say right out of the box, do you mean it came with the black finish ? Or did you do it to thier spec's ?
I like the looks of yours.
What came with mine was the oak boards but it had a clear coat of some kind that after sitting outside off and on has lost it's finish on the edges, bolt holes etc.
It spends most of the time in the shop .
If I take it out to refinish it I think I will go the black route.
When the oak had the fresh clear on it I would get alot of compliments.
One time I came out of a store and a guy was standing there and said that the bed wood looked better then his kitchen floor.
If it could stay that way would be nice but I think the rain and even just the sunlight breaks down the clear coat.

[Clyde65]

I believe all the bed wood comes unfinished. I did the black on mine as well just like Mar-K instructed

[Larry64]

On my truck the bed was apart, thus the bumper was off. The wood can be changed with the bumper on.

[northern 85]

Originally Posted by 65 C20

When you say right out of the box, do you mean it came with the black finish ? Or did you do it to thier spec's ?
I like the looks of yours.
What came with mine was the oak boards but it had a clear coat of some kind that after sitting outside off and on has lost it's finish on the edges, bolt holes etc.
It spends most of the time in the shop .
If I take it out to refinish it I think I will go the black route.
When the oak had the fresh clear on it I would get alot of compliments.
One time I came out of a store and a guy was standing there and said that the bed wood looked better then his kitchen floor.
If it could stay that way would be nice but I think the rain and even just the sunlight breaks down the clear coat.

It was unfinished,i say beautiful out of the box because it didnt need any sanding or any mods to it at all! I used 3 coats of min wax ebony stain let dry for a day then rubbed in 3 coats of boiled linseed oil on all sides.if you use any boiled linseed oil do not leave the rags balled up when done they will start fire!! Thank for the like, i was going darker with it, but really liked the contrast against the black body,plus you really see the grain.

[corvettejim1968]

i should be doing the install in the next couple of weeks. I want to have it done before Dino`s Get down on November 18th at 18th street and Indian School In Phoenix,Az. If anybody wants to help you are welcome as I've never done this and the bed is heavy im sure.

[jbgroby]

I followed their instruction on painting my wood, very happy with their produced as well.

[corvettejim1968]

wood is stained,sealed,and clear coated.

[phraza]

I have a Mar-K oak set and stainless strips sitting in my garage to be installed

Will probably start it next month when i get some weekend time to coat the wood (been reading various articles - some say 2 coats, some say 5 coats etc), will see how I go when I install.

Can't wait, going to transform it so much, as the wood in there at the mo is crappy

[corvettejim1968]

We did one coat of stain three coats of sealer and 3 coats of clear coat

[NevEno]

Very nice Jim!

[corvettejim1968]

[corvettejim1968]

[corvettejim1968]

[corvettejim1968]

ready for sandblast

[corvettejim1968]

blasted and painted the frame

[corvettejim1968]

blasted the inside of the bed

[corvettejim1968]

undercoated the fender wells

[corvettejim1968]

painted the inside of the bed