![]() |
![]() |
#1 |
Senior Member
![]() Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,304
|
1970 c10
So this is my 1970 C10. It is a factory V8, auto, SWB. You might come across them occasionally where you live: but they are rare as hen's teeth where I am. Why would any self-respecting farmer buy something he couldn't get a sheet of plywood in? Or more than four hogs?!
I looked for several years for one in any condition at all. I didn't have much money but I found this one. My friend - who had witnessed me lose out on them in the past said - "just tell the guy you will give him what he wants. On the phone". This was October 2015. I said I would send the seller the money, he was about 3 hours away... and I would get there about 2 hours and 45 minutes after the money. There was a period of silence... I thought we were disconnected, then he said "ok, no need to send money, just get it tomorrow". I was there the next day with a borrowed one ton and a trailer I had bought just to pick this one up. This pic is me stopping to check the straps. Really decent guy. It turned out that he had bought the truck to pull a little holiday trailer for his family: they all were bigger now and he needed money for his 67 Camaro project. He wasn't an idiot, though, he knew that the truck was special. He swapped the stock 307 for a 4 bolt main 350 that he got from another 1970, and stole some of the interior too. I have put about 60 000 miles on the truck without doing a thing to it. It has simply gotten lighter and lighter every time I slam the door. It does not burn a drop of oil but it leaks a lot and has significant blow by. I am starting this thread so I might be encouraged to work on it. Highlights already accomplished include replacing the box with one which is not completely rotten. as well as some 6 bolt ralleys. Honestly that is about it. I need to finish some of my projects so I can get to this one. Sadly the truck has gone to seed somewhat. Need to get serious about it.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 Last edited by dagnabbitt; 12-19-2023 at 01:22 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,304
|
Re: 1970 c10
Being a Canadian truck I have the privilege of posting this too. Kind of interesting.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 Last edited by dagnabbitt; 12-19-2023 at 03:57 AM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2011
Location: Northern Calif.
Posts: 3,594
|
Re: 1970 c10
I like it!
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,284
|
Re: 1970 c10
Thank You for NOT putting a late model bed on it.
I still like your diesel pickup the best!!! |
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,304
|
Re: 1970 c10
Thanks for the compliments, I am hoping to clear some space in the shop so I can work on it!
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Dec 2014
Location: Edmonton Alberta
Posts: 1,304
|
Re: 1970 c10
A friend is moving and her husband is cleaning out the garage and has this 1990 350 that he might give me for free if I want it. It has a bunch of miles on it but I know it runs. In fact, I bought the 700R4 it was mated to off of him a few years ago and rebuilt it for my 81.
Even though I could get it for free I am hesitant to accept it since I might be devoting time and money and space to working on another old engine when I should be considering the crate engine route. The engine I have in the 70 runs well, does not burn oil, and has all the power I need. But it is developing some significant blowby, and of course it leaks, too. It is an original 1970 four bolt main and if it hasn't been bored out already I would like to pull it and get it rebuilt. I have a lot of trucks, and having an extra 350 isn't a bad thing. Decisions, decisions. Not sure where this engine was when I needed one a few years ago.
__________________
DAVE Edmonton, Alberta 1959 Apache 1967 K20 1968 C20 1970 C10 1972 GMC 2500 1981 C10 |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jul 2021
Location: Keller, Texas
Posts: 442
|
Re: 1970 c10
Free is Free, no reason to pass on it. You can get it now and store for future use. No money involved until you work on it. As long as you have the room to store it I would get it.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|