The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-16-2020, 04:42 AM   #1
BlouDon
Registered User
 
BlouDon's Avatar
 
Join Date: Feb 2019
Location: Centurion, Gauteng, South Africa
Posts: 227
"Octane adjustment knob"

I'm referring to the round knob on the side of the dissy.

According to the manual this knob must be turned to adjust for octane, but the knob on my truck can turn many times.

I would appreciate knowing more about what this knob does and how it works please.
Attached Images
 
__________________
Best regards, Philip

Chev: '70 C10 (350 V8 / 700R4 ) & '59 Apache ( 235, 3-sp )
Jensen Interceptor '74: Mopar 440(EFI'ed) / 4L60e
Jaguar: '72 E-type Coupe V12 & '74 E-type V12 Convertible & '80 XJS V12

Last edited by BlouDon; 02-16-2020 at 07:42 AM. Reason: adding pic
BlouDon is offline   Reply With Quote
Old 02-16-2020, 08:57 AM   #2
sack54
Registered User
 
Join Date: Dec 2017
Location: Londonderry NH.
Posts: 138
Re: "Octane adjustment knob"

If you unscrew the cap, you will find grease inside. If low add some.
This is to add a little grease to dizzie to keep lubed, nothing else/
And only turn inward about 1/8 turn about every 6 months dizzie only needs a little lube

Last edited by sack54; 02-16-2020 at 09:03 AM.
sack54 is offline   Reply With Quote
Old 02-16-2020, 09:47 AM   #3
BlouDon
Registered User
 
BlouDon's Avatar
 
Join Date: Feb 2019
Location: Centurion, Gauteng, South Africa
Posts: 227
Re: "Octane adjustment knob"

Quote:
Originally Posted by sack54 View Post
If you unscrew the cap, you will find grease inside. If low add some.
This is to add a little grease to dizzie to keep lubed, nothing else/
And only turn inward about 1/8 turn about every 6 months dizzie only needs a little lube
Thank you!!!

That explains the grease I found on my fingers when I fastened the timing bolt.
__________________
Best regards, Philip

Chev: '70 C10 (350 V8 / 700R4 ) & '59 Apache ( 235, 3-sp )
Jensen Interceptor '74: Mopar 440(EFI'ed) / 4L60e
Jaguar: '72 E-type Coupe V12 & '74 E-type V12 Convertible & '80 XJS V12
BlouDon is offline   Reply With Quote
Old 02-17-2020, 09:56 AM   #4
1project2many
Registered User
 
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,149
Re: "Octane adjustment knob"

There is a manual available online that might be helpful.


This page shows the octane adjustment along with instructions for setting timing:
http://chevy.oldcarmanualproject.com...55ctsm0620.htm

Red arrow points to the octane adjustment in both photos. In order to adjust timing by the instructions you set the octane adjustment to 0, loosen the distributor clamp (yellow arrow in photo of your engine), and set distributor position using a timing light. Once the timing is set you can make changes for increased or decreased octane by loosening the bolt on the octane adjustment and turning the distributor.
Attached Images
  
1project2many is offline   Reply With Quote
Old 02-17-2020, 06:23 PM   #5
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,246
Re: "Octane adjustment knob"

"Octane adjustment" = resetting the timing to get along with some of the crappy gas that was around then. Not as bad as some you see these days but in the 50's and early 60's if you didn't go to a decent volume name brand station like Chevron, Texaco, Shell or Union 76 and stopped at some hole in the wall one pump station you stood a chance of getting gas that barely could be called gas and might be doctored with coal oil or some other cheap fuel to boost the owner's profit level. Or the guys who lived down on the border who drove over into Mexico to fill up at the time.

Now days it is more in the way of a way to fine tune the timing down to the N'th degree while on that distributor. If you have an adjustable timing light it is easy to have the ball on the flywheel line up with the pointer and then dial in the exact timing you want with that setup.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 02-17-2020, 08:00 PM   #6
whitedog76
Registered User
 
Join Date: Jan 2014
Location: Peoria, IL
Posts: 1,450
Re: "Octane adjustment knob"

Wasn't it used for summer/winter tuning? Advance in the winter, retard in summer.
whitedog76 is offline   Reply With Quote
Old 02-18-2020, 04:56 AM   #7
BlouDon
Registered User
 
BlouDon's Avatar
 
Join Date: Feb 2019
Location: Centurion, Gauteng, South Africa
Posts: 227
Re: "Octane adjustment knob"

Quote:
Originally Posted by whitedog76 View Post
Wasn't it used for summer/winter tuning? Advance in the winter, retard in summer.
Assuming fuel octane remains constant, the only way in which winter vs summer can play a role is when it comes to intake air temperatures. This engine has a rather low compression ratio, so it would really require very low octane fuel and rather high intake temps (30ºC or more) to make this engine detonate.

Having set the timing as per the book, timing would be very far away from detonation. I've advanced mine quite a bit which has added at least "1 horse" to the power output - but with so little, every bit helps. I also live at 1400m AMSL which calls for at least another 4 degrees of advance.

I'm running mine on 93 Octane (If that can be believed) and in our high summer temps (30ºC or more) there is no sign of detonation yet - even with timing rather aggressively advanced.
__________________
Best regards, Philip

Chev: '70 C10 (350 V8 / 700R4 ) & '59 Apache ( 235, 3-sp )
Jensen Interceptor '74: Mopar 440(EFI'ed) / 4L60e
Jaguar: '72 E-type Coupe V12 & '74 E-type V12 Convertible & '80 XJS V12
BlouDon is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com