|
02-18-2011, 04:12 AM
|
#1 |
|
Registered User
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,004
|
CLR use on headers ?
I am wondering after seeing the results of clr on oxidized an rusty body panels if you would think the product CLR would work on headers? I have used hi temp paint, BBQ grill paint, I have even seen the brush on header paint turn pink. So any thoughts of this or another product short of getting then jet coated. I am just not ready to spend that money yet. I just want a uniform consistent color that lasts on my headers. Thoughts ideas thanks...
Posted via Mobile Device
__________________
*SOLD* 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black  Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride |
|
|
|
02-18-2011, 08:59 AM
|
#2 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: CLR use on headers ?
i would b afraid of toxic fumes and health risks when the header gets to temp
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
02-18-2011, 12:05 PM
|
#3 |
|
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: CLR use on headers ?
bump for some more insight... Not familiar with anyone that has used this process.
What about having them sand blasted, followed by high temp paint?
__________________
-Nate  1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 02-18-2011 at 12:05 PM. |
|
|
|
|
02-18-2011, 12:48 PM
|
#4 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,521
|
Re: CLR use on headers ?
Try these guys. Good stuff. Better than Any other I've tried.
http://www.eastwood.com/tlc-colorgar...olish-4oz.html |
|
|
|
|
02-19-2011, 01:08 AM
|
#5 |
|
Registered User
Join Date: Jun 2010
Location: houston, tx
Posts: 323
|
Re: CLR use on headers ?
how about some of those 158 dollar stainless steel headers off of ebay?
|
|
|
|
|
02-19-2011, 11:11 PM
|
#6 |
|
Registered User
Join Date: Jun 2000
Location: Festus, Missouri
Posts: 1,004
|
Re: CLR use on headers ?
thanks geezer just have had bad luck with coatings but the price isnt bad
primrrd i would but its hard to buy new headers when i have a perfectly fine set that i only paid $50 for they just wont keep any color on them
__________________
*SOLD* 1968 Chevy SWB Fleet 350/350 combo Tach/tilt/buddy buckets Bagged/18" Wheels Black on Black Project "Pandemic" the Farm Rat 1927 Chevy Capitol Truck Rat rod '30 Model A Frame Dual Carb 5.3 LS http://www.67-72chevytrucks.com/vboa...d.php?t=804162 2007 GMC 4 DOOR 2WD BUILT 5.3 STAGE 3 CAM 93 TUNE LIFTED 22X12 WHEELS 33" TIRES 2023 Jeep RENEGADE Wifes ride |
|
|
|
|
02-20-2011, 12:06 AM
|
#7 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,521
|
Re: CLR use on headers ?
And cdowns is right. Carefull when you first warm it up a few times till the coating bakes on. Noxious fumes!!
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
