How much would you spend - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BKSS67 · 09-15-2014, 11:26 AM

Agreed. If the sending unit is that rusty then the inside of the tank is just as bad.

Replace the tank if you have the money. If not, carry an extra fuel filter with you. Also add a filter before the pump.

Lalla666 · 09-15-2014, 04:04 PM

I don't have the money right now I'm goin to replace the sending unit and I have a inline filter already under the truck and there's one in the carb

Lalla666 · 09-15-2014, 08:20 PM

Ok guys today I did half a tune up I changed the plugs, coil, PVC valve , bought valve cover gaskets for tomarrow rubber ones felpro , and sprayed the motor down with degreaser and washed it off with water, bagged the carb,dizzy, and altnator so no water got on those
How does the plugs look to you guys

ole dollor · 09-16-2014, 04:57 PM

man its good to hear that you got it running , and now you can have some fun with it...

dmack91 · 09-17-2014, 01:04 AM

The plugs look like it is running a little rich - but not too bad. No oil is good.

Lalla666 · 09-17-2014, 06:18 AM

Quote:

Originally Posted by ole dollor

man its good to hear that you got it running , and now you can have some fun with it...

I'm glad to have it at my house and glad I got here running for the second time lol but the sending unit,float and gas cap will be here Friday

Lalla666 · 09-17-2014, 06:19 AM

Quote:

Originally Posted by dmack91

The plugs look like it is running a little rich - but not too bad. No oil is good.

That's what I was thinking too, you want a nice cardboard color right ?

Lalla666 · 09-18-2014, 07:49 AM

Ok guys I'm goin to a junk yard in pa Harry's u pull it very cheap compared here in ct so I was wonder what parts do I need to swap to discs all around and stay 8 lug ? What year trucks am I looking for ,last time I got a 5 lug swap for my mustang it cost me 80 bucks for everything. Spindles, axle shafts calibers,brackets master cylinder. So if I can find a donor truck I'm getting the swap, I think I need spindles lower ball joints calibers for the front and as for the rear I have no idea

and also a master cylinder and proportion valve

Lalla666 · 09-18-2014, 07:52 AM

http://www.wegotused.com/?page_id=13...anyName=harrys if anybody is close to pa check out there price list, it's worth a trip I live 3 hrs away and I'm goin Saturday

Lalla666 · 09-19-2014, 08:33 PM

Got some new parts today wish it told me It came with a float so now I have a extra if any one needs it let me know

09-15-2014, 11:26 AM	#126
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: How much would you spend Agreed. If the sending unit is that rusty then the inside of the tank is just as bad. Replace the tank if you have the money. If not, carry an extra fuel filter with you. Also add a filter before the pump.

09-15-2014, 04:04 PM	#127
Lalla666 Registered User Join Date: Mar 2014 Location: East haven Posts: 91	Re: How much would you spend I don't have the money right now I'm goin to replace the sending unit and I have a inline filter already under the truck and there's one in the carb

09-15-2014, 08:20 PM	#128
Lalla666 Registered User Join Date: Mar 2014 Location: East haven Posts: 91	Re: How much would you spend Ok guys today I did half a tune up I changed the plugs, coil, PVC valve , bought valve cover gaskets for tomarrow rubber ones felpro , and sprayed the motor down with degreaser and washed it off with water, bagged the carb,dizzy, and altnator so no water got on those How does the plugs look to you guys

09-16-2014, 04:57 PM	#129
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: How much would you spend man its good to hear that you got it running , and now you can have some fun with it...

09-17-2014, 01:04 AM	#130
dmack91 Registered User Join Date: Jan 2011 Location: Redmond, OR Posts: 754	Re: How much would you spend The plugs look like it is running a little rich - but not too bad. No oil is good. __________________ 68 Chev C20- son has it now 83 K20 - bought from son 70 C20 - in progress

09-18-2014, 07:49 AM	#133
Lalla666 Registered User Join Date: Mar 2014 Location: East haven Posts: 91	Re: How much would you spend Ok guys I'm goin to a junk yard in pa Harry's u pull it very cheap compared here in ct so I was wonder what parts do I need to swap to discs all around and stay 8 lug ? What year trucks am I looking for ,last time I got a 5 lug swap for my mustang it cost me 80 bucks for everything. Spindles, axle shafts calibers,brackets master cylinder. So if I can find a donor truck I'm getting the swap, I think I need spindles lower ball joints calibers for the front and as for the rear I have no idea and also a master cylinder and proportion valve

09-18-2014, 07:52 AM	#134
Lalla666 Registered User Join Date: Mar 2014 Location: East haven Posts: 91	Re: How much would you spend http://www.wegotused.com/?page_id=13...anyName=harrys if anybody is close to pa check out there price list, it's worth a trip I live 3 hrs away and I'm goin Saturday

09-19-2014, 08:33 PM	#135
Lalla666 Registered User Join Date: Mar 2014 Location: East haven Posts: 91	Re: How much would you spend Got some new parts today wish it told me It came with a float so now I have a extra if any one needs it let me know



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.