Blazer Door? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heavy-Chevy · 07-05-2002, 11:39 PM

What is the avg. $ for one?

Longhorn Man · 07-05-2002, 11:46 PM

Just get a truck door and hack off the upper part.
Much cheaper.

Heavy-Chevy · 07-05-2002, 11:48 PM

What about the caps?

junkyardjohn · 07-05-2002, 11:55 PM

LONGHORNMAIL IS RIGHT AGAIN. TRUCK DOORS ARE A WHOLE LOT CHEAPER & EASIER TO FIND, & CUTTING THEM DOWN ISN'T THAT TUFF OF A JOB. BUT IF YOU WANT BLAZER DOORS, I KNOW WHERE A PAIR OF DOORS & A TAILGATE OFF A JIMMY ARE. I'M NOT SURE WHAT THE GUY WANTS FOR THEM, BUT EMAIL ME IF YOUR INTERESTED, & I'LL GO CHECK ON EM. JOHN

Longhorn Man · 07-05-2002, 11:57 PM

I dunno bout caps? What are you refering to...to cover the cut up post? I think the blazer weather stripping covers it up. Ask OldChev...e-mail him, he don't come around much anymore...he did it to his though.

junkyardjohn · 07-05-2002, 11:57 PM

I MAY BE ABLE TO COME UP WITH SOME CAPS TOO

junkyardjohn · 07-06-2002, 12:01 AM

ANDY -- HE'S TALKING ABOUT THE PLASTIC CAPS THAT GO ON THE WINDOW FRAME ABOVE THE WING VENTS. THEY'RE HARDER TO COME BY THAN HENS TEETH, AN NOBODYS REPRODUCING THEM.

Heavy-Chevy · 07-06-2002, 12:03 AM

There is plastic caps on the place were the truck door windowhoop is at.

Heavy-Chevy · 07-06-2002, 12:04 AM

Ditto!!!!!

LOL!

Longhorn Man · 07-06-2002, 12:08 AM

Ahhhh, ok. Only seen one blazer worth looking at, and that was in march. Plus I was excited becouse we were picking up the longhorn

Longhorn Man · 07-06-2002, 12:10 AM

But this is why longhornjeff and I were there though.

Heavy-Chevy · 07-06-2002, 12:12 AM

What happen to tuck behind the blazer?

Longhorn Man · 07-06-2002, 12:17 AM

We towed it from PA to my house here in Columbus Ohio...that's my one ton Longhorn.

Longhorn Man · 07-06-2002, 12:20 AM

oops forgot the pic...this was taken on the PA toll road at about 50 MPH....white nuckle ride...scared to look in the mirrors. I never did figure which truck was in charge there...the blazer was actually way under weight to do this task.

Heavy-Chevy · 07-06-2002, 12:20 AM

What kind of rearend does it have? ( dana 60?)

Heavy-Chevy · 07-06-2002, 12:25 AM

I bet that was fun!!!

Longhorn Man · 07-06-2002, 12:29 AM

Other than the wig-wag of the rear end of the blazer, it was awsome. Road trips...trucks...lotsa Mtn dew, and meeting board members....what else could you ask for?
It has a Eaton Corp in it.

Heavy-Chevy · 07-06-2002, 12:31 AM

How many members have you met?

Longhorn Man · 07-06-2002, 12:36 AM

Just those two.

Heavy-Chevy · 07-06-2002, 12:39 AM

cool............

07-05-2002, 11:39 PM	#1
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	Blazer Door? What is the avg. $ for one? __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

07-05-2002, 11:48 PM	#3
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	What about the caps? __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

07-05-2002, 11:55 PM	#4
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	LONGHORNMAIL IS RIGHT AGAIN. TRUCK DOORS ARE A WHOLE LOT CHEAPER & EASIER TO FIND, & CUTTING THEM DOWN ISN'T THAT TUFF OF A JOB. BUT IF YOU WANT BLAZER DOORS, I KNOW WHERE A PAIR OF DOORS & A TAILGATE OFF A JIMMY ARE. I'M NOT SURE WHAT THE GUY WANTS FOR THEM, BUT EMAIL ME IF YOUR INTERESTED, & I'LL GO CHECK ON EM. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

07-05-2002, 11:57 PM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	I MAY BE ABLE TO COME UP WITH SOME CAPS TOO __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

07-06-2002, 12:01 AM	#7
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	ANDY -- HE'S TALKING ABOUT THE PLASTIC CAPS THAT GO ON THE WINDOW FRAME ABOVE THE WING VENTS. THEY'RE HARDER TO COME BY THAN HENS TEETH, AN NOBODYS REPRODUCING THEM. __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

07-05-2002, 11:46 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Just get a truck door and hack off the upper part. Much cheaper.

07-06-2002, 12:03 AM	#8
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	There is plastic caps on the place were the truck door windowhoop is at. __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

07-06-2002, 12:04 AM	#9
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	Ditto!!!!! LOL! __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

07-06-2002, 12:08 AM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Ahhhh, ok. Only seen one blazer worth looking at, and that was in march. Plus I was excited becouse we were picking up the longhorn Attached Images

07-06-2002, 12:10 AM	#11
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	But this is why longhornjeff and I were there though. Attached Images

07-06-2002, 12:12 AM	#12
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	What happen to tuck behind the blazer? __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

07-06-2002, 12:17 AM	#13
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	We towed it from PA to my house here in Columbus Ohio...that's my one ton Longhorn.

07-06-2002, 12:20 AM	#14
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	oops forgot the pic...this was taken on the PA toll road at about 50 MPH....white nuckle ride...scared to look in the mirrors. I never did figure which truck was in charge there...the blazer was actually way under weight to do this task. Attached Images

07-06-2002, 12:25 AM	#16
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	I bet that was fun!!! __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

07-06-2002, 12:29 AM	#17
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Other than the wig-wag of the rear end of the blazer, it was awsome. Road trips...trucks...lotsa Mtn dew, and meeting board members....what else could you ask for? It has a Eaton Corp in it. Attached Images



Register or Log In To remove these advertisements.

07-06-2002, 12:31 AM	#18
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	How many members have you met? __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

07-06-2002, 12:36 AM	#19
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Just those two.

07-06-2002, 12:39 AM	#20
Heavy-Chevy Registered User Join Date: Jul 2000 Location: Ennis (& Styx),Texas Posts: 1,325	cool............ __________________ TRUCKS & Autos that run: 1972 GMC Sierra Grande 3/4ton LWB 4x4 1972 Chevrollet K/5 with a 6"Lift, 462 heads "money pit" 1988 K3500 Crew "Big Red" 4x4 PARTS OR PROJECT TRUCKS: PARTS for sale or trade: WANT : 1972 parts blazer/Jimmy parts truck 1967-72 Parts Chevy/GMC Truck NEED stainless hubcap for 3/4ton GMC

Register or Log In To remove these advertisements.