KS 71 blazer getting parted - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970BLZCST · 03-30-2011, 06:14 PM

How about the high tunnel for the 4 speed, still available? Zip 97383

47thriftmaster · 03-30-2011, 08:00 PM

Hey Randy,
PM sent on the parts you have for me. Thanks, Monte

teeitup · 03-30-2011, 10:51 PM

Dirt1972, yes your first in line on it, I'll try to get pics Thurs but it may be Fri. I have a meeting tomorrow night
Thanks Randy

teeitup · 03-30-2011, 10:51 PM

1970BLZCST, its not in the best of shape, I can get pics for you. $10 plus shipping. Thanks Randy

teeitup · 03-30-2011, 10:52 PM

Hey Monte, no problem, we can wait and see on the other stuff. Thanks Randy

47thriftmaster · 03-31-2011, 07:38 PM

Randy,
Thank you, sounds good. Monte

chalet2506 · 03-31-2011, 09:13 PM

Randy,

Thinking about converting my 72 to a 4 spd. Let me know what you'd need for the tranny w/adapter and t-case, pedal assembly, clutch linkage and brackets, and transmission hump(if 1970 doesn't want it). Also the steering column if it's fixable.

If you can palletize it, I can arrange for a truckline to pick it up.

Thanks. Kurtis

teeitup · 03-31-2011, 11:24 PM

chalet, Kurtis, I'd rather sell it complete. I'm going to give it a few days on here and and local craigslist before I part out the undercarraige. If I decide to part it out, I'll pm you. Thanks Randy

teeitup · 03-31-2011, 11:25 PM

1970BLZCST, the high hump is junk, its rusted on both side and cut around transfer shifter, sorry. Thanks Randy

teeitup · 03-31-2011, 11:32 PM

pics for more parts taken off
emblems have some light pitting but not bad
rear patch has some bondo, I think its good from rear of side marker back, basically last 6 or 7 inches

teeitup · 03-31-2011, 11:38 PM

shifter
steering shaft
ac control

teeitup · 03-31-2011, 11:43 PM

clutch/brake pedal setup
booster setup

teeitup · 03-31-2011, 11:46 PM

clutch linkage
transfer shifter

teeitup · 03-31-2011, 11:50 PM

rear wiring harness
speedo cable and tranny gear

teeitup · 03-31-2011, 11:54 PM

tranny adapter gear
ac boxes

teeitup · 03-31-2011, 11:57 PM

under floor bucket seat bracket
windshiled cowl area

teeitup · 04-01-2011, 12:00 AM

pics for Monte, the chrome is faded on shims

teeitup · 04-01-2011, 12:05 AM

wheels are sold, chassis is all there except front driveshaft and locking hubs

teeitup · 04-01-2011, 12:07 AM

transfer and tranny

teeitup · 04-01-2011, 12:19 AM

Guys I've had some pm's about the body and tub, it is junk, rusted no good, as you can see I cut the driver quarter off and also the windshield frame, and bucket seat brace, these were the only good body parts. Thanks Randy

badpeanut · 04-02-2011, 09:52 AM

How much for the hitch? Any pictures of how it mounts to the frame?

teeitup · 04-02-2011, 10:06 AM

$30 plus shipping on it, I can get pics of sitting on frame the way it was mounted this afternoon. Thanks Randy

teeitup · 04-02-2011, 04:17 PM

Wes, it mounts on frame with rear part (bottom side, it was hard to hold up underneath) and front brackets mounts to bumper brackets and the upright mounts to tag bracket

DBear · 04-02-2011, 04:32 PM

pm and funds sent on wheels Randy...thanks again bud

**FRENCHBLUE72** · 04-02-2011, 04:56 PM

How much for the rear quarter section that you cut out? Im sure shipping would be a killer but who knows.. And I really only need from the rear of the marker light back that may save me a few $$

03-30-2011, 06:14 PM	#126
1970BLZCST Registered User Join Date: Feb 2011 Location: Stayton, Oregon Posts: 39	Re: 71 blazer getting parted How about the high tunnel for the 4 speed, still available? Zip 97383

03-30-2011, 08:00 PM	#127
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 71 blazer getting parted Hey Randy, PM sent on the parts you have for me. Thanks, Monte

03-30-2011, 10:51 PM	#128
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Dirt1972, yes your first in line on it, I'll try to get pics Thurs but it may be Fri. I have a meeting tomorrow night Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2011, 10:51 PM	#129
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted 1970BLZCST, its not in the best of shape, I can get pics for you. $10 plus shipping. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2011, 10:52 PM	#130
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Hey Monte, no problem, we can wait and see on the other stuff. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 07:38 PM	#131
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 71 blazer getting parted Randy, Thank you, sounds good. Monte

03-31-2011, 09:13 PM	#132
chalet2506 Registered User Join Date: Nov 2008 Location: DFW, Tx Posts: 39	Re: 71 blazer getting parted Randy, Thinking about converting my 72 to a 4 spd. Let me know what you'd need for the tranny w/adapter and t-case, pedal assembly, clutch linkage and brackets, and transmission hump(if 1970 doesn't want it). Also the steering column if it's fixable. If you can palletize it, I can arrange for a truckline to pick it up. Thanks. Kurtis

03-31-2011, 11:24 PM	#133
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted chalet, Kurtis, I'd rather sell it complete. I'm going to give it a few days on here and and local craigslist before I part out the undercarraige. If I decide to part it out, I'll pm you. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 11:25 PM	#134
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted 1970BLZCST, the high hump is junk, its rusted on both side and cut around transfer shifter, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 11:32 PM	#135
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted pics for more parts taken off emblems have some light pitting but not bad rear patch has some bondo, I think its good from rear of side marker back, basically last 6 or 7 inches Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-31-2011 at 11:33 PM.

03-31-2011, 11:38 PM	#136
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted shifter steering shaft ac control Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 11:43 PM	#137
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted clutch/brake pedal setup booster setup Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 11:46 PM	#138
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted clutch linkage transfer shifter Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-31-2011, 11:50 PM	#139
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted rear wiring harness speedo cable and tranny gear Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-31-2011 at 11:51 PM.

03-31-2011, 11:54 PM	#140
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted tranny adapter gear ac boxes Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

03-31-2011, 11:57 PM	#141
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted under floor bucket seat bracket windshiled cowl area Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-01-2011, 12:00 AM	#142
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted pics for Monte, the chrome is faded on shims Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-01-2011, 12:05 AM	#143
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted wheels are sold, chassis is all there except front driveshaft and locking hubs Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-01-2011, 12:07 AM	#144
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted transfer and tranny Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-01-2011, 12:19 AM	#145
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Guys I've had some pm's about the body and tub, it is junk, rusted no good, as you can see I cut the driver quarter off and also the windshield frame, and bucket seat brace, these were the only good body parts. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2011, 09:52 AM	#146
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,755	Re: 71 blazer getting parted How much for the hitch? Any pictures of how it mounts to the frame? __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

04-02-2011, 10:06 AM	#147
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted $30 plus shipping on it, I can get pics of sitting on frame the way it was mounted this afternoon. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2011, 04:17 PM	#148
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 71 blazer getting parted Wes, it mounts on frame with rear part (bottom side, it was hard to hold up underneath) and front brackets mounts to bumper brackets and the upright mounts to tag bracket Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-02-2011 at 04:18 PM.

04-02-2011, 04:32 PM	#149
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 861	Re: 71 blazer getting parted pm and funds sent on wheels Randy...thanks again bud

04-02-2011, 04:56 PM	#150
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 71 blazer getting parted How much for the rear quarter section that you cut out? Im sure shipping would be a killer but who knows.. And I really only need from the rear of the marker light back that may save me a few $$ __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. Last edited by FRENCHBLUE72; 04-02-2011 at 04:57 PM.

Register or Log In To remove these advertisements.