67gmc big block? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67north · 03-23-2011, 11:03 PM

anyone know what is needed to fit a bigblock into a 67 gmc and have it work nicely?

dan42 · 03-23-2011, 11:52 PM

I moved this for you to over here - you'll have better response. Someone I'm sure has done it before.

clos69 · 03-24-2011, 01:02 AM

Subscribed...as i am also putting a 454 in my 67... so far I have bought some 72bbc motor mounts,4row radiator, and rad hold downs. I have a 6banger in there now...what do you have??

67north · 03-24-2011, 06:26 AM

i have the 72 mounts also a rebuilt 700r4 and 425 horse 1968 396

dan42 · 03-24-2011, 09:43 AM

ttt for you

GASoline71 · 03-24-2011, 10:38 AM

Make sure that Overdrive tranny is up to the task of handling over 400 hp and lots of torque.

Gary

**Classic Heartbeat** · 03-24-2011, 12:37 PM

This whole procedure is covered in my 67 panel project page in my website. Here is the link: http://www.classicheartbeat.com/67_panel_project.htm
WES

stsalvage · 03-24-2011, 12:48 PM

Quote:

Originally Posted by GASoline71

Make sure that Overdrive tranny is up to the task of handling over 400 hp and lots of torque.

Gary

Hay Gary HP has very little to do with the 700R4 its the torque. them alum teeth inside the case that holds the sprag in to much torque is like you opening you mouth and putting you teeth on the cement and having some one kick you from the back of the head.the alum teeth in the case don't like Lots of torque small blocks can't push out that much But the stoker 383 or the destroyed 377 will rip teeth off the 700R4 but the 400 man you will blow2 up the engine before you hurt that trans

67north · 03-24-2011, 06:32 PM

the trans has been built to hold up if not i happen to have a couple of spares sitting on a shelf and a wall of parts
thanks to everyone for the info this truck has been a dream of mine since i was a child once the drive train is finished off i will get onto the body

03-23-2011, 11:03 PM	#1
67north Registered User Join Date: Mar 2011 Location: winnipeg Posts: 3	67gmc big block? anyone know what is needed to fit a bigblock into a 67 gmc and have it work nicely?

03-23-2011, 11:52 PM	#2
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 67gmc big block? I moved this for you to over here - you'll have better response. Someone I'm sure has done it before. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-24-2011, 01:02 AM	#3
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: 67gmc big block? Subscribed...as i am also putting a 454 in my 67... so far I have bought some 72bbc motor mounts,4row radiator, and rad hold downs. I have a 6banger in there now...what do you have?? __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

03-24-2011, 06:26 AM	#4
67north Registered User Join Date: Mar 2011 Location: winnipeg Posts: 3	Re: 67gmc big block? i have the 72 mounts also a rebuilt 700r4 and 425 horse 1968 396

03-24-2011, 09:43 AM	#5
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: 67gmc big block? ttt for you __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

03-24-2011, 12:37 PM	#7
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: 67gmc big block? This whole procedure is covered in my 67 panel project page in my website. Here is the link: http://www.classicheartbeat.com/67_panel_project.htm WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

03-24-2011, 06:32 PM	#9
67north Registered User Join Date: Mar 2011 Location: winnipeg Posts: 3	Re: 67gmc big block? the trans has been built to hold up if not i happen to have a couple of spares sitting on a shelf and a wall of parts thanks to everyone for the info this truck has been a dream of mine since i was a child once the drive train is finished off i will get onto the body



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.