88 GMC suburban oil pan ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lugnut · 06-01-2004, 09:05 AM

Does anyone know if I can drop the oil pan in my 88 GMC suburban, 1/2 ton, 4X4, 350 auto, with the engine in? I need to replace the pan and would like to do it without pulling the engine. It looks like there is plenty of clearance. What do I do where it meets up to the timing chain cover? Anything special that needs to be done? Thanks.

**kwmech** · 06-03-2004, 01:26 AM

First you drain the oil and second you remove the filter and third you remove the bolts. It is as easy as it looks.

Jonboy · 06-03-2004, 03:13 PM

Yep. That should have the one piece oil pan gasket. Makes reassembly a breeze, especially in a 4wd. Why do you have to replace the oil pan?

lugnut · 06-03-2004, 06:06 PM

totally shreddit the oil plug and cannot get an oversized one to seal...in fact the little du-hicky on the inside of the pan where the threads are, broke away from the spotwelds so there isnt anything to rethread into. Not a big deal, i have an extra pan, but just didnt know if it would clear the front Xmember. Thanks for the help

Jonboy · 06-04-2004, 09:02 AM

I was hoping for an off road carnage story....

Replacement should pe pretty easy.

06-01-2004, 09:05 AM	#1
lugnut Registered User Join Date: Feb 2003 Location: Bismarck, ND Posts: 116	88 GMC suburban oil pan ? Does anyone know if I can drop the oil pan in my 88 GMC suburban, 1/2 ton, 4X4, 350 auto, with the engine in? I need to replace the pan and would like to do it without pulling the engine. It looks like there is plenty of clearance. What do I do where it meets up to the timing chain cover? Anything special that needs to be done? Thanks. __________________ 1967 Chevrolet 1/2 ton 4x4 1972 GMC 1/2 ton 4x4 2005 1500 4x4 Suburban 2004 GMC Envoy 4x4 (wife's)

06-03-2004, 03:13 PM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Yep. That should have the one piece oil pan gasket. Makes reassembly a breeze, especially in a 4wd. Why do you have to replace the oil pan? __________________ 1974 Jimmy- 5.3/4L80e/NP241

06-03-2004, 06:06 PM	#4
lugnut Registered User Join Date: Feb 2003 Location: Bismarck, ND Posts: 116	oil pan totally shreddit the oil plug and cannot get an oversized one to seal...in fact the little du-hicky on the inside of the pan where the threads are, broke away from the spotwelds so there isnt anything to rethread into. Not a big deal, i have an extra pan, but just didnt know if it would clear the front Xmember. Thanks for the help __________________ 1967 Chevrolet 1/2 ton 4x4 1972 GMC 1/2 ton 4x4 2005 1500 4x4 Suburban 2004 GMC Envoy 4x4 (wife's)

06-04-2004, 09:02 AM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	I was hoping for an off road carnage story.... Replacement should pe pretty easy. __________________ 1974 Jimmy- 5.3/4L80e/NP241

06-03-2004, 01:26 AM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,402	First you drain the oil and second you remove the filter and third you remove the bolts. It is as easy as it looks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.