Pics of hood mod - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

weasel29gm · 01-08-2006, 12:11 PM

I agree with Cliff, better than shelf stuff. One change I'd make, cut openin's half way back and fit your grill piece on a angle to front. That would keep the rain out of the bay. A buddy did a Mustang like that and worked and looked factory. Still sucks air and gives the same effect. Love the look !!!!!!!!! And cheaper than a cowl hood LOL!!!!!

**tnblazerk5** · 01-08-2006, 12:34 PM

i like it

what year hood is the one you are workin on ? i know you said you cut parts out of a 72 hood and the way i understood it you was putting the hood scoops (whitch are going to be killer lookin when done ) on a 67-68 hood , the hood i see in the pics is not a 67-68 hood , its a 69 up hood or is it just my eyes (i still cant see well since i got sick

)

Inthuwind · 01-08-2006, 12:37 PM

That's the '72 hood TnBlazer~and thanks for the grille opening tip Weasel

**tnblazerk5** · 01-08-2006, 12:39 PM

Quote:

Originally Posted by Inthuwind

That's the '72 hood TnBlazer~and thanks for the grille opening tip Weasel

ok thanks i thought my eyes were messin with me again

where is Raeford, NC. ? are you going to go to the truck nats in maggy valley nc this summer ?

Inthuwind · 01-08-2006, 12:39 PM

Oops, the one I'm placing the scoops on is my '68.

**tnblazerk5** · 01-08-2006, 12:55 PM

Quote:

Originally Posted by Inthuwind

Oops, the one I'm placing the scoops on is my '68.

this is a 69 up hood

a 67-68 hood the front part of the hood is sloped more
has the front clip been changed on you truck ?

Inthuwind · 01-08-2006, 01:05 PM

Yeah THATS the '72 hood I cut it out on--My '68 hood is standing over by a wall. Sorry for any confusion there.

**tnblazerk5** · 01-08-2006, 01:15 PM

Quote:

Originally Posted by Inthuwind

Yeah THATS the '72 hood I cut it out on--My '68 hood is standing over by a wall. Sorry for any confusion there.

its ok i get confused all the time easy

and its lookin good by the way

Inthuwind · 01-08-2006, 07:08 PM

I agree. The BelAir look would be killer especially with the hood ornament.

**Yukon Jack** · 01-08-2006, 07:28 PM

I think it is a great looking touch you are adding to your truck. Thumbs up from me.

Inthuwind · 01-08-2006, 07:35 PM

TnBlazer--Raeford is 13 miles west of Fayetteville. I am stationed at Pope Air Force Base. I'm not sure about the Nats yet. Depends if I'm sent to Iraq or not.

HEAVY CHEVY · 01-09-2006, 09:40 AM

Inthuwind we have a show coming to Charlotte in the middle of April.It has alot of members there.
I live up in Sanford not too far from ya.Did ya get that 72 hood from Nathaniel Grove?

Inthuwind · 01-09-2006, 12:30 PM

No-I bought a '72 truck(whole) just for the 5 lug disc axles and 12 bolt rear, then grabbed a few pieces off it before i sent it off on a roll back. I took the hood off it so I could make my 442 scoops for the '68 I'm building. I made '05's showing at Charlotte. That was a big show. Hopefully if I'm not deployed, I'll make this one as well. You're pretty close to the base here. We'll have to meet up some time. Maybe you can help me find some parts.

Joe67 · 01-09-2006, 12:37 PM

Very nice!

Now that is custom

*FormerMember* · 01-09-2006, 12:41 PM

Heh, want to make more of them? I don't have the body skills to do it... I may just tinker a bit though.

Inthuwind · 01-09-2006, 12:55 PM

This is going to be a slow process. I haven't even bought a welder yet-lol. I wish I could mass produce these. If I ever do, this board will be the first place I'd offer. I'll let ya'll know as soon as mine is finished. I may do a couple after this one is done. I'd hate to ruin SOMEONE else's hood--

Inthuwind · 01-09-2006, 12:56 PM

By the way 67C10, how are you coming on your stepside?

***Liz*** · 01-09-2006, 08:23 PM

Quote:

Originally Posted by Inthuwind

You're pretty close to the base here. We'll have to meet up some time. Maybe you can help me find some parts.

hmpft

you said there wasn't a chance in hatis you would meet up!! whats the diff between him n me huh ?

Anyways, just be warned if you meet him, your stuck w me too

n to keep on topic

thats look is kick ass imho

Inthuwind · 01-09-2006, 08:59 PM

Uh OHHHHH~Man am I in sh!t creek!!!!LOL~~Well, I tried to talk to ya the other day on the chatbox but couldn't get a response. I'd like to meet as many of us I can(including you)

~~thanks Liz

Quote:

Originally Posted by Liz

hmpft

you said there wasn't a chance in hatis you would meet up!! whats the diff between him n me huh ?

Anyways, just be warned if you meet him, your stuck w me too

n to keep on topic

thats look is kick ass imho

Deuce · 01-15-2006, 11:30 PM

That looks Damn SEXY!!!!

muddyole 69 · 01-16-2006, 01:52 AM

Love the color choice, had a mini few years ago same color had 2.2 charger hood scoop grafted on hood 78 transam air extractors on fenders chevette square tail lights out back original tail lights and gate smoothed to match the body lines 4/6 drop boyd fluted stars customized the factory grille mono paint job best of all did it myself, the feeling when someone asks who built it is priceless.... I figure you will experience that a bunch because your truck will draw a crowd whereever it goes as its gonna be sweet !!!! keep us posted Mike

Inthuwind · 01-16-2006, 05:18 PM

Check out the latest updates on my link below on my hood scoops//last pages

hgs_notes · 01-16-2006, 08:00 PM

Just my opinion, but I think it would look better if the middle ridge were removed. If you look at the 1:64 scale Jada trucks, they have a smooth hood, and I kinda like it. I was thinking about making one from a 67-68 hood and fitting it on my 71. I had also thought about ram air through the front of my original hood. I've seen a few models and concepts from the 60's that did it.

HG

matthufham · 02-22-2006, 12:03 AM

bump, how's this project coming along? i can't wait to see it finished.

Inthuwind · 02-22-2006, 07:27 AM

I've stopped body work right now just to get my suspension finished up. I'm trying to install bags while everythings off the frame. I'll keep you posted when the scoops go on.~~Thanks for the interest.

01-08-2006, 12:11 PM	#26
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Re: Pics of hood mod I agree with Cliff, better than shelf stuff. One change I'd make, cut openin's half way back and fit your grill piece on a angle to front. That would keep the rain out of the bay. A buddy did a Mustang like that and worked and looked factory. Still sucks air and gives the same effect. Love the look !!!!!!!!! And cheaper than a cowl hood LOL!!!!! __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

01-08-2006, 12:34 PM	#27
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	Re: Pics of hood mod i like it what year hood is the one you are workin on ? i know you said you cut parts out of a 72 hood and the way i understood it you was putting the hood scoops (whitch are going to be killer lookin when done ) on a 67-68 hood , the hood i see in the pics is not a 67-68 hood , its a 69 up hood or is it just my eyes (i still cant see well since i got sick )

01-08-2006, 12:37 PM	#28
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod That's the '72 hood TnBlazer~and thanks for the grille opening tip Weasel __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-08-2006, 12:39 PM	#30
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod Oops, the one I'm placing the scoops on is my '68. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-08-2006, 01:05 PM	#32
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod Yeah THATS the '72 hood I cut it out on--My '68 hood is standing over by a wall. Sorry for any confusion there. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-08-2006, 07:08 PM	#34
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod I agree. The BelAir look would be killer especially with the hood ornament. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-08-2006, 07:28 PM	#35
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Re: Pics of hood mod I think it is a great looking touch you are adding to your truck. Thumbs up from me. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

01-08-2006, 07:35 PM	#36
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod TnBlazer--Raeford is 13 miles west of Fayetteville. I am stationed at Pope Air Force Base. I'm not sure about the Nats yet. Depends if I'm sent to Iraq or not. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-09-2006, 09:40 AM	#37
HEAVY CHEVY BOWTIE FOREVER Join Date: Mar 2002 Location: Sanford,N.C. 23770 Posts: 273	Re: Pics of hood mod Inthuwind we have a show coming to Charlotte in the middle of April.It has alot of members there. I live up in Sanford not too far from ya.Did ya get that 72 hood from Nathaniel Grove? __________________ 69 C-10 SHORT FLEET BED 350 4-BOLT/400 turbo upper & lower molding 65 IMPALA 2-DR 283/POWERGLIDE 66 IMPALA 2-DR hopefully 283/350 ~ CAMELTOE ROCKS ~

01-09-2006, 12:30 PM	#38
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod No-I bought a '72 truck(whole) just for the 5 lug disc axles and 12 bolt rear, then grabbed a few pieces off it before i sent it off on a roll back. I took the hood off it so I could make my 442 scoops for the '68 I'm building. I made '05's showing at Charlotte. That was a big show. Hopefully if I'm not deployed, I'll make this one as well. You're pretty close to the base here. We'll have to meet up some time. Maybe you can help me find some parts. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-09-2006, 12:37 PM	#39
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: Pics of hood mod Very nice! Now that is custom __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

01-09-2006, 12:41 PM	#40
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Pics of hood mod Heh, want to make more of them? I don't have the body skills to do it... I may just tinker a bit though.

01-09-2006, 12:55 PM	#41
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod This is going to be a slow process. I haven't even bought a welder yet-lol. I wish I could mass produce these. If I ever do, this board will be the first place I'd offer. I'll let ya'll know as soon as mine is finished. I may do a couple after this one is done. I'd hate to ruin SOMEONE else's hood-- __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-09-2006, 12:56 PM	#42
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod By the way 67C10, how are you coming on your stepside? __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-15-2006, 11:30 PM	#45
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: Pics of hood mod That looks Damn SEXY!!!! __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!



Register or Log In To remove these advertisements.

01-16-2006, 01:52 AM	#46
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Pics of hood mod Love the color choice, had a mini few years ago same color had 2.2 charger hood scoop grafted on hood 78 transam air extractors on fenders chevette square tail lights out back original tail lights and gate smoothed to match the body lines 4/6 drop boyd fluted stars customized the factory grille mono paint job best of all did it myself, the feeling when someone asks who built it is priceless.... I figure you will experience that a bunch because your truck will draw a crowd whereever it goes as its gonna be sweet !!!! keep us posted Mike __________________ hav'n fun be'n me

01-16-2006, 05:18 PM	#47
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod Check out the latest updates on my link below on my hood scoops//last pages __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it." Last edited by Inthuwind; 01-16-2006 at 05:18 PM.

01-16-2006, 08:00 PM	#48
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,107	Re: Pics of hood mod Just my opinion, but I think it would look better if the middle ridge were removed. If you look at the 1:64 scale Jada trucks, they have a smooth hood, and I kinda like it. I was thinking about making one from a 67-68 hood and fitting it on my 71. I had also thought about ram air through the front of my original hood. I've seen a few models and concepts from the 60's that did it. HG __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-22-2006, 12:03 AM	#49
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Pics of hood mod bump, how's this project coming along? i can't wait to see it finished.

02-22-2006, 07:27 AM	#50
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Pics of hood mod I've stopped body work right now just to get my suspension finished up. I'm trying to install bags while everythings off the frame. I'll keep you posted when the scoops go on.~~Thanks for the interest. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

Register or Log In To remove these advertisements.