I need a cup holder. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrod4202 · 09-23-2013, 11:40 AM

you can go to: www.cupholders.com
they have a nice cup holder for 67-72 chevy pick-ups.

original-71 · 09-23-2013, 11:54 AM

www.cupholdersplus.com

74baggedbug · 09-23-2013, 05:05 PM

My cup holder in my 68
Posted via Mobile Device

68gmsee · 09-23-2013, 05:22 PM

Made my own and bolted it to the heater control bolts with aluminum 1 inch strips. Hold solid and the openings are 4". Holds a foam cozy, large cup or a coffee mug.

mmiddle · 09-23-2013, 06:13 PM

Quote:

Originally Posted by Mister-B

You could try using one of these in the center bench seat lol

Posted via Mobile Device

This is what I use as well. This item works really good and can unwrap fast food for you too. This really is the perfect multi-purpose accessory. It's awful expensive though.

HIGHWAY BY THE SEA · 09-23-2013, 07:27 PM

Quote:

Originally Posted by 71K20chevy

I got mine at Dollar General...they go into the window slot.

Cost a whopping $2 for both of them.

Those things absolutely SUCK!!! I had one fall on the floor with a large soda held in it in my 1968 19 years ago!! All I did was hit a small bump and then **KERBLOOSH** all over the floor!!

grancuda · 09-23-2013, 08:02 PM

I thought all these trucks came with cup holders....

Posted via Mobile Device

sboris · 09-23-2013, 08:30 PM

Quote:

Originally Posted by grancuda

I thought all these trucks came with cup holders....

Posted via Mobile Device

They do! I think your supposed to be parked though..

Posted via Mobile Device
Posted via Mobile Device

swamp rat · 09-23-2013, 09:19 PM

I have one like this but i don't like it, your drink is right in front of the stereo..:

http://www.cupholdersplus.com/product/GMTR7387PC.html

I also have this console (EDIT: 39223), i like it pretty well:

http://www.rampageproducts.com/Catalog/Page26.html

Lattimer · 09-23-2013, 09:36 PM

Quote:

Originally Posted by Jayschevy

I got something similar to this. I found one a little longer and cheaper. It straps to my bench seat and works great. The center console is a plus. It's a must on long drives.

http://www.ebay.com/itm/Hot-Rod-Cup-...ht_2525wt_1230

Thats the one I have. Works decent and looks ok.

am0254338 · 09-23-2013, 11:04 PM

I do Automotive upholstery and trim and sewed up the cover for this seat. He wanted a cup holder so this was the best thing i could think of....made out of wood and covered in vinyl. Used aluminum poker table cup holders for the actual holders. Pretty simple, effective, and fairly tight against the seat and out of the way even for someone sitting in the middle.

Thanks,
Andy

Syndrome · 09-24-2013, 06:17 PM

Quote:

Originally Posted by grancuda

http://www.santanainteriors.com/products/billet/
Posted via Mobile Device

I think this one is awesome. To bad they don't list the diameter size though.

Quote:

Originally Posted by mmiddle

This is what I use as well. This item works really good and can unwrap fast food for you too. This really is the perfect multi-purpose accessory. It's awful expensive though.

I see what you did there..

**bigmac73** · 09-24-2013, 07:26 PM

Quote:

Originally Posted by sstone69

I posted this a few weeks ago. I had been looking for a cup holder(s) and also wanted to add two more speakers without putting in the kick panel speaker option. In the past I have cut holes in the doors in other trucks, but the speakers would get wet. So my son and I built this earlier in the summer. As you can see it has been tested and passed !!. It has a place for phones and other stuff. Speakers sound great because they are enclosed in the box. The cups are supported by two 4" PVC pipes cut to about 4 " long. Cool thing is that the only extra expense was the black paint and the speakers. All the rest we used scrap lumber and PVC pipe. Also, if I want to I can disconnect the two speaker wires and then remove the whole box.

Stone,
would you be interested in building one of those for me, with holes to fit 6 inch speakers?? would pay

gotchamel · 09-24-2013, 09:23 PM

A little more than a cup holder but it will hold a cup
Posted via Mobile Device

ole dollor · 09-24-2013, 10:11 PM

Quote:

Originally Posted by xmitsu10

Here's a cup holder idea that I got from this board years ago and I still get a lot of positive remarks on it. Just checked and it's still available on Amazon, but I got mine at WalMart. http://67-72chevytrucks.com/vboard/s...ferrerid=25933

Mark
Posted via Mobile Device

good info...I like it

MoFormula · 09-24-2013, 10:25 PM

Quote:

Originally Posted by am0254338

I do Automotive upholstery and trim and sewed up the cover for this seat. He wanted a cup holder so this was the best thing i could think of....made out of wood and covered in vinyl. Used aluminum poker table cup holders for the actual holders. Pretty simple, effective, and fairly tight against the seat and out of the way even for someone sitting in the middle.

Thanks,
Andy

I would love one of those. Could you build another? How much?

Brian

**bigmac73** · 09-26-2013, 10:35 AM

Quote:

Originally Posted by sboris

They do! I think your supposed to be parked though..

Posted via Mobile Device
Posted via Mobile Device

that glove box model works best at Sonic

1badcholo · 09-26-2013, 03:06 PM

I purchased mine at Oreilly's I bolted it to a few fab'd pieces of angle iron and to the bottom of the seat. They are adjustable. Sorry the pic is a little blurry.
The seats are off of a 2010 R@m pick up, just in case someone asks.

kaycee · 09-26-2013, 07:14 PM

Grabbed this at the salvage yard ($5) from a 04 Chevy took a coupls pieces of 1" flat stock and mounted to bottom of seat frame.Console sits about 6" above floor and slides with the seat.

jimbosprint · 04-14-2015, 09:49 AM

Here's my new cup holder. Really simple - made from a $9 parts store cup holder and a painted piece of plywood. It stays put without being bolted to the floor (also makes it easy to take out), and it holds large or small drinks.

Name: 20150409_133208.jpg
Views: 1760
Size: 47.1 KB

Name: 20150409_133208.jpg
Views: 1760
Size: 47.1 KB

Name: 20150409_160332.jpg
Views: 2174
Size: 40.2 KB

*Fitz* · 04-14-2015, 10:09 AM

Quote:

Originally Posted by 70CHEVYBB

I really do not like not having a cup holder. I do not want a cheezee looking one . How about some pics of cup holders with a bench seat.

You do not want a cheezee looking one ??? They ALL look cheezee. Some even look ridiculous. Like the ones my friend put on his Harley Bagger. One on each side of the fairing in front and one in each arm of the barcalounger his wife rides in in back. I asked him how it felt driving his living room sofa around. He didn't get it.

Lanman1972 · 04-14-2015, 10:12 AM

Autozone $22 on the clearance table!

cla511 · 04-14-2015, 12:39 PM

I keep a roll of Duct tape under the seat. It is the perfect size for all bottles and cans and is very stable and will not slide. Yet another use for the magic stuff. And its far cheaper than a hot chick in the middle. But if you have one she might be into a little duct tape as well.

Steve Cole · 04-14-2015, 02:00 PM

Quote:

Originally Posted by kaycee

Grabbed this at the salvage yard ($5) from a 04 Chevy took a coupls pieces of 1" flat stock and mounted to bottom of seat frame.Console sits about 6" above floor and slides with the seat.

Genius! I like it!

Longhorn 70 · 04-14-2015, 02:55 PM

Ahhh. I wish I had pics of mine....

Just imagine if you will..... A new roll of Duck Tape sitting on the hump. It was functional, adjustable, stable, and "cheezee".

09-23-2013, 11:40 AM	#26
hotrod4202 Registered User Join Date: Sep 2013 Location: danville,virginia Posts: 16	Re: I need a cup holder. you can go to: www.cupholders.com they have a nice cup holder for 67-72 chevy pick-ups.

09-23-2013, 11:54 AM	#27
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: I need a cup holder. www.cupholdersplus.com Attached Images __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

09-23-2013, 05:05 PM	#28
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 699	Re: I need a cup holder. My cup holder in my 68 Posted via Mobile Device

09-23-2013, 05:22 PM	#29
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: I need a cup holder. Made my own and bolted it to the heater control bolts with aluminum 1 inch strips. Hold solid and the openings are 4". Holds a foam cozy, large cup or a coffee mug. __________________ 68 GMC 250/3 speed Saginaw p/b p/s 69 Chevy 350/350 currently in pieces still lookin for a cab 06 Trailblazer I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive...

09-23-2013, 08:02 PM	#32
grancuda Registered User Join Date: Nov 2007 Location: Central OK Posts: 396	Re: I need a cup holder. I thought all these trucks came with cup holders.... Posted via Mobile Device

09-23-2013, 09:19 PM	#34
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: I need a cup holder. I have one like this but i don't like it, your drink is right in front of the stereo..: http://www.cupholdersplus.com/product/GMTR7387PC.html I also have this console (EDIT: 39223), i like it pretty well: http://www.rampageproducts.com/Catalog/Page26.html __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

09-23-2013, 11:04 PM	#36
am0254338 Registered User Join Date: Nov 2012 Location: Wasola, mo Posts: 163	Re: I need a cup holder. I do Automotive upholstery and trim and sewed up the cover for this seat. He wanted a cup holder so this was the best thing i could think of....made out of wood and covered in vinyl. Used aluminum poker table cup holders for the actual holders. Pretty simple, effective, and fairly tight against the seat and out of the way even for someone sitting in the middle. Thanks, Andy Attached Images

09-24-2013, 09:23 PM	#39
gotchamel Registered User Join Date: Feb 2011 Location: islamorada fl. Posts: 466	Re: I need a cup holder. A little more than a cup holder but it will hold a cup Posted via Mobile Device

09-26-2013, 03:06 PM	#43
1badcholo Registered User Join Date: Oct 2012 Location: Apison, TN Posts: 18	Re: I need a cup holder. I purchased mine at Oreilly's I bolted it to a few fab'd pieces of angle iron and to the bottom of the seat. They are adjustable. Sorry the pic is a little blurry. The seats are off of a 2010 R@m pick up, just in case someone asks. Attached Images

09-26-2013, 07:14 PM	#44
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,445	Re: I need a cup holder. Grabbed this at the salvage yard ($5) from a 04 Chevy took a coupls pieces of 1" flat stock and mounted to bottom of seat frame.Console sits about 6" above floor and slides with the seat. Attached Images __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

04-14-2015, 09:49 AM	#45
jimbosprint Registered User Join Date: Jul 2014 Location: Chico, California Posts: 940	Re: I need a cup holder. Here's my new cup holder. Really simple - made from a $9 parts store cup holder and a painted piece of plywood. It stays put without being bolted to the floor (also makes it easy to take out), and it holds large or small drinks. __________________ '72 Chevrolet C20 Deluxe \| '72 Chevrolet K10 Cheyenne www.jimbosprint.com

04-14-2015, 10:12 AM	#47
Lanman1972 Registered User Join Date: Dec 2013 Location: Omaha NE Posts: 620	Re: I need a cup holder. Autozone $22 on the clearance table! Attached Images

04-14-2015, 12:39 PM	#48
cla511 Registered User Join Date: Aug 2014 Location: Alabama Posts: 50	Re: I need a cup holder. I keep a roll of Duct tape under the seat. It is the perfect size for all bottles and cans and is very stable and will not slide. Yet another use for the magic stuff. And its far cheaper than a hot chick in the middle. But if you have one she might be into a little duct tape as well. __________________ 1972 C10 Cheyenne 402/TH350 1985 GMC 1500 Sierra Classic 350/700R 1986 K20 427/NV4500 1986 K20 Sub 406/TH400 "Life's tough.....It's enough tougher if your stupid." John Wayne

04-14-2015, 02:55 PM	#50
Longhorn 70 Registered User Join Date: Dec 2012 Location: Chandler AZ Posts: 1,149	Re: I need a cup holder. Ahhh. I wish I had pics of mine.... Just imagine if you will..... A new roll of Duck Tape sitting on the hump. It was functional, adjustable, stable, and "cheezee". __________________ 1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.