Bed Floor Questions

[*71SWB*]

I'm still in the hunt for a mat for the bed of my 71 C10 SWB Fleetside. I have found a compnay that says they can custom make the mat however I need the dimensions of the bed floor. I've seen pictures of the steal bed floors showing all the sizes I would need however I now can't find one to obtain the sizes from. Does anyone know or have a pic of the steal bed floor showing all of the sizes?? I would really appraciate it.

[seafoam68]

I have mine apart right now. I can get some tomorrow. What kind of mesurements do you need exactly?

[*71SWB*]

I plan on sending a blown up pic of the bed floor with the dimensions. Im hoping this will ensure a perfect fit length, width, and the fender wells. Thanks for your help.

[Jason Banks]

Who is it that says they can make one?

I had bed mats(rubber) in my longbeds that had cut lines to use them in short beds.

[70cst]

I think the 73-87 bed mats come very close to fitting, Not perfect but close.

[seafoam68]

Hey, sorry I'M just getting back to you. Measured my bed today. All are from the outermost edges of the inside at the floor level. Starting at the front it is 72 inches across. Down the sides is 75.5 inches from front corner to rear corner then steps out across bed for 3.5 inches then back towards rear for 3 inches then across bed (under tailgate) for 65 inches. Hope that's not too confusing. I have custom widened wheel tubs, so I couldn't really give you that measurement but maybe someone else can chime in with it. Good luck.