Name this part - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Paul72 · 10-18-2003, 08:05 PM

Right behind the driver's seat, on the vertical surface before the rear floor, there is a spring mounted with 3 brackets. Any idea what this is for? I saw one on a CST that was in the bone yard, and I looked at mine, but they're gone (holes are there). Just wondering if it's worth picking up?

Thanks,

Paul

bpmcgee · 10-18-2003, 10:00 PM

Paul,

I have one too -- never figured out what it's for. I wondered if it had something to do with the seatbelts, but it really looks like it would end up UNDER the carpet.

Brian

**pound41** · 10-18-2003, 10:01 PM

Thats for holding your jack

gmcnorton · 10-19-2003, 07:58 AM

pound41 is correct..... it's for jack storage

**pound41** · 10-19-2003, 10:52 AM

Does anyone know the correct way the jack sits in that contrapion I took mine out 20+ yrs ago still have it can't remember exactly

LT 72 Jimmy · 10-19-2003, 07:19 PM

I'd appreciate a pic of a jack in that spring thing.

LT

JayDubBlazer · 10-20-2003, 12:52 AM

We were trying to get a pic last week and no one could come up with on. Here is the thread
http://67-72chevytrucks.com/vboard/s...threadid=71588

alta-aj · 11-03-2003, 03:25 AM

I have a complete set of the springs and brackets but before I put them in, I'd like to see how they are supposed to work.

Blue Beard · 11-03-2003, 09:46 AM

Thanks for the thread, have a CST and didn't know what that was for either..........

cheyenne10 · 01-10-2004, 03:30 AM

Did anyone ever find a picture of jack pieces mounted behind seat? Even a picture of the brackets installed without jack handle could help. I couldn't find picture on older threads.

LT 72 Jimmy · 01-10-2004, 11:49 AM

The LMC catalog offers a sticker that has jack storage instructions. I can't tell from the picture if it shows under the bed or behind the seat. I'll order one the next time I need some stuff.

*Gee_Emm* · 01-10-2004, 01:16 PM

I dont think the sticker in the LMC catalog is for Blazers. I dont think they even used stickers.

k5hart · 01-10-2004, 07:32 PM

In fact they did use a sticker on the blazers. It is located on the back of the drivers side wheelwell, so you can see it when looking at the spare tire. Here is a picture.

[img]//img.ranchoweb.com/images/k5hart/jackinstructions2.jpg[/img]

As you can see mine is in bad shape, but I think I can still make out the instructions looking at it close up. Give me until tomorrow guys and I will try to put my jack and accessories in according to how the instructions say. I will take pictures for you.

k5hart · 01-10-2004, 07:46 PM

I think my pictures are being difficult today. Try 2......

k5hart · 01-10-2004, 07:53 PM

Another point to add that everyone may not know. The jack is actually mounted in the back behind the spare. This is the holder for it.

The jack handle and the tire iron go behind the back seat. At least this is the best I can tell from the sticker. I will try to get this done tomorrow. Hope this helps.

*Gee_Emm* · 01-10-2004, 09:12 PM

Copy and paste the link for the red x guys. Wow this is like the holy grail. We are finally going to see a jack in place. I have been trying to find this info for months. I even went to the point of emailing people on ebay that were selling Blazers and Jimmys to see if their jacks were in place. Vendors, what are the chances of getting that decal reproduced? I guess the trick would be to find one intact.

That is the first time I have ever seen that decal and probably the first time for everyone on this board since nobody knows how to place the jack.

skid · 01-10-2004, 09:36 PM

When I purchased my 72 blazer it had the jack, crank, and wrench all mounted behind the drivers seat. It looked like it all belonged there. The people I bought the truck off of never removed or modified anything so I think that was the way my particular truck came from the factory. There was no mounting lug behind the spare tire carrier on mine, and the seat and spare tire carrier were never removed, judging from the looks of the truck. Unfortunately, I have completely gutted the interior so I can't show any pics.

**pound41** · 01-11-2004, 12:31 AM

ditto! mine came from the original owner and the first thing I did 22yrs ago was yank that neatly tuck jack and its parts from behind the drivers seat. what a dumba$$ Have all the parts just not exactly sure how they went

k5hart · 01-11-2004, 01:50 AM

UGGGHH! Sorry for the red x's guys. Lets try again.

Not to start an argument skid, but my blazer is in the same category. Very original and not much modified. Mine is a CST 2-wheel drive, if that might make a difference. I wouldn't see why, but who knows. Funny how things can be different from truck to truck.

*Gee_Emm* · 01-11-2004, 02:34 AM

I wonder if the trucks with exterior carriers would have had the decal.

skid · 01-11-2004, 04:21 AM

K5hart, I just looked at the bed of my truck and do have the two holes for the jack mount by the spare tire carrier. Mine must have been taken out at some point in time.

72 CustomCamper · 01-11-2004, 04:24 PM

spring behind drivers seat

71Blazer · 01-11-2004, 07:49 PM

MORE MORE MORE

k5hart · 01-11-2004, 08:12 PM

Ok everyone are you ready...........heres the jack handle and lug wrench.

I installed mine today as best I could from the sticker. It did not seem as difficult as I thought it would be. I am a little questionable on the attachment on towards the middle because this was a part of my sticker that was damaged. I had to guess at it, really it seems like the only way. Everything is held nice a snug, so we'll see if it stays there during normal driving.

Take a look and tell me what you think. Next post the jack......

k5hart · 01-11-2004, 08:19 PM

Now the jack........

Mine is attached in the back. After looking really hard at the sticker (poor thing is in bad shape) I noticed that it said trucks with the optional back seat have the jack mounted in the back. Back seat delete trucks mount up front right above the handle location. This answers why some people have the mount in the back and some do not. Cool......mystery solved. This again was super simple, but holds wonderful. Take a look.

Give me about an hour and I will have a URL that you can go to see about 16 more pics of the whole install.

10-18-2003, 08:05 PM	#1
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Name this part Right behind the driver's seat, on the vertical surface before the rear floor, there is a spring mounted with 3 brackets. Any idea what this is for? I saw one on a CST that was in the bone yard, and I looked at mine, but they're gone (holes are there). Just wondering if it's worth picking up? Thanks, Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

10-19-2003, 07:58 AM	#4
gmcnorton Registered User Join Date: Aug 2002 Location: Middleport, Pa. 17953 Posts: 737	he's correct pound41 is correct..... it's for jack storage __________________ 70 GMC SHORT STEP , 71 BLAZER ,72 JIMMY,72 BLAZER, JUST NEED THAT SUBURBAN NOW......WANTING MORE

10-20-2003, 12:52 AM	#7
JayDubBlazer go cyclones Join Date: Jun 2003 Location: Ames, IA Posts: 1,885	We were trying to get a pic last week and no one could come up with on. Here is the thread http://67-72chevytrucks.com/vboard/s...threadid=71588 __________________ Wes PROJECT OLE GREEN 1972 Blazer 4X4 350/700R4 2017 Silverado LT

11-03-2003, 03:25 AM	#8
alta-aj Registered User Join Date: Aug 2001 Location: Qualicum Beach, B.C>, Canada Posts: 117	I'd like to see a pic as well. I have a complete set of the springs and brackets but before I put them in, I'd like to see how they are supposed to work.

11-03-2003, 09:46 AM	#9
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Thanks for the thread, have a CST and didn't know what that was for either.......... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

10-18-2003, 10:00 PM	#2
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Paul, I have one too -- never figured out what it's for. I wondered if it had something to do with the seatbelts, but it really looks like it would end up UNDER the carpet. Brian

10-18-2003, 10:01 PM	#3
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,267	Thats for holding your jack

10-19-2003, 10:52 AM	#5
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,267	Does anyone know the correct way the jack sits in that contrapion I took mine out 20+ yrs ago still have it can't remember exactly

10-19-2003, 07:19 PM	#6
LT 72 Jimmy Registered User Join Date: Sep 2002 Location: Arkansas Posts: 252	I'd appreciate a pic of a jack in that spring thing. LT

01-10-2004, 03:30 AM	#10
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,511	TTT Did anyone ever find a picture of jack pieces mounted behind seat? Even a picture of the brackets installed without jack handle could help. I couldn't find picture on older threads. __________________ Bob

01-10-2004, 11:49 AM	#11
LT 72 Jimmy Registered User Join Date: Sep 2002 Location: Arkansas Posts: 252	The LMC catalog offers a sticker that has jack storage instructions. I can't tell from the picture if it shows under the bed or behind the seat. I'll order one the next time I need some stuff.

01-10-2004, 01:16 PM	#12
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I dont think the sticker in the LMC catalog is for Blazers. I dont think they even used stickers.

01-10-2004, 07:32 PM	#13
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	In fact they did use a sticker on the blazers. It is located on the back of the drivers side wheelwell, so you can see it when looking at the spare tire. Here is a picture. [img]//img.ranchoweb.com/images/k5hart/jackinstructions2.jpg[/img] As you can see mine is in bad shape, but I think I can still make out the instructions looking at it close up. Give me until tomorrow guys and I will try to put my jack and accessories in according to how the instructions say. I will take pictures for you. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

01-10-2004, 07:46 PM	#14
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	I think my pictures are being difficult today. Try 2...... __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

01-10-2004, 07:53 PM	#15
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Another point to add that everyone may not know. The jack is actually mounted in the back behind the spare. This is the holder for it. The jack handle and the tire iron go behind the back seat. At least this is the best I can tell from the sticker. I will try to get this done tomorrow. Hope this helps. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina



Register or Log In To remove these advertisements.

01-10-2004, 09:12 PM	#16
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	Copy and paste the link for the red x guys. Wow this is like the holy grail. We are finally going to see a jack in place. I have been trying to find this info for months. I even went to the point of emailing people on ebay that were selling Blazers and Jimmys to see if their jacks were in place. Vendors, what are the chances of getting that decal reproduced? I guess the trick would be to find one intact. That is the first time I have ever seen that decal and probably the first time for everyone on this board since nobody knows how to place the jack.

01-10-2004, 09:36 PM	#17
skid Registered User Join Date: Dec 2003 Location: Left Coast Posts: 254	When I purchased my 72 blazer it had the jack, crank, and wrench all mounted behind the drivers seat. It looked like it all belonged there. The people I bought the truck off of never removed or modified anything so I think that was the way my particular truck came from the factory. There was no mounting lug behind the spare tire carrier on mine, and the seat and spare tire carrier were never removed, judging from the looks of the truck. Unfortunately, I have completely gutted the interior so I can't show any pics. __________________ Toys: 72 K5 Blazer 74 Vette

01-11-2004, 12:31 AM	#18
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,267	ditto! mine came from the original owner and the first thing I did 22yrs ago was yank that neatly tuck jack and its parts from behind the drivers seat. what a dumba$$ Have all the parts just not exactly sure how they went

01-11-2004, 01:50 AM	#19
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	UGGGHH! Sorry for the red x's guys. Lets try again. Not to start an argument skid, but my blazer is in the same category. Very original and not much modified. Mine is a CST 2-wheel drive, if that might make a difference. I wouldn't see why, but who knows. Funny how things can be different from truck to truck. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

01-11-2004, 02:34 AM	#20
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 4,002	I wonder if the trucks with exterior carriers would have had the decal.

01-11-2004, 04:21 AM	#21
skid Registered User Join Date: Dec 2003 Location: Left Coast Posts: 254	K5hart, I just looked at the bed of my truck and do have the two holes for the jack mount by the spare tire carrier. Mine must have been taken out at some point in time. __________________ Toys: 72 K5 Blazer 74 Vette

01-11-2004, 04:24 PM	#22
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,369	spring behind drivers seat Attached Images __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

01-11-2004, 07:49 PM	#23
71Blazer Goodbye Darlin' Join Date: Nov 2001 Location: Coupeville, WA USA Posts: 330	So that's what those are for..! MORE MORE MORE __________________ 1971 Blazer CST SOLD!

01-11-2004, 08:12 PM	#24
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Ok everyone are you ready...........heres the jack handle and lug wrench. I installed mine today as best I could from the sticker. It did not seem as difficult as I thought it would be. I am a little questionable on the attachment on towards the middle because this was a part of my sticker that was damaged. I had to guess at it, really it seems like the only way. Everything is held nice a snug, so we'll see if it stays there during normal driving. Take a look and tell me what you think. Next post the jack...... __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

01-11-2004, 08:19 PM	#25
k5hart Registered User Join Date: Nov 2002 Location: Charleston, South Carolina Posts: 1,370	Now the jack........ Mine is attached in the back. After looking really hard at the sticker (poor thing is in bad shape) I noticed that it said trucks with the optional back seat have the jack mounted in the back. Back seat delete trucks mount up front right above the handle location. This answers why some people have the mount in the back and some do not. Cool......mystery solved. This again was super simple, but holds wonderful. Take a look. Give me about an hour and I will have a URL that you can go to see about 16 more pics of the whole install. __________________ 2006 Silverado CCSB, 1939 Ford Sedan, 1962 BelAir Wagon, 1976 Vega Panel Charleston, South Carolina

Register or Log In To remove these advertisements.