K-5 Emblem's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 01-11-2004, 11:28 PM

I just got my K-5 emblem's cleaned up and am debating to put them on or not???? Can you guy/gal's with the emblem's installed post some side shot's of you blazer??? Thank's Luke

BobbyK · 01-12-2004, 12:25 AM

you can see the emblom in this pic.....kinda.:p

**MJN** · 01-12-2004, 01:32 AM

Put on the emblems, they look much better with them on there.

blazerboy72 · 01-12-2004, 08:03 AM

I have one of mine on:

blazerboy72 · 01-12-2004, 08:04 AM

and here is one without:

JimKshortstep4x4 · 01-12-2004, 03:12 PM

I think that they look better on.

Jim

VTKidder · 01-12-2004, 04:07 PM

They were meant to be on the truck; wear them proud.

bouncytruck · 01-12-2004, 04:20 PM

I like it better with them on, plus, you'll get less idiots calling your Blazer a Bronco!

**FRENCHBLUE72** · 01-12-2004, 08:46 PM

Thank's guy's I am gonna put em on and if I don't like em I will leave em off when the new front clip goes on..

72c5 · 01-12-2004, 11:54 PM

BobbyK, some photo documentary! Just shows why everything takes 10X as long as one expects!

Your photography was great too, especially the low light closeups, like the insides of the doors..........what camera did you use?

How about the "Brown Bread"? Would you used it again? think it is better than jute?

Pretty scary looking inner rockers and lower windshield supports for a basically rust free looking truck.

Nice Job, hope you are having fun with it.

Gordon

BobbyK · 01-13-2004, 12:41 AM

Bouncytruck,excellant point!I hate when that happens!

72c5,thanks man.I'm still taking care of some loose ends,wiring,A/C, stuff like that.
The Brown Bread works great,the price was right too.

Ya that rocker and "A" pillar rust is typical of our trucks.GM must have been on a 4:20 break when they designed that area of the truck:p

I have a Nikon CoolPix 850 digital camera.Takes some pretty awesome pic's.

Sorry...now back to your regularly schedualed post.

01-11-2004, 11:28 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	K-5 Emblem's I just got my K-5 emblem's cleaned up and am debating to put them on or not???? Can you guy/gal's with the emblem's installed post some side shot's of you blazer??? Thank's Luke Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-12-2004, 12:25 AM	#2
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	you can see the emblom in this pic.....kinda.:p __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

01-12-2004, 08:03 AM	#4
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	I have one of mine on: Attached Images

01-12-2004, 08:04 AM	#5
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	and here is one without: Attached Images

01-12-2004, 03:12 PM	#6
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I think that they look better on. Jim Attached Images

01-12-2004, 01:32 AM	#3
MJN Registered User Join Date: Feb 2000 Location: Maquoketa, Ia/ Orr, Mn Posts: 2,961	Put on the emblems, they look much better with them on there.

01-12-2004, 04:07 PM	#7
VTKidder Registered User Join Date: May 2003 Location: Vermont Posts: 996	They were meant to be on the truck; wear them proud.

01-12-2004, 04:20 PM	#8
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	I like it better with them on, plus, you'll get less idiots calling your Blazer a Bronco! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-12-2004, 08:46 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Thank's guy's I am gonna put em on and if I don't like em I will leave em off when the new front clip goes on.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-12-2004, 11:54 PM	#10
72c5 Registered User Join Date: Dec 2003 Location: Boston Posts: 311	Wow! BobbyK!! What a job!!!! BobbyK, some photo documentary! Just shows why everything takes 10X as long as one expects! Your photography was great too, especially the low light closeups, like the insides of the doors..........what camera did you use? How about the "Brown Bread"? Would you used it again? think it is better than jute? Pretty scary looking inner rockers and lower windshield supports for a basically rust free looking truck. Nice Job, hope you are having fun with it. Gordon

01-13-2004, 12:41 AM	#11
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	Bouncytruck,excellant point!I hate when that happens! 72c5,thanks man.I'm still taking care of some loose ends,wiring,A/C, stuff like that. The Brown Bread works great,the price was right too. Ya that rocker and "A" pillar rust is typical of our trucks.GM must have been on a 4:20 break when they designed that area of the truck:p I have a Nikon CoolPix 850 digital camera.Takes some pretty awesome pic's. Sorry...now back to your regularly schedualed post. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.