'63 Chevy C10 Factory Anodized Aluminum Grille

[LILRED66]

For Sale factory anodized aluminum grille assembly from a '63 Chevy C10. This grille assembly is in good used condition and complete, including the headlight buckets, mounting brackets, rings and headlight harness. The assembly is located in Kansas City, KS, however, it can be shipped. The complete assembly is $200.00, plus $40.00 packaging & shipping.

I have many other parts from this truck, including the factory stainless steel chrome windshield trim, factory chrome front bumper, factory anodized aluminum Custom Cab sails, factory chrome dash knobs, factory AM radio with chrome dash knobs.

I specialize in '64-'66 Chevy Trucks, so let me know if I can help you any parts for 4-5-6 Chevy Trucks.

Tony Smith
4-5-6 Chevy Trucks
dynamiccontracting@sbcglobal.net
913-207-7789

[Stepside65]

How much for bumper shipped to 88330? thanks.

[jchav62]

Is that a factory automatic steering column?

[javadoc]

I know you didn't list it, but is the bench seat available? I've got nice buckets but want to put a bench back in my '64.

[283 Man]

Tony ,Im looking for two front fenders in good shape 64-66 dont matter just been in good repairable shape.let me know.thanks, 283 man

[LILRED66]

Stepside65:

The factory chrome front bumper is $175.00, including packaging and shipping to 88330.

Let me know if you are interested and we can proceed accordingly. I accept PayPal and money order.

Thanks for your interest.

Tony Smith
4-5-6 Chevy Trucks

[LILRED66]

jchav62:

Thanks for the inquiry. It is not a factory automatic steering column, however, it does have a factory custom deluxe steering wheel and horn ring, in good, used condition. Let me know if you are interested and I can send some photos and price, including packaging & shipping.

Tony Smith
4-5-6 Chevy Trucks

[LILRED66]

javadoc:

Thanks for the inquiry. The factory bench seat is still in the truck, however, it is rather rough. It is complete, but, would need to be reupholstered. I have a few other factory bench seats, that would be better suited for a driver.

Let me know if I can help with a bench seat or other 4-5-6 Chevy Truck parts in the future.

Tony Smith
4-5-6 Chevy Trucks

[LILRED66]

283 Man:

Thanks for the inquiry. I have a few good, used pairs of front fenders with little or no rust or repairs needed. A good used set is $400.00, picked up at my shop in Kansas City, KS. A decent set is $300.00, picked up at my shop in Kansas City, KS. If you need them shipped, it would be $75.00 to package & ship.

Thanks for the inquiry and let me know if I can help you with a set of fenders or other 4-5-6 Chevy Truck parts in the future.

Tony Smith
4-5-6 Chevy Trucks

[283 Man]

Tony,how much is your repairable front fenders with little rust 64-66. Can you get pictures for me?I noticed you said you trade parts to. Got a new radaitor less than 1 year old out of 66 chevy truck bought new for $300.00 would you consider trading your fenders for radaitor. I check back see what you think? thanks 283 man

[LILRED66]

283 fMan:

Good morning and thanks for the inquiry. I am not able to trade a pair of good, used front fenders for a reproduction radiator. I have a number of good, used factory Harrison radiators and good, used OEM front fenders are a little harder to come by. I will send you a PM with price, including packaging & shipping, pictures and description. Thanks for your interest and your trade offer.

Tony Smith
4-5-6 Chevy Trucks

[Tim64]

Hey Tony,
Would you have both parking brake acuator levers from that truck? Also how much for the steering wheel?
Thanks, Tim

[LILRED66]

Tim:

Thanks for the inquiry. I am not sure what you mean by both parking brake actuator levers. Help me out with the description and I am sure they are still on the truck because it is all there and complete.

The steering wheel is an original Custom steering wheel and horn ring, complete. Below is a photo for your consideration. The complete steering wheel and horn ring assembly is $125.00, plus $20.00 packaging & shipping. I will clean it up after removal and prior to shipping.

Thanks for the inquiry and let me know about the brake levers and the steering wheel and I will proceed accordingly.

Tony Smith

[Tim64]

Tony,
The brake parts I need are the levers that fasten near the top of the back shoe, and the parking brake cable fastens at the bottom. In the shop manual they're called parking brake actuator levers.
Thanks,
Tim

[LILRED66]

Tim:

I am sure I have what you need. You may also check with www.lmctruck.com, www.classicparts.com, www.oldchevytrucks.com or your local auto parts supplier. Many of them still carry brake parts for the '60-'66 Chevy trucks.

Tony Smith

[Tim64]

I've checked with everyone you can think of and no one has these parts.
Thanks,
Tim

[Stepside65]

Tony, what do the doors look like? mine have rust in all the usual places and don't have the time to fix it myself. thanks in advance

[LILRED66]

Originally Posted by Tim64

I've checked with everyone you can think of and no one has these parts.
Thanks,
Tim

Tim:

I will be at my shop on Saturday, so I will see what I have.

Tony Smith

[LILRED66]

Originally Posted by Stepside65

Tony, what do the doors look like? mine have rust in all the usual places and don't have the time to fix it myself. thanks in advance

Stepside65:

Good morning. The doors on the '63 Chevy C10 are in pretty rough shape. I will take a closer look at them while I am at my shop on Saturday. There are many good, used parts on this truck, including factory anodized grille assembly, chrome front & rear bumpers, jack assembly, underbed spare tire assembly, Custom cab sails, Custom steering wheel & horn ring, factory AM radio with chrome knobs, chrome dash knobs, stainless steel windshield wrap and factory split-ring wheels.

I will let you know about the condition of the doors and let me know if I can help you with other 4-5-6 Chevy Truck parts in the future.

Tony Smith

[Tim64]

Tony,
How much for a rear axle?
Thanks,
Tim

[LILRED66]

Tim:

Sorry for my delay in responding. Do you still need a rear axle? Let me know because I have a few at the shop.

[thekid54]

Is the grille still available?

[LILRED66]

thekid54:

The grille is still available. Since the photos were taken, I have replaced the missing headlamp and ring. The grille is complete, including the wiring harness, mounting hardware, lamps and rings. The complete grille assembly is $200.00, plus $50.00 packaging & shipping, for a total of $250.00. Pulling the grille will make the truck incomplete, however, I would like to see it go to a nice home also.

Let me know your thoughts and I will proceed accordingly. Thanks for your interest.

[502tripower]

Tony, Are the rear bumper and brackets still available and how much and can you provide a pic? Also what are you asking for the windshield trim and custom cab sails? Thanks Dan

[LILRED66]

Here are a few updated pictures of the factory chrome front bumper, factory anodized aluminum grille and factory chrome rear bumper.