MN Parting 64 C10 Custom - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aerotruk63** · 09-27-2010, 08:13 PM

How about just the posi carrier unit? Shipped to H9H 3L4 Kirkland, Quebec Canada. Axles should be 17 spline.

Wassa · 10-01-2010, 07:24 AM

Hi there Mike
I would love your hood... how much please? i have a container leaving for Aussie in 7 days... time may not be on my side but worth a try.. my email watsign@powerup.com.au
Cheers Warren

Wassa · 10-01-2010, 07:25 AM

Thats a container leaving from LA ... cheers Warren

**tkeduk8r** · 10-03-2010, 11:13 AM

Wassa... I would have no idea how to make that happen.... im sure parts are scarse down under but you would have to detail out how I would have to get the hood to LA and then make sure it got in a container and get to you... prolly be WAYYY expensive too... but i certainly do what I can to help you out and make it happen...
--Mike

Touchdown67 · 10-10-2010, 11:06 PM

How about do you have a nice pair of rear fender wells for a 64-66 C10 LWB? If so shipped to 85251? Thank You.

**tkeduk8r** · 10-10-2010, 11:17 PM

I do, but i have to hang on to them right now... if anything changes ill let you now... thanks,
--Mike

rdlackey · 10-13-2010, 06:06 AM

How about a dash speaker and mounting brackets?

**tkeduk8r** · 10-13-2010, 01:36 PM

Ill look but i dont "think" there is a speaker left inthe dash....
--Mike

**tkeduk8r** · 10-26-2010, 04:54 PM

Last call for a while...we are supposed to get snow and then it will ge difficult to get back there for a while... I belive Ive pm'ed all who ask questions allready, and if I havent I apologize.... Let me know and we can see what we can work out... It doesnt look like ill be sending it off for scrap for a while, so should be good to go... i will be posting the grill seperately on here soon though just cuz it takes up too muckh space inthe basement (wife rule :*(...
--Mike

CenValyCali · 10-27-2010, 10:27 PM

Mike I need a steering wheel sent to 93230. Thanks

**tkeduk8r** · 10-27-2010, 10:58 PM

Cali....PM sent...

tapeworm · 10-28-2010, 02:10 AM

How good is the driver's door? I know the weather here is starting to get crappy, but I would not need it right away. Just thought I'd ask before it gets scrapped.

Almost forgot...

I see you sold the glass & regulator out of the door already, but thats OK. I'll only need just the shell.

And how much for the rear end & back glass?

**tkeduk8r** · 10-29-2010, 11:36 PM

tape....door isnt "too" bad... little bubbling on the bottom but nothing through... another board member has dibs onthe dirvers door latch and lower window slider....and aero has inquired about the rear end... was supposed to be taking the bed off and then it would be easy access... ill le tyu know when i know more, but yeah id like to do any pulling b4 the snow really flies up here for sure..
--Mike

tapeworm · 10-30-2010, 09:01 PM

Sounds good; let me know a $$ and maybe a pic, and we can go from there.

C10Slim · 10-31-2010, 02:02 AM

Whats the passenger inner door panel look like? Shipping to 77479. Thanks!

jbarnes67 · 10-31-2010, 08:03 AM

Im interested in the hood and both front fenders, if they are clean with no rust through. Im currently in Afghanistan, but will be in N. TN. by December.

Thanks again

Jbarnes67

tapeworm · 11-02-2010, 01:16 AM

Quote:

Originally Posted by jbarnes67

Im interested in the hood and both front fenders, if they are clean with no rust through. Im currently in Afghanistan, but will be in N. TN. by December.

Thanks again

Jbarnes67

He said the fenders were rotten on the bottom in a previous post

**tkeduk8r** · 11-02-2010, 05:19 PM

thanks tape... yeah i had allready PM'ed him but forgot to list it on here...sorry boys...
--Mike

chevyguys · 11-03-2010, 01:00 PM

Need the two plates that the tailgate chain pivot bolt screws into shiped to 85203 ???

Touchdown67 · 11-04-2010, 12:56 AM

Looking for a pair of vent window levers in good shape? Shipped to 85251 AZ. Thank You.....

zooza1 · 11-04-2010, 04:38 AM

i could use both headlight buckets with the springs and adjusters if theyre available . they should fit in a post office flat rate box and ship fairly cheap. thanks

**tkeduk8r** · 11-04-2010, 03:17 PM

Chevy.. Ill look tonight.. i think they will work for you ill take a pic or two...PM me your email addy

Touchdown... Only have tha passenger side remaining... sold the driver side...

Zooza... Ive got the grill off and yes I would seperate.... send me your email addy and ill send you a pic or two

Everyone else im heading out to the trux tonight so get some pics...

--Mike

Touchdown67 · 11-04-2010, 04:29 PM

If the handle is in good shape I'll take it. How much shipped to 85251 AZ.? Thank You.

**tkeduk8r** · 11-04-2010, 10:42 PM

td67.. sent PM

**tkeduk8r** · 11-04-2010, 10:49 PM

Pics for C10Slim... PM me with what you want to do....

zooza sent PM....

--Mike

09-27-2010, 08:13 PM	#51
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: Parting 64 C10 Custom How about just the posi carrier unit? Shipped to H9H 3L4 Kirkland, Quebec Canada. Axles should be 17 spline. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 09-27-2010 at 08:40 PM.

10-01-2010, 07:24 AM	#52
Wassa Registered User Join Date: Feb 2010 Location: Brisbane Australia Posts: 4	Re: Parting 64 C10 Custom Hi there Mike I would love your hood... how much please? i have a container leaving for Aussie in 7 days... time may not be on my side but worth a try.. my email watsign@powerup.com.au Cheers Warren

10-01-2010, 07:25 AM	#53
Wassa Registered User Join Date: Feb 2010 Location: Brisbane Australia Posts: 4	Re: Parting 64 C10 Custom Thats a container leaving from LA ... cheers Warren

10-03-2010, 11:13 AM	#54
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Wassa... I would have no idea how to make that happen.... im sure parts are scarse down under but you would have to detail out how I would have to get the hood to LA and then make sure it got in a container and get to you... prolly be WAYYY expensive too... but i certainly do what I can to help you out and make it happen... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-10-2010, 11:06 PM	#55
Touchdown67 Registered User Join Date: Jul 2010 Location: Scottsdale, Arizona Posts: 204	Re: Parting 64 C10 Custom How about do you have a nice pair of rear fender wells for a 64-66 C10 LWB? If so shipped to 85251? Thank You.

10-10-2010, 11:17 PM	#56
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom I do, but i have to hang on to them right now... if anything changes ill let you now... thanks, --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-13-2010, 06:06 AM	#57
rdlackey Registered User Join Date: Oct 2010 Location: North Carolina Posts: 123	Re: Parting 64 C10 Custom How about a dash speaker and mounting brackets?

10-13-2010, 01:36 PM	#58
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Ill look but i dont "think" there is a speaker left inthe dash.... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-26-2010, 04:54 PM	#59
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Last call for a while...we are supposed to get snow and then it will ge difficult to get back there for a while... I belive Ive pm'ed all who ask questions allready, and if I havent I apologize.... Let me know and we can see what we can work out... It doesnt look like ill be sending it off for scrap for a while, so should be good to go... i will be posting the grill seperately on here soon though just cuz it takes up too muckh space inthe basement (wife rule :*(... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-27-2010, 10:27 PM	#60
CenValyCali Registered User Join Date: Mar 2010 Location: Hanford, Ca Posts: 139	Re: Parting 64 C10 Custom Mike I need a steering wheel sent to 93230. Thanks

10-27-2010, 10:58 PM	#61
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Cali....PM sent... __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-28-2010, 02:10 AM	#62
tapeworm fan of "Butters" Stotch Join Date: Dec 2009 Location: St. Paul, MN Posts: 267	Re: Parting 64 C10 Custom How good is the driver's door? I know the weather here is starting to get crappy, but I would not need it right away. Just thought I'd ask before it gets scrapped. Almost forgot... I see you sold the glass & regulator out of the door already, but thats OK. I'll only need just the shell. And how much for the rear end & back glass? __________________ 64 shortbox fleetside replacing rusty junk with more junk, and one day to become a real truck again Last edited by tapeworm; 10-28-2010 at 02:21 AM.

10-29-2010, 11:36 PM	#63
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom tape....door isnt "too" bad... little bubbling on the bottom but nothing through... another board member has dibs onthe dirvers door latch and lower window slider....and aero has inquired about the rear end... was supposed to be taking the bed off and then it would be easy access... ill le tyu know when i know more, but yeah id like to do any pulling b4 the snow really flies up here for sure.. --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

10-30-2010, 09:01 PM	#64
tapeworm fan of "Butters" Stotch Join Date: Dec 2009 Location: St. Paul, MN Posts: 267	Re: Parting 64 C10 Custom Sounds good; let me know a $$ and maybe a pic, and we can go from there. __________________ 64 shortbox fleetside replacing rusty junk with more junk, and one day to become a real truck again

10-31-2010, 02:02 AM	#65
C10Slim Registered User Join Date: Jul 2009 Location: Needville, TX Posts: 283	Re: Parting 64 C10 Custom Whats the passenger inner door panel look like? Shipping to 77479. Thanks!



Register or Log In To remove these advertisements.

10-31-2010, 08:03 AM	#66
jbarnes67 Registered User Join Date: Jun 2008 Location: Clarksville, TN Posts: 17	Re: Parting 64 C10 Custom Im interested in the hood and both front fenders, if they are clean with no rust through. Im currently in Afghanistan, but will be in N. TN. by December. Thanks again Jbarnes67

11-02-2010, 05:19 PM	#68
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom thanks tape... yeah i had allready PM'ed him but forgot to list it on here...sorry boys... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

11-03-2010, 01:00 PM	#69
chevyguys I Got it BAD! Join Date: Jul 2009 Location: MESA, AZ Posts: 205	Re: Parting 64 C10 Custom Need the two plates that the tailgate chain pivot bolt screws into shiped to 85203 ??? __________________ Build Thread: http://www.chevyguys.com

11-04-2010, 12:56 AM	#70
Touchdown67 Registered User Join Date: Jul 2010 Location: Scottsdale, Arizona Posts: 204	Re: Parting 64 C10 Custom Looking for a pair of vent window levers in good shape? Shipped to 85251 AZ. Thank You.....

11-04-2010, 04:38 AM	#71
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Re: Parting 64 C10 Custom i could use both headlight buckets with the springs and adjusters if theyre available . they should fit in a post office flat rate box and ship fairly cheap. thanks

11-04-2010, 03:17 PM	#72
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Chevy.. Ill look tonight.. i think they will work for you ill take a pic or two...PM me your email addy Touchdown... Only have tha passenger side remaining... sold the driver side... Zooza... Ive got the grill off and yes I would seperate.... send me your email addy and ill send you a pic or two Everyone else im heading out to the trux tonight so get some pics... --Mike __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

11-04-2010, 04:29 PM	#73
Touchdown67 Registered User Join Date: Jul 2010 Location: Scottsdale, Arizona Posts: 204	Re: Parting 64 C10 Custom If the handle is in good shape I'll take it. How much shipped to 85251 AZ.? Thank You.

11-04-2010, 10:42 PM	#74
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom td67.. sent PM __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

11-04-2010, 10:49 PM	#75
tkeduk8r Senior Member Join Date: Apr 2001 Location: Alexandria, MN Posts: 1,462	Re: Parting 64 C10 Custom Pics for C10Slim... PM me with what you want to do.... zooza sent PM.... --Mike Attached Images __________________ 63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's

Register or Log In To remove these advertisements.