IN Items to large to ship- Doors, Hoods, Fenders, Frames, Eaton C20 rear end and More

[Todd68Chevy]

I have several large items that I would like to get to a good home but I do not have the time or the abilities to ship them. I will get more pictures and probably add to the list as time and weather allows. All items are for pick up in Shelburn, Indiana. I am not a body man and I describe everything as good as I can but if you want more pictures or have questions then please ask. Post to the thread as per rules.

1. 1967 right hand door complete- looks to be rust free but not dent free -- SOLD Locally

2. 1969 left hand door complete- looks to be rust free but has a few dents and needs repaired at the upper hinge-- Sold Locally

3. 1969 right hand door complete- SOLD

4. 1969-1972 front fenders- will need some repair but I feel real good for this area --starting at $30.00

5. 1967-1970 painted front bumper- SOLD

6. 1971-1972 painted front bumper- SOLD

7. 1969 C10 coil spring LWB rolling chassis- nice condition $500.00

8. 1969 bed 8 foot fleet- steel floor, very solid but rust along the top of the rails, I think it had a camper in it. SOLD Locally

9. #7 chassis & #8 bed together BED SOLD

10. 1972 C10 coil spring LWB rolling chassis- nice condition $600.00

11. 1972 bed 8 foot steel floor fleet- pretty solid but has some dents--- SOLD locally

12. #10 chassis and #11 bed together BED SOLD

13. 1967-1968 Hood- solid but needs front repaired $100.00

14. 1969-1970 Hood- solid but does have surface rust on the bracing under the front of the hood, will work on 71-72 but has hood emblem $60.00

15. 1971-1972 hood- solid, looks very nice underneath - starting to bubble the paint where the metal is seamed in front.--- SOLD Locally

16. 1967 C20 Eaton rear end ho52 4:56 gear open carrier- SOLD locally

and much more!!

For some reason when I try to attach any pictures, the Manage Attachments only gives me 1 space instead of the normal 5 spaces and then will not load what I am trying to post. I will try to post pictures again later but I guess if that does not work then I will need an email address to send the pictures to. So post your interest to thread and then PM me your email to send the pictures to. Thanks

[70STOVEBOLT]

Todd, I would like pics of the 69 driver's door please. PM on the way with email address.

Thanks,
Mark

[Todd68Chevy]

Originally Posted by 70STOVEBOLT

Todd, I would like pics of the 69 driver's door please. PM on the way with email address.

Thanks,
Mark

Mark, I have sent you more pictures. Thanks

Because of the picture issue, I have had BAT contact me about a 69-72 hood- pictures sent and JDAGHY contact me about the 72 bed-- pictures sent. Thanks

[70STOVEBOLT]

Todd, thanks for the pics, I am going to pass on the driver's door.

[Todd68Chevy]

Originally Posted by 70STOVEBOLT

Todd, thanks for the pics, I am going to pass on the driver's door.

I do not think it will matter but I just read my ad and realized that I marked the 1969 doors incorrectly. Here is how it supposed to read:

2. 1969 left hand door complete- looks to be rust free but has a few dents and needs repaired at the upper hinge $150.00

3. 1969 right hand door complete- looks to be rust free $250.00

Sorry about the confusion.

[70STOVEBOLT]

After you said the hinge area needed repair I wondered if it wasn't backwards.

[nasqar]

I am interested in the doors and tailgate.

[Todd68Chevy]

Originally Posted by 70STOVEBOLT

After you said the hinge area needed repair I wondered if it wasn't backwards.

I guess I need to read what I type.

Originally Posted by nasqar

I am interested in the doors and tailgate.

Nice meeting you tonight. Hope you make good use of your new treasures. Thanks.

[derekbantz]

Todd, could I have some pics of both of the beds for sale. Sending PM with my email address. Thanks!

[Todd68Chevy]

Originally Posted by derekbantz

Todd, could I have some pics of both of the beds for sale. Sending PM with my email address. Thanks!

Pictures were sent. If you want more just let me know. Thanks

[Cash3481]

Todd,
I had the same issue loading pictures last night.
When you load the first one it allows another load option and shows the link like before down below. I loaded 5 at a time still, hope that helps you out!
Mike

[Todd68Chevy]

TTT I still have a lot of good parts available and I am bringing a 1971 C10 and a 1972 C10 home this weekend.

Originally Posted by Cash3481

Todd,
I had the same issue loading pictures last night.
When you load the first one it allows another load option and shows the link like before down below. I loaded 5 at a time still, hope that helps you out!
Mike

Sorry I never got back to you on this but everytime it states the pictures are to big and will not accept them. I have got a couple pictures to load in another thread by cropping the picture but I do not know how to down size one. Hopefully they will get the server issue lined out soon. I love pictures

[Todd68Chevy]

Here are pictures for Ultrahd4me and my90k5

[starfire58]

Todd- I'm still looking for a nice drivers side 8 ft fleetside box side. I talked to you at Peotone. Any leads?

[ultrahd4me]

Todd,
Thanks for the pics, but I was able to source them local.

[Todd68Chevy]

Originally Posted by starfire58

Todd- I'm still looking for a nice drivers side 8 ft fleetside box side. I talked to you at Peotone. Any leads?

PM sent.

Originally Posted by ultrahd4me

Todd,
Thanks for the pics, but I was able to source them local.

No problem, Thanks

[nasqar]

Is there such a thing as a used cowl induction hood for a 71 c10? I haven't seen one listed anywhere and what would one of these things sell for?

[Todd68Chevy]

Originally Posted by nasqar

Is there such a thing as a used cowl induction hood for a 71 c10? I haven't seen one listed anywhere and what would one of these things sell for?

I am sure there is and I think I have seen them on here before but the shipping would be high. I think a new one is around $400.00 plus shipping. Have you checked with GMC Paul out of Rockville, IN. He might be able to get you a deal on a new one. He is a member here on the board.

I am going in the morning to get the 71 and 72 that I looked at on the way north last Friday. By the way, after getting stopped on I65 in road construction traffic, we finally made it to my buddy's house in MI at 1:15am. It was a very long day.

[CarlC71]

Was those the one in Clinton county?

[Todd68Chevy]

Originally Posted by CarlC71

Was those the one in Clinton county?

If you mean the 71 & 72 Chevys trucks that I am buying, they are close to Clinton, IN the town but that is Vermillion county. They are north of Terre Haute, IN. I am not sure where Clinton County is.

[nasqar]

Originally Posted by Todd68Chevy

I am sure there is and I think I have seen them on here before but the shipping would be high. I think a new one is around $400.00 plus shipping. Have you checked with GMC Paul out of Rockville, IN. He might be able to get you a deal on a new one. He is a member here on the board.

I am going in the morning to get the 71 and 72 that I looked at on the way north last Friday. By the way, after getting stopped on I65 in road construction traffic, we finally made it to my buddy's house in MI at 1:15am. It was a very long day.

what is gmc pauls name on the board? I have heard good things about him.

How much were you able to get done on your truck?

[Todd68Chevy]

Originally Posted by nasqar

what is gmc pauls name on the board? I have heard good things about him.

How much were you able to get done on your truck?

It is just GMCPAUL. He is on the Vendor list also.

I have not been able to find the thread with the bumper picture in it yet. If you can send me a link, Please do. I would like to see it.

We had a good 2 days of work on it but that still does not seem like much when it is all said and done. The bed was disassembled and the new bed sides installed, braces made and welded. The roof and door jamb got worked on and the drivers doors were cut and started back together to fill the hole. I will post in the thread when I have time but it has been a busy few weeks.

[nasqar]

How much do you sell a complete bed for? Also how much for a rolling chassis? No motor, just differential and front suspension. I am thinking about building a truck from the ground up and need another long wheel base chassis to start from.

[nasqar]

I forgot to ask about a tailgate?

[Todd68Chevy]

Originally Posted by nasqar

How much do you sell a complete bed for? Also how much for a rolling chassis? No motor, just differential and front suspension. I am thinking about building a truck from the ground up and need another long wheel base chassis to start from.

Originally Posted by Todd68Chevy

7. 1969 C10 coil spring LWB rolling chassis- nice condition $500.00

8. 1969 bed 8 foot fleet- steel floor, very solid but rust along the top of the rails, I think it had a camper in it. $500.00

9. #7 chassis & #8 bed together $800.00

10. 1972 C10 coil spring LWB rolling chassis- nice condition (has a very rusted a/c cab on it right now) $600.00

11. 1972 bed 8 foot steel floor fleet- pretty solid but has some dents $400.00

12. #10 chassis and #11 bed together $800.00

These are the best 2 beds that I have right now. I have other disc brake chassis. The chassis prices depend on how much you want with it. I do also have a 1/2 ton leaf spring, disc brake chassis if you want leafs instead of coil rear suspension. You can give me a call and we can go from there if you want.

Originally Posted by nasqar

I forgot to ask about a tailgate?

The only tailgates I have are the ones that I had when you was down picking up parts. I do not have any good ones but I might have a usable one that I can include with a bed. Thanks