CA 1966 Part Out - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

budnikguy · 11-05-2013, 11:50 AM

Let me take a look and calculate price and shipping..

Quote:

Originally Posted by 66Submarine

Interested in the emblems, parking brake assembly, 292 engine mounts, and possibly the rear brake drums. (Shipping's going to be brutal on those big, heavy drums, so I'm hoping to find some a little closer if I can; I'll let you know if I don't.) Give me a price shipped to 30157. (Minus the drums for now)

budnikguy · 11-09-2013, 01:11 PM

pics for you...not very good..$15.00

Quote:

Originally Posted by ChiefRocka

I asked a while back ..... pass fender ?

budnikguy · 11-09-2013, 01:20 PM

Pulled the cover, spun the rearend and it was about 2 1/2 times around...so 4.88 and 5.11's?!

Quote:

Originally Posted by obijuan

Get a chance to check out the rearend ratio?

budnikguy · 11-09-2013, 01:22 PM

Drivers side fender is bad....FREE for the pick up locals...

obijuan · 11-09-2013, 02:36 PM

Thanks for the great pics. It has the no spin decal however its not there anymore. Really wanted that lol.
In one picture the teeth look a little scarred, is this true or just an effect of the camera?
Are you willing to pull the pinion support and ring gear and send em to 78233? Thats large flat rate territory easily. Thanks for checking that. For confirmation, there are two numbers stamped on the backside of the ring gear that say 7-36? If so I am interested.

**1971 GMC SHORTY** · 11-10-2013, 02:12 AM

Quote:

Originally Posted by budnikguy

A/C parts are removed and ready to go...

Thanks Adam Another Great Deal With You Very Interested In those papers Thanks Again... Great Seller

ksmith59 · 11-10-2013, 12:23 PM

Hi there

How much for the complete 292 Engine from breather to oil pan from fly wheel to fan?

Thanks

budnikguy · 11-10-2013, 12:48 PM

Pm'd you....

budnikguy · 11-10-2013, 01:12 PM

video....

66Submarine · 11-10-2013, 03:11 PM

Hey, you forgot about me, lol.

rawraw67 · 11-11-2013, 07:05 PM

do you have the metal piece that screws to the top of the core support? it is between the core support and the radiator. you can see it on your frist post in pictures 4 and 5

budnikguy · 11-12-2013, 02:17 PM

Yeah let me get it pulled..teeth look clean, just the combo of camera, diminishing sunlight, and gear oil...What is a fair price?! I will get it pulled this weekend!

Adam

Quote:

Originally Posted by obijuan

Thanks for the great pics. It has the no spin decal however its not there anymore. Really wanted that lol.
In one picture the teeth look a little scarred, is this true or just an effect of the camera?
Are you willing to pull the pinion support and ring gear and send em to 78233? Thats large flat rate territory easily. Thanks for checking that. For confirmation, there are two numbers stamped on the backside of the ring gear that say 7-36? If so I am interested.

budnikguy · 11-12-2013, 02:18 PM

PM me your address... and thank you Danny.

Adam

Quote:

Originally Posted by 1971 GMC SHORTY

Thanks Adam Another Great Deal With You Very Interested In those papers Thanks Again... Great Seller

budnikguy · 11-12-2013, 02:20 PM

Sure do, let me pull it out and get you a couple of pics to confirm condition...

Adam

Quote:

Originally Posted by rawraw67

do you have the metal piece that screws to the top of the core support? it is between the core support and the radiator. you can see it on your frist post in pictures 4 and 5

budnikguy · 11-12-2013, 02:23 PM

Got emblems removed, have not pulled motor/trans yet..so got to wait on me for the mounts and the parking brake stuff...hang in there...have not forgotten!

Adam

Quote:

Originally Posted by 66Submarine

Interested in the emblems, parking brake assembly, 292 engine mounts, and possibly the rear brake drums. (Shipping's going to be brutal on those big, heavy drums, so I'm hoping to find some a little closer if I can; I'll let you know if I don't.) Give me a price shipped to 30157. (Minus the drums for now)

stormking · 11-13-2013, 07:26 PM

Hey Adam, Got the brake booster today. Excellent packing job, really nice parts. Thank you

**yelmer** · 11-13-2013, 08:12 PM

checking on decal thanks

budnikguy · 11-13-2013, 08:15 PM

Great glad it got there ok....ty

Adam

Quote:

Originally Posted by stormking

Hey Adam, Got the brake booster today. Excellent packing job, really nice parts. Thank you

rawraw67 · 11-14-2013, 10:21 PM

any luck with the metal trim part

budnikguy · 11-14-2013, 10:25 PM

I will be off work on Saturday...and get it out for you then!

Quote:

Originally Posted by rawraw67

any luck with the metal trim part

**yelmer** · 11-16-2013, 04:20 PM

Is ac still for sale

rawraw67 · 11-16-2013, 11:40 PM

still have the booster?

budnikguy · 11-17-2013, 11:18 AM

AC is sold...other than the AC dash...

[/B]

Quote:

Originally Posted by yelmer

Is ac still for sale

budnikguy · 11-17-2013, 11:21 AM

Booster is sold..

Quote:

Originally Posted by rawraw67

still have the booster?

budnikguy · 11-17-2013, 11:22 AM

Complete motor and trans is SOLD.

11-09-2013, 01:22 PM	#104
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1966 Part Out Drivers side fender is bad....FREE for the pick up locals...

11-09-2013, 02:36 PM	#105
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 1966 Part Out Thanks for the great pics. It has the no spin decal however its not there anymore. Really wanted that lol. In one picture the teeth look a little scarred, is this true or just an effect of the camera? Are you willing to pull the pinion support and ring gear and send em to 78233? Thats large flat rate territory easily. Thanks for checking that. For confirmation, there are two numbers stamped on the backside of the ring gear that say 7-36? If so I am interested.

11-10-2013, 12:23 PM	#107
ksmith59 Registered User Join Date: Oct 2010 Location: Richland, MS Posts: 11	Re: 1966 Part Out Hi there How much for the complete 292 Engine from breather to oil pan from fly wheel to fan? Thanks

11-10-2013, 12:48 PM	#108
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1966 Part Out Pm'd you....

11-10-2013, 01:12 PM	#109
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1966 Part Out video....

11-10-2013, 03:11 PM	#110
66Submarine Registered User Join Date: Sep 2012 Location: Dallas, GA Posts: 1,497	Re: 1966 Part Out Hey, you forgot about me, lol. __________________ 1965 C30 pickup 350/SM420/4.10's (daily driver) thread 1968 Impala 4 door sedan (future driver project) thread

11-11-2013, 07:05 PM	#111
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1966 Part Out do you have the metal piece that screws to the top of the core support? it is between the core support and the radiator. you can see it on your frist post in pictures 4 and 5

11-13-2013, 07:26 PM	#116
stormking Registered User Join Date: Apr 2013 Location: Portland's Back Door Posts: 64	Re: 1966 Part Out Hey Adam, Got the brake booster today. Excellent packing job, really nice parts. Thank you

11-13-2013, 08:12 PM	#117
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 1966 Part Out checking on decal thanks

11-14-2013, 10:21 PM	#119
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1966 Part Out any luck with the metal trim part

11-16-2013, 04:20 PM	#121
yelmer Registered User Join Date: Aug 2008 Location: greeley colorado Posts: 1,360	Re: 1966 Part Out Is ac still for sale

11-16-2013, 11:40 PM	#122
rawraw67 Registered User Join Date: Dec 2007 Location: Bay the Bay Posts: 483	Re: 1966 Part Out still have the booster?

11-17-2013, 11:22 AM	#125
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: 1966 Part Out Complete motor and trans is SOLD.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.