ID Basement cleanout #3 - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1963c-10 · 03-05-2014, 10:22 AM

I'll take the other set of visors too.

Bregion · 03-05-2014, 10:22 AM

Is that window rubber for the back window?

1963c-10 · 03-05-2014, 12:59 PM

Also need the driver side bracket that hold the bolt that goes in the top hole on this panel. I have the pass side bracket, but need the driver side. 63 fleetside

BLK65K10 · 03-05-2014, 10:52 PM

Jon, I will add those parts to your pile.

Bregion- Yes that is a small back window rubber that is on good usable condition, no cracks in the rubber and is still soft and pliable.

63truckgirl · 03-05-2014, 10:58 PM

I would like to get a few park light bezels from you

**1971 GMC SHORTY** · 03-06-2014, 12:13 AM

4 Buy Shifter shipped To 91340

**steveb64** · 03-06-2014, 02:37 PM

You wouldn't happen to have the bracket that ties the dash speaker to the radio? Looks like you have darn near everything.

BLK65K10 · 03-06-2014, 11:17 PM

63truckgirl- How many and what is you zipcode?

1971 GMC Shorty- I will get that boxed up and get a shipping price.

steveb64- I don't have any speaker stuff left.

Thanks Lyle

63truckgirl · 03-06-2014, 11:45 PM

I would like 2 and zip is 77833 send pm with total and how I pay

**1971 GMC SHORTY** · 03-06-2014, 11:51 PM

Quote:

Originally Posted by BLK65K10

63truckgirl- How many and what is you zipcode?

1971 GMC Shorty- I will get that boxed up and get a shipping price.

steveb64- I don't have any speaker stuff left.

Thanks Lyle

Kool

BLK65K10 · 03-07-2014, 01:54 AM

chevyfreak60 here is a photo of the other heater top I found.
Name: 100_3838.jpg
Views: 282
Size: 40.7 KB

**pimpston65** · 03-07-2014, 02:04 AM

any chance you have all the little hex head screws for the heater box. the ones for the lid and the ones the attach the blower motor and the ones that attach the middle section to the main body and to the firewall. so basically all of them?

65 C20 · 03-07-2014, 01:42 PM

Hi Lyle.
In post #2 I think I see a light and 2 speed wiper switch with washer.
Would you have those in the chrome and black style, possibly for deluxe interior ?
Also for the back-up lights I ordrered I am thinking that I will need the switch that I am guessing goes on the tranny by the shifter.
I have the original Granny 4 speed.
If that is something better to wait till the snow clears I can wait for that.
Thanks Cal.

P.S. Did you see the post on the deluxe heater delector.
Shouldn't be to hard to bend up one of those.

shortbed70 · 03-07-2014, 04:42 PM

64-66 heater control pic #1 in post 7 Price shipped to 66535 please?

BLK65K10 · 03-07-2014, 11:30 PM

pimpston65- I have a whole coffee can full of screws I will add some to your box of parts.

65 C20- I haven't gone through my custom cab knobs as that is something I am using on my truck and don't want to sell myself short but there may be some available in the future. I sold all my 4 spd backup light switch parts to Tony at 4-5-6chevytrucks a few years ago. Thanks for update on the heater piece Ive been so busy with these parts orders I haven't checked out the other stuff.

shortbed70- I have several of those. The one shown is gmc. Do you want chevy or gmc? I will PM with shipping.

BLK65K10 · 03-07-2014, 11:34 PM

Payments were received today from- too much stuff, davbowen, slaminum69, 78f1hundo, and whippingsaw. Thank you. Your parts will ship out Monday. I will PM with tracking numbers.
Thanks Lyle

**pimpston65** · 03-08-2014, 12:06 AM

coffee can full eh, i use those medal coffee cans for hillbilly horseshoes. love that "clang". anyway thks on the screws saved me grinding new self tapers to get the same hex head style. got and phillips head screws that mount the rear stepside fender ima use the screws for the top of the bed to mount the side carrier. just need two cuz my hex head ones arent correct

BLK65K10 · 03-08-2014, 12:38 AM

pimpston65- If you look at post #4 photo #5 there is a blue bracket that is a support bracket for stepside with spare tire hanger and there is a bag of hardware that goes with it. I will look and see if there are any screws in there. that is about all the stepside stuff I have so I don't know if I have any other screws. I will look and see.

**pimpston65** · 03-08-2014, 12:52 AM

that support pieces is still mounted to my bed so mine is good, the screws are the same just for the tires carrier, if it take getin the bracket for the screw i will pick it up

BLK65K10 · 03-08-2014, 12:52 AM

1963 c-10- Jon here is a photo of the turn signal housings you requested. $5 ea. I will get that tailgate chain bracket pulled tomorrow and let you know a total for shipping. Thanks Lyle
Name: 100_3839.jpg
Views: 345
Size: 47.6 KB

Name: 100_3839.jpg
Views: 345
Size: 47.6 KB

Name: 100_3840.jpg
Views: 344
Size: 48.2 KB

BLK65K10 · 03-08-2014, 12:59 AM

Quote:

Originally Posted by pimpston65

that support pieces is still mounted to my bed so mine is good, the screws are the same just for the tires carrier, if it take getin the bracket for the screw i will pick it up

I went and looked and the screws in the bag with it are the head board hex bolts. I will look in some other stuff tomorrow and see about a couple screws.

**pimpston65** · 03-08-2014, 01:04 AM

nice thks for letting us peek into ur stash.

**pimpston65** · 03-08-2014, 01:25 AM

ok one last item, maybe post #4 pic #5 i need the wiper sprayer knob with the hole in the center.

BLK65K10 · 03-08-2014, 01:52 AM

OK I will throw one in.

1963c-10 · 03-10-2014, 12:54 PM

Quote:

Originally Posted by BLK65K10

1963 c-10- Jon here is a photo of the turn signal housings you requested. $5 ea. I will get that tailgate chain bracket pulled tomorrow and let you know a total for shipping. Thanks Lyle
Attachment 1224608

Attachment 1224609

Those will work great...thanks

03-05-2014, 10:22 AM	#51
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Basement cleanout #3 I'll take the other set of visors too. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

03-05-2014, 10:22 AM	#52
Bregion Registered User Join Date: Jun 2013 Location: Elk city ,ok Posts: 65	Re: Basement cleanout #3 Is that window rubber for the back window? Last edited by Bregion; 03-05-2014 at 10:28 AM.

03-05-2014, 12:59 PM	#53
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Basement cleanout #3 Also need the driver side bracket that hold the bolt that goes in the top hole on this panel. I have the pass side bracket, but need the driver side. 63 fleetside Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

03-05-2014, 10:52 PM	#54
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 Jon, I will add those parts to your pile. Bregion- Yes that is a small back window rubber that is on good usable condition, no cracks in the rubber and is still soft and pliable.

03-05-2014, 10:58 PM	#55
63truckgirl Registered User Join Date: Feb 2014 Location: Brenham tx Posts: 9	Re: Basement cleanout #3 I would like to get a few park light bezels from you

03-06-2014, 12:13 AM	#56
1971 GMC SHORTY Senior Member Join Date: Apr 2009 Location: SAN FERNANDO VALLE SOL CAL Posts: 1,064	Re: Basement cleanout #3 4 Buy Shifter shipped To 91340 __________________ 1966 GMC K25 V6 351E Original Utility Truck 2000 C3500 Hot Rod Utility Truck 2003 ROAD KING 100th 124ci 6 Speed 145CI M/P Pro Street FXR 2002 FXDP 2007 2500HD DURAMAX. DD Studio Teamsters / Mechanic Retired GM Master Tech 20 Years Retired Ford Tech 15 Years

03-06-2014, 02:37 PM	#57
steveb64 Active Member Join Date: Oct 2009 Location: Moline, IL Posts: 157	Re: Basement cleanout #3 You wouldn't happen to have the bracket that ties the dash speaker to the radio? Looks like you have darn near everything.

03-06-2014, 11:17 PM	#58
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 63truckgirl- How many and what is you zipcode? 1971 GMC Shorty- I will get that boxed up and get a shipping price. steveb64- I don't have any speaker stuff left. Thanks Lyle

03-06-2014, 11:45 PM	#59
63truckgirl Registered User Join Date: Feb 2014 Location: Brenham tx Posts: 9	Re: Basement cleanout #3 I would like 2 and zip is 77833 send pm with total and how I pay

03-07-2014, 01:54 AM	#61
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 chevyfreak60 here is a photo of the other heater top I found.

03-07-2014, 02:04 AM	#62
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: Basement cleanout #3 any chance you have all the little hex head screws for the heater box. the ones for the lid and the ones the attach the blower motor and the ones that attach the middle section to the main body and to the firewall. so basically all of them?

03-07-2014, 01:42 PM	#63
65 C20 Registered User Join Date: Nov 2013 Location: Comox BC Posts: 337	Re: Basement cleanout #3 Hi Lyle. In post #2 I think I see a light and 2 speed wiper switch with washer. Would you have those in the chrome and black style, possibly for deluxe interior ? Also for the back-up lights I ordrered I am thinking that I will need the switch that I am guessing goes on the tranny by the shifter. I have the original Granny 4 speed. If that is something better to wait till the snow clears I can wait for that. Thanks Cal. P.S. Did you see the post on the deluxe heater delector. Shouldn't be to hard to bend up one of those.

03-07-2014, 04:42 PM	#64
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Basement cleanout #3 64-66 heater control pic #1 in post 7 Price shipped to 66535 please? __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-07-2014, 11:30 PM	#65
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 pimpston65- I have a whole coffee can full of screws I will add some to your box of parts. 65 C20- I haven't gone through my custom cab knobs as that is something I am using on my truck and don't want to sell myself short but there may be some available in the future. I sold all my 4 spd backup light switch parts to Tony at 4-5-6chevytrucks a few years ago. Thanks for update on the heater piece Ive been so busy with these parts orders I haven't checked out the other stuff. shortbed70- I have several of those. The one shown is gmc. Do you want chevy or gmc? I will PM with shipping. Last edited by BLK65K10; 03-08-2014 at 01:07 AM.

03-07-2014, 11:34 PM	#66
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 Payments were received today from- too much stuff, davbowen, slaminum69, 78f1hundo, and whippingsaw. Thank you. Your parts will ship out Monday. I will PM with tracking numbers. Thanks Lyle



Register or Log In To remove these advertisements.

03-08-2014, 12:06 AM	#67
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: Basement cleanout #3 coffee can full eh, i use those medal coffee cans for hillbilly horseshoes. love that "clang". anyway thks on the screws saved me grinding new self tapers to get the same hex head style. got and phillips head screws that mount the rear stepside fender ima use the screws for the top of the bed to mount the side carrier. just need two cuz my hex head ones arent correct

03-08-2014, 12:38 AM	#68
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 pimpston65- If you look at post #4 photo #5 there is a blue bracket that is a support bracket for stepside with spare tire hanger and there is a bag of hardware that goes with it. I will look and see if there are any screws in there. that is about all the stepside stuff I have so I don't know if I have any other screws. I will look and see.

03-08-2014, 12:52 AM	#69
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: Basement cleanout #3 that support pieces is still mounted to my bed so mine is good, the screws are the same just for the tires carrier, if it take getin the bracket for the screw i will pick it up

03-08-2014, 12:52 AM	#70
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 1963 c-10- Jon here is a photo of the turn signal housings you requested. $5 ea. I will get that tailgate chain bracket pulled tomorrow and let you know a total for shipping. Thanks Lyle

03-08-2014, 01:04 AM	#72
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: Basement cleanout #3 nice thks for letting us peek into ur stash.

03-08-2014, 01:25 AM	#73
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,185	Re: Basement cleanout #3 ok one last item, maybe post #4 pic #5 i need the wiper sprayer knob with the hole in the center.

03-08-2014, 01:52 AM	#74
BLK65K10 Registered User Join Date: Mar 2012 Location: Bonners Ferry Idaho Posts: 1,024	Re: Basement cleanout #3 OK I will throw one in.

Register or Log In To remove these advertisements.