The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-01-2015, 05:05 PM   #1
beardo73
Registered User
 
beardo73's Avatar
 
Join Date: Dec 2014
Location: Slippery Rock, PA
Posts: 25
Cross sills questions

So I am about to replace the floor in the 1972 K5 Blazer. When I was looking down there, the cross sills are either rusted so bad they disappeared-- or the previous owner did not put them back on when he attempted his resto...

I'm not having much luck finding anything Blazer/Jimmy specific on reproduction parts.. So I guess my question is are there any made for SWB trucks that would work? How many cross sills do I need under there? Any personal experiences with this issue? I'll even take dimensions of anyone has them! Worst comes to worst I'll end up going to the fab shop and have them help me out...

Thanks for any and all help!
__________________
1972 K5 Blazer in progress!
beardo73 is offline   Reply With Quote
Old 03-01-2015, 06:46 PM   #2
Musclerodz
Senior Member
 
Join Date: Aug 2005
Location: OKC, OK
Posts: 2,365
Re: Cross sills questions

I know the rear wheelhouse cross sill is 2" shorter, but you could make it work by just notching the cross sill from the body mounts in. The intermediate cross sill between the tubs is the same. I know about those as I just changed them. I would have to compare the others to be sure on those.
__________________
Mike Redpath
Musclerodz is offline   Reply With Quote
Old 03-01-2015, 07:49 PM   #3
69-72
Registered User
 
69-72's Avatar
 
Join Date: May 2008
Location: 204
Posts: 903
Re: Cross sills questions

This might help
__________________
1969 Chevy Custom Camper 3/4 ton Rust free survivor

1972 Chevy Blazer CST 4x4 Almost Rust free survivor

1972 GMC Jimmy 2wd Undergoing surgery
69-72 is offline   Reply With Quote
Old 03-01-2015, 08:01 PM   #4
grillzy
Registered User
 
Join Date: Jan 2014
Location: belleville ontario
Posts: 354
Re: Cross sills questions

That is one great picture!
grillzy is offline   Reply With Quote
Old 03-02-2015, 11:33 AM   #5
beardo73
Registered User
 
beardo73's Avatar
 
Join Date: Dec 2014
Location: Slippery Rock, PA
Posts: 25
Re: Cross sills questions

That is a fantastic picture! Thank you for posting that!

Wouldn't happen to have any dimensions off of that would ya?

Thanks again!
__________________
1972 K5 Blazer in progress!
beardo73 is offline   Reply With Quote
Old 03-02-2015, 10:47 PM   #6
69-72
Registered User
 
69-72's Avatar
 
Join Date: May 2008
Location: 204
Posts: 903
Re: Cross sills questions

The two sills on either side of the wheel well are like this. The flanges not are ~1" on one side and ~1/2" on the other. The short cross sill in the middle is the same size but the flanges are equal ~1/2" each side.

These sills are the same as on a pickup. Probably would be easiest and best to get some bent up, I have had that done before.

If you can find a decent steel bed floor from a pickup you can use that as a replacement. Thats what I did, took a long bed floor and sectioned the back half and welded the Blazer specific front on it. You can use the crossmembers too, don't even need to take them off.
Attached Images
 
__________________
1969 Chevy Custom Camper 3/4 ton Rust free survivor

1972 Chevy Blazer CST 4x4 Almost Rust free survivor

1972 GMC Jimmy 2wd Undergoing surgery

Last edited by 69-72; 03-02-2015 at 11:00 PM.
69-72 is offline   Reply With Quote
Old 03-02-2015, 10:56 PM   #7
69-72
Registered User
 
69-72's Avatar
 
Join Date: May 2008
Location: 204
Posts: 903
Re: Cross sills questions

Bonus pics


__________________
1969 Chevy Custom Camper 3/4 ton Rust free survivor

1972 Chevy Blazer CST 4x4 Almost Rust free survivor

1972 GMC Jimmy 2wd Undergoing surgery
69-72 is offline   Reply With Quote
Old 03-03-2015, 09:45 AM   #8
beardo73
Registered User
 
beardo73's Avatar
 
Join Date: Dec 2014
Location: Slippery Rock, PA
Posts: 25
Re: Cross sills questions

That is great! Thanks for the pics and info.

I didn't even think about trying to swap in a decent long bed. That might be the easiest way to go.. Time to poke around and see what I can find!

Thank you again for all the help!
__________________
1972 K5 Blazer in progress!
beardo73 is offline   Reply With Quote
Old 03-03-2015, 09:59 AM   #9
69-72
Registered User
 
69-72's Avatar
 
Join Date: May 2008
Location: 204
Posts: 903
Re: Cross sills questions

If you find a short bed floor you wouldn't need to do the rear section.
__________________
1969 Chevy Custom Camper 3/4 ton Rust free survivor

1972 Chevy Blazer CST 4x4 Almost Rust free survivor

1972 GMC Jimmy 2wd Undergoing surgery
69-72 is offline   Reply With Quote
Reply

Bookmarks

Tags
bed floor repair, blazer, cross sills, jimmy

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com