What did you do on your truck today? - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bouncytruck · 10-14-2002, 04:04 PM

Pulled the starter and then drove all around looking for someone who had a clue to order a new one. I guess I'll keep looking tomorrow

Jmac05 · 10-14-2002, 04:04 PM

Disc brakes with gas slotted & Cross-drilled rotors, power booster kit, power steering w/ stainless steel lines. All from Classic Performance.

billogna · 10-14-2002, 08:52 PM

Wish I had Jmac05's goodies, but I only installed a trailer harness and a hinge at the top of my license plate, so I don't have to take off the plate to tow. I installed the hidden hitch a year ago, and am just now doing this.

mikep · 10-14-2002, 09:01 PM

I finally broke down and admitted that there is no way I can find the correct shifter boot for my truck so I went down to the junkyard and picked up a shifter boot retainer, sandblasted it and painted it. Then I installed it with the new incorrect shifter boot I got from GMCpaul.

BTW if anyone needs a shift boot retainer for a 67-68 hi hump big block with the Close ratio 4 speed NP 435 M28 option let me know. I won't be using mine again. Its the only one I have ever seen.

weasel29gm · 10-14-2002, 10:50 PM

Been workin' 2-4 hrs everyday gettin' all trim holes filled and all the odds and ends gettin' ready to paint hopefully sometime in Nov.

LS1 K-5 Blazer · 10-14-2002, 10:53 PM

Started the body work on my big blazer. Put a new 1405 and performer intake on it and some chrome stuff (air cleaner, valve covers) Anyone here know how to tune the 1405 and intake. As far as air and fuel and timming?
I also put a new distributor in my little blazer. Runs like a champ now 210,000 miles and the valve covers or anything else for that matter have not been off.

palallin · 10-14-2002, 11:48 PM

I did it! Oil changed, chassis lubed.

jmil1974 · 10-15-2002, 12:02 AM

After finally getting brake lines and prop valve hooked up right(?) and bleeding yesterday -- I took off my spindles tonight to send back to gmcpaul. I got drop spindles instead of stock height like I ordered so he's sending me stock ones on his nickel. In case any of had doubts about Paul, one word . . . don't. He's top notch in every way. I highly recommend him for anything he carries. He has in me a customer for life.

Put in my new glovebox too.

diggin69 · 10-15-2002, 09:34 AM

After posting yesterday I went to the house, & took the tailgate off, trim, rods out, handle off, & the hinges, everthing will be getting striped down. I thought I would need a new tailgate but turns out this one can be saved, very straight, no dents, & with little dings on the inside, it feels good saving $380 for a new tailgate, hard telling what I will do tonight!

**Yukon Jack** · 10-15-2002, 09:42 AM

Separated the 2wd 4 speed manual tranny from the 454 and started to replace inner fender wells on my wife's car. It's an import and of all things they use plastic screws and retainers - that's pretty lame! I'll stick with my truck!

kpf · 10-15-2002, 09:56 AM

got a few things done..

wired in some under dash courtesy lights, nice and bright when you get in at night,

also put new dist. cap, rotor, module, plug wires.
Accellerator pump

Also got a slow leak in one of the tires fixed, while I was waiting for that the tire shop had a 68 rs/ss camaro for sale on their show room floor, real nice but wanted $55000 for it. I just had to laugh out loud.

10-14-2002, 04:04 PM	#51
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Pulled the starter and then drove all around looking for someone who had a clue to order a new one. I guess I'll keep looking tomorrow __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-14-2002, 04:04 PM	#52
Jmac05 L.E.D. Tail lights, Baby! Join Date: Jan 2002 Location: Corona, Ca Posts: 290	Disc brakes with gas slotted & Cross-drilled rotors, power booster kit, power steering w/ stainless steel lines. All from Classic Performance. __________________ *Prov 3:5-8* "Hook 'em" L.E.D. Taillights for sale NOW!!! If interested, visit: www.earlyclassic.com or our website: www.jmcled.com All 67-72 GM Taillights are on sale untill 5 p.m. on Dec 15th, with Guaranteed Christmas delivery! joel.mcwaters@jmcled.com

10-14-2002, 08:52 PM	#53
billogna Registered User Join Date: Apr 2002 Location: Choctaw, OK Posts: 235	Wish I had Jmac05's goodies, but I only installed a trailer harness and a hinge at the top of my license plate, so I don't have to take off the plate to tow. I installed the hidden hitch a year ago, and am just now doing this. __________________ '69 Chev Cust/10 swb, 350/700R4, 5"/6" '70 Chev C10 swb, 67 front, 454/700r4, 4"/5" '73 Chev stepper, 350/3 spd '84 Chev K20 350/4 spd '91 GMC 1500 Suburban 4x4, 350/700R4

10-14-2002, 09:01 PM	#54
mikep Used to have a truck Join Date: May 2002 Location: port orchard WA Posts: 1,552	I finally broke down and admitted that there is no way I can find the correct shifter boot for my truck so I went down to the junkyard and picked up a shifter boot retainer, sandblasted it and painted it. Then I installed it with the new incorrect shifter boot I got from GMCpaul. BTW if anyone needs a shift boot retainer for a 67-68 hi hump big block with the Close ratio 4 speed NP 435 M28 option let me know. I won't be using mine again. Its the only one I have ever seen. __________________ No truck :-(

10-14-2002, 10:50 PM	#55
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,091	Been workin' 2-4 hrs everyday gettin' all trim holes filled and all the odds and ends gettin' ready to paint hopefully sometime in Nov. __________________ 69 C-10, OWNED 35YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

10-14-2002, 10:53 PM	#56
LS1 K-5 Blazer Registered User Join Date: Aug 2002 Location: Bremerton, Wa Posts: 102	Started the body work on my big blazer. Put a new 1405 and performer intake on it and some chrome stuff (air cleaner, valve covers) Anyone here know how to tune the 1405 and intake. As far as air and fuel and timming? I also put a new distributor in my little blazer. Runs like a champ now 210,000 miles and the valve covers or anything else for that matter have not been off. __________________ Mike Friend 2004 Chevy Silverado 4x4 1971 K-5 Blazer

10-14-2002, 11:48 PM	#57
palallin Registered User Join Date: Jul 2002 Location: St. James, MO Posts: 1,239	I did it! Oil changed, chassis lubed. __________________ '69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt.

10-15-2002, 12:02 AM	#58
jmil1974 Ain't we cute? Join Date: May 2002 Location: Friendswood, TX Posts: 700	After finally getting brake lines and prop valve hooked up right(?) and bleeding yesterday -- I took off my spindles tonight to send back to gmcpaul. I got drop spindles instead of stock height like I ordered so he's sending me stock ones on his nickel. In case any of had doubts about Paul, one word . . . don't. He's top notch in every way. I highly recommend him for anything he carries. He has in me a customer for life. Put in my new glovebox too. __________________ 69 C10 2WD LWB Fleet 350/350 power front disc conversion (6 lug disc kit from gmcpauls) and new engine, PS, A/C, fresh fluids, SHE DRIVES! FOR SALE $3900

10-15-2002, 09:34 AM	#59
diggin69 Southern but in Ohio!!!! Join Date: Jan 2002 Location: Eaton,Oh. 45320 Posts: 467	After posting yesterday I went to the house, & took the tailgate off, trim, rods out, handle off, & the hinges, everthing will be getting striped down. I thought I would need a new tailgate but turns out this one can be saved, very straight, no dents, & with little dings on the inside, it feels good saving $380 for a new tailgate, hard telling what I will do tonight! __________________ 1969 C/10 3/4 ton 4x4 longbed custom, frame made from a 79 1972 custom-10 half/ton longbed 1980 1/2 ton 4x4 all original 350/350/205 with air Eaton,Oh rebelryder@hotmail.com

10-15-2002, 09:42 AM	#60
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,683	Separated the 2wd 4 speed manual tranny from the 454 and started to replace inner fender wells on my wife's car. It's an import and of all things they use plastic screws and retainers - that's pretty lame! I'll stick with my truck! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-15-2002, 09:56 AM	#61
kpf Registered User Join Date: Jun 2002 Location: Camas, Wa Posts: 58	got a few things done.. wired in some under dash courtesy lights, nice and bright when you get in at night, also put new dist. cap, rotor, module, plug wires. Accellerator pump Also got a slow leak in one of the tires fixed, while I was waiting for that the tire shop had a 68 rs/ss camaro for sale on their show room floor, real nice but wanted $55000 for it. I just had to laugh out loud.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.