FS. 92 350 TBI, tranny rearend, frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

57ringo · 05-09-2005, 11:39 PM

I have complete 350 TBI, 700 R4,,3.42 open 1/2 ton rearend. 87,000 miles.
Short frame with gas tank, suspension and fuel tank. Will sell all for $2,000 or part out. Also have an after market TBI wiring harness $175 and a set of chrome wheels ( ss454 style) with tires $200. Everything is setting in the frame and will run. I was going to put a 55 body on it but don't have the time now so I'm selling the chassis. Located in eastern Ks.

Portmod7 · 05-10-2005, 12:28 AM

Stock spindles? Are they in good shape? How much?

swbls12b · 05-10-2005, 12:57 AM

Is that a reg.cab shortbed frame?
I might be interested in just the frame and suspension.

57ringo · 05-10-2005, 07:31 AM

stock suspension regular cab short bed. I sandblasted and repainted the frame with PPG DP 90 epoxie primer. It's the same black as original. I want to sell the frame and suspension together. I want $750 for the frame, sus, rearend and fuel tank or $500 with out the rearend.

greg0380 · 05-10-2005, 08:11 AM

How much for just the rear, sounds like you want $250? Is it 5 lug wheel pattern?

patgizz · 05-10-2005, 02:37 PM

whose brand is the TBI harness and is it new or used?

57ringo · 05-10-2005, 03:38 PM

Rear is a 5 bolt pattern 2 wheel drive. I want $300 by itself. I buddy of mine bought one from a junk yard a while back for $350 for a low milage one.
The harness is brand new. I bought it at the Wichita swap meet several years ago from Phil Wyatt out of Anna Texas. He had a company called Electronic Fuel Injection. I dont know if they are still in bussiness or not.

patgizz · 05-10-2005, 04:39 PM

would you sell the harness for $175 shipped to medina ohio 44256?

alpha_male0203 · 05-10-2005, 04:49 PM

drivers right side fender? shipping to 52732?
How about the rear window if its a slider

57ringo · 05-10-2005, 07:10 PM

I'd sell it for $175 and ship it in a small box so it wouldn't cost you much freight.
I have no body parts here.

patgizz · 05-10-2005, 10:53 PM

Quote:

Originally Posted by 57ringo

I'd sell it for $175 and ship it in a small box so it wouldn't cost you much freight.
I have no body parts here.

ok i'll take it, pm me a total w/ shipping and let me know if you want paypal or otherwise.

Larry b · 05-10-2005, 11:41 PM

I'm interested in the wheels but not sure about the tires. What size are they and tread left? Can you get a shipping price to a business at 06066.
Thanks, Larry

57ringo · 05-11-2005, 12:06 AM

I'll try to get you a few pics tomorrow.

57ringo · 05-11-2005, 01:48 PM

I will be headed to the Dallas/Fort worth area in a week or so if that helps anyone and can bring the parts along.

57ringo · 05-12-2005, 07:49 PM

give me your email address. I have a few pics now.

my57210 · 05-13-2005, 10:29 AM

How much for the 350 and 700?

57ringo · 05-13-2005, 10:43 AM

I'll take $1250 for the Engine, stock wiring harness, computer, and 700R4 tranny. It has 87,000 miles on it. It is complete from pan to air cleaner with A/C compressor too. It starts right up fine. Give me your email and I can send a pic if you want. I pulled it out of a wrecked 92 1/2 ton several years back. It's been sitting in my shop since.

Pat
57ringo@bluestemtelco.com

partsman9606 · 07-19-2005, 09:03 PM

Looking for a driveshaft for this body style w/ a 350-700r4 shortie should be about 77.5 inches. How musch and shipped to 32034???

GenIIIShorty · 07-22-2005, 04:29 PM

put me second in line for the wheels, shipped to 99011

ronsk10 · 07-23-2005, 03:41 AM

how much for the AC compressor? Thanks

68_c10_on20s · 08-19-2005, 09:36 AM

you still got the block im in desprate need of a motor i blew mine last night i dont need the intake or puter just the block

57ringo · 09-02-2005, 12:03 AM

I don't want to part out the engine. I'll take $800 for the complete engine. I have a friend that lives in Dallas that drives back every so often.

57ringo · 09-02-2005, 12:05 AM

I don't know what it would cost to ship the wheels but I'll take $250 with tires and you pay the shipping.

milehightoyz · 09-02-2005, 03:16 PM

how much for everything? and how close can you get it to denver colorado? ive got a 58 body id like to put on it

57ringo · 09-06-2005, 06:05 PM

I'd take $1700 for what I have. I sold the aftermarket wiring harness but still have the one that came out of the 92. I don't have a trailer to meet you anyplace and don't know of anyone right off hand that is heading that way. If you want a picture, give me your email.

Pat

05-09-2005, 11:39 PM	#1
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	FS. 92 350 TBI, tranny rearend, frame I have complete 350 TBI, 700 R4,,3.42 open 1/2 ton rearend. 87,000 miles. Short frame with gas tank, suspension and fuel tank. Will sell all for $2,000 or part out. Also have an after market TBI wiring harness $175 and a set of chrome wheels ( ss454 style) with tires $200. Everything is setting in the frame and will run. I was going to put a 55 body on it but don't have the time now so I'm selling the chassis. Located in eastern Ks.

05-10-2005, 08:11 AM	#5
greg0380 Registered User Join Date: Dec 2003 Location: CT Posts: 454	How much for just the rear, sounds like you want $250? Is it 5 lug wheel pattern? __________________ 1985 GMC Sierra 1500, 1/2 ton, 2WD, LWB, TBI 305 5 speed, 3.42 rear 2007 GMC Sierra 1500, xtended cab, 4X4, flexfuel 5.3L 1999 BMW 528i

05-10-2005, 04:49 PM	#9
alpha_male0203 95 extended cab sportside Join Date: Jul 2004 Location: Clinton, Iowa western. Posts: 895	drivers right side fender? shipping to 52732? How about the rear window if its a slider __________________ 95 Chevy k 1500 00 Chevy Silverado 1500 07 cobalt Old ladies car]

05-13-2005, 10:29 AM	#16
my57210 Registered User Join Date: Oct 2003 Location: Collinsville, OK Posts: 33	How much for the 350 and 700? __________________ 1948 Chevy 3100 1931 Slant Window Ford 1947 Chevy Coupe 1966 VW Bug

07-19-2005, 09:03 PM	#18
partsman9606 a country boy can survive Join Date: Jul 2005 Location: Yulee, Fla Posts: 95	Driveshaft Looking for a driveshaft for this body style w/ a 350-700r4 shortie should be about 77.5 inches. How musch and shipped to 32034???

05-10-2005, 12:28 AM	#2
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Stock spindles? Are they in good shape? How much?

05-10-2005, 12:57 AM	#3
swbls12b Registered User Join Date: Oct 2004 Location: Wichita, Ks Posts: 88	Is that a reg.cab shortbed frame? I might be interested in just the frame and suspension.

05-10-2005, 07:31 AM	#4
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	stock suspension regular cab short bed. I sandblasted and repainted the frame with PPG DP 90 epoxie primer. It's the same black as original. I want to sell the frame and suspension together. I want $750 for the frame, sus, rearend and fuel tank or $500 with out the rearend.

05-10-2005, 02:37 PM	#6
patgizz Registered User Join Date: Oct 2002 Location: Cleveland, OH Posts: 429	whose brand is the TBI harness and is it new or used?

05-10-2005, 03:38 PM	#7
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	Rear is a 5 bolt pattern 2 wheel drive. I want $300 by itself. I buddy of mine bought one from a junk yard a while back for $350 for a low milage one. The harness is brand new. I bought it at the Wichita swap meet several years ago from Phil Wyatt out of Anna Texas. He had a company called Electronic Fuel Injection. I dont know if they are still in bussiness or not.

05-10-2005, 04:39 PM	#8
patgizz Registered User Join Date: Oct 2002 Location: Cleveland, OH Posts: 429	would you sell the harness for $175 shipped to medina ohio 44256?

05-10-2005, 07:10 PM	#10
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	I'd sell it for $175 and ship it in a small box so it wouldn't cost you much freight. I have no body parts here.

05-10-2005, 11:41 PM	#12
Larry b Registered User Join Date: Mar 2005 Location: CT. Posts: 26	I'm interested in the wheels but not sure about the tires. What size are they and tread left? Can you get a shipping price to a business at 06066. Thanks, Larry

05-11-2005, 12:06 AM	#13
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	I'll try to get you a few pics tomorrow.

05-11-2005, 01:48 PM	#14
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	I will be headed to the Dallas/Fort worth area in a week or so if that helps anyone and can bring the parts along.



Register or Log In To remove these advertisements.

05-12-2005, 07:49 PM	#15
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	give me your email address. I have a few pics now.

05-13-2005, 10:43 AM	#17
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	I'll take $1250 for the Engine, stock wiring harness, computer, and 700R4 tranny. It has 87,000 miles on it. It is complete from pan to air cleaner with A/C compressor too. It starts right up fine. Give me your email and I can send a pic if you want. I pulled it out of a wrecked 92 1/2 ton several years back. It's been sitting in my shop since. Pat 57ringo@bluestemtelco.com

07-22-2005, 04:29 PM	#19
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	put me second in line for the wheels, shipped to 99011 __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

07-23-2005, 03:41 AM	#20
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	how much for the AC compressor? Thanks

08-19-2005, 09:36 AM	#21
68_c10_on20s Registered User Join Date: Aug 2002 Location: Waxahachie TX Posts: 773	motor you still got the block im in desprate need of a motor i blew mine last night i dont need the intake or puter just the block __________________ 93 Fleet Budget Build http://s150.photobucket.com/albums/s...zted71/hoopty/

09-02-2005, 12:03 AM	#22
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	still got it I don't want to part out the engine. I'll take $800 for the complete engine. I have a friend that lives in Dallas that drives back every so often.

09-02-2005, 12:05 AM	#23
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	wheels I don't know what it would cost to ship the wheels but I'll take $250 with tires and you pay the shipping.

09-02-2005, 03:16 PM	#24
milehightoyz AttentionDeficitDisorder Join Date: Mar 2005 Location: COLORADO Posts: 600	how much for everything? and how close can you get it to denver colorado? ive got a 58 body id like to put on it

09-06-2005, 06:05 PM	#25
57ringo Registered User Join Date: Jun 2003 Location: Emporia Kansas Posts: 110	all I'd take $1700 for what I have. I sold the aftermarket wiring harness but still have the one that came out of the 92. I don't have a trailer to meet you anyplace and don't know of anyone right off hand that is heading that way. If you want a picture, give me your email. Pat

Register or Log In To remove these advertisements.