WA 71/72 Bucket Seat Foam - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Truckseats · 08-18-2013, 05:54 PM

Quote:

Originally Posted by swamp rat

Paypal sent.

Payment received. Thank you.

Flick · 08-31-2013, 05:15 PM

Price quote for a 70 bench top&bottom. Shipped to 94585. Your price seems good just curious on how much shipping is going to be :/

Procurement_man · 09-02-2013, 05:31 PM

Looking for foam on a bench seat that has bottom springs, I'm unsure if it was the original seat for my truck (a 1972) but going to use it. Quote for both top and bottom shipped to 73078.

Thank you kind sir.

Truckseats · 09-06-2013, 01:17 PM

Quote:

Originally Posted by Flick

Price quote for a 70 bench top&bottom. Shipped to 94585. Your price seems good just curious on how much shipping is going to be :/

You would be looking at $410 shipped. Thanks - Tim

Thanks for your patience. I have been on vacation.

Truckseats · 09-06-2013, 01:20 PM

Quote:

Originally Posted by Procurement_man

Looking for foam on a bench seat that has bottom springs, I'm unsure if it was the original seat for my truck (a 1972) but going to use it. Quote for both top and bottom shipped to 73078.

Thank you kind sir.

Your price would be $420 shipped.

Thanks for your patience. I have been on vacation.

71jimmy · 09-23-2013, 04:08 PM

Quote:

Originally Posted by 71jimmy

Thanks for the reply Truckseats. LMC apparently has the Blazer/Jimmy backseat foam, but it's pricey. I don't have the skill to build up foam myself, never did seats before, and my foam is coming apart, looks like yellow snow flakes on the bed floor

Need to get some prices from local shops to do the foam I guess.

Thanks

Tim, seems that the Blazer/Jimmy foam sold by LMC is actually the truck seat foam and they are unable to answer any install questions. Hopefully you have the answers so I can get this ordered from you.

1. Is the truck bench seat foam the same thickness as the Blazer/Jimmy rear seat? Or does it require adding or removing foam to make it the same thickness?

2. Will the truck bench seat foam only require the trimming of the sides to match the width of the Blazer/Jimmy bench seat?

I don't know if you've ever done this before, but if you have and have any specific info it would be appreciated. If I can, I would like to get the foam from the same vendor so the foam is the same in consistency, firmness etc. But if I have to add foam to the truck seat or worse, remove foam, to get the correct thickness I'll go with a local re-upholstery guy.

GobbleStalker · 09-23-2013, 05:25 PM

I am interested in 72 bench foam. Price shipped to 13601 plz.

heathbirkendahl · 09-23-2013, 05:33 PM

Guys I would buy the cheaper foam kit for the bench. The good stuff is WAY to firm and has me looking at the blue strip across the top of my window. I'm 6'1 and used to see fine. Now I need to have my seat redone because of the firmness. Just my two cents.

Truckseats · 09-30-2013, 09:31 PM

Quote:

Originally Posted by 71jimmy

Tim, seems that the Blazer/Jimmy foam sold by LMC is actually the truck seat foam and they are unable to answer any install questions. Hopefully you have the answers so I can get this ordered from you.

1. Is the truck bench seat foam the same thickness as the Blazer/Jimmy rear seat? Or does it require adding or removing foam to make it the same thickness?

2. Will the truck bench seat foam only require the trimming of the sides to match the width of the Blazer/Jimmy bench seat?

I don't know if you've ever done this before, but if you have and have any specific info it would be appreciated. If I can, I would like to get the foam from the same vendor so the foam is the same in consistency, firmness etc. But if I have to add foam to the truck seat or worse, remove foam, to get the correct thickness I'll go with a local re-upholstery guy.

Sorry for the delay. I missed this somehow. I have never removed the foam on a rear Blazer seat before to be able to compare for you or to be able to answer your question with confidence. All the rear benches I have had and do have all have nice foam on them. Maybe somebody can chime in on this one. Thanks

Truckseats · 09-30-2013, 09:34 PM

Quote:

Originally Posted by heathbirkendahl

Guys I would buy the cheaper foam kit for the bench. The good stuff is WAY to firm and has me looking at the blue strip across the top of my window. I'm 6'1 and used to see fine. Now I need to have my seat redone because of the firmness. Just my two cents.

Why don't you contact me on this when you have time and let's see what we can figure out to help you out with this.Thanks

Truckseats · 09-30-2013, 09:38 PM

Quote:

Originally Posted by GobbleStalker

I am interested in 72 bench foam. Price shipped to 13601 plz.

PM Sent. Thanks

kaphillips · 09-30-2013, 10:06 PM

OK here is question for the bucket seat gurus. If I bought OEM buckets from a 70 blazer and put 69-70 truck foam and removed the backs will it work and then have OEM truck bucket seats. Are the frames the same dimensions. I know all about the difference of the mounting tracks. This a seat only question.

RLTW375 · 10-05-2013, 09:28 PM

Hey your local! I will need some down the road.

Truckseats · 10-07-2013, 04:10 PM

Quote:

Originally Posted by kaphillips

OK here is question for the bucket seat gurus. If I bought OEM buckets from a 70 blazer and put 69-70 truck foam and removed the backs will it work and then have OEM truck bucket seats. Are the frames the same dimensions. I know all about the difference of the mounting tracks. This a seat only question.

PM sent. Thanks

Truckseats · 10-07-2013, 04:12 PM

Quote:

Originally Posted by RLTW375

Hey your local! I will need some down the road.

Nice to hear from you. Not too many of us around here. Great job on your build! Should be running soon. I have a couple blazers too. You're in for a lot of fun!

**JDL** · 04-08-2014, 09:45 PM

I need seat foam for Buddy Buckets

Truckseats · 04-10-2014, 09:45 AM

Quote:

Originally Posted by JDL

I need seat foam for Buddy Buckets

PM sent.

Truckseats · 05-27-2014, 04:00 PM

ttt

scrappy70 · 06-04-2014, 03:16 PM

How much for back/bottom foam for '70 C10 bench seat?

Truckseats · 06-05-2014, 09:52 AM

Quote:

Originally Posted by scrappy70

How much for back/bottom foam for '70 C10 bench seat?

PM sent. Thanks.

Truckseats · 06-24-2014, 06:11 PM

ttt

47thriftmaster · 06-24-2014, 08:00 PM

I would like a price for buddy buckets. Thank you

Truckseats · 06-24-2014, 09:55 PM

Quote:

Originally Posted by 47thriftmaster

I would like a price for buddy buckets. Thank you

PM sent. Thanks

Socalwrencher · 07-15-2014, 10:31 AM

Hi can i get a price on green/parchment highlander for a 72 C10. And the foam. Shipped to 87124.

Thanks

Truckseats · 07-19-2014, 08:30 PM

Quote:

Originally Posted by Socalwrencher

Hi can i get a price on green/parchment highlander for a 72 C10. And the foam. Shipped to 87124.

Thanks

Bench or buckets?

08-31-2013, 05:15 PM	#52
Flick Registered User Join Date: Jul 2013 Location: Suisun City, CA Posts: 359	Re: 71/72 Bucket Seat Foam Price quote for a 70 bench top&bottom. Shipped to 94585. Your price seems good just curious on how much shipping is going to be :/

09-02-2013, 05:31 PM	#53
Procurement_man Registered User Join Date: Sep 2012 Location: Piedmont, OK Posts: 64	Re: 71/72 Bucket Seat Foam Looking for foam on a bench seat that has bottom springs, I'm unsure if it was the original seat for my truck (a 1972) but going to use it. Quote for both top and bottom shipped to 73078. Thank you kind sir. __________________ "God will often give you more than you can handle so you can learn to depend on him rather than on yourself" ...Craig Groeschel

09-23-2013, 05:25 PM	#57
GobbleStalker GobbleStalker Calls Join Date: Aug 2010 Location: Port Hope, Ontario Posts: 653	Re: 71/72 Bucket Seat Foam I am interested in 72 bench foam. Price shipped to 13601 plz. __________________ 72 Chev Longbox Highlander edition. Med Olive/White/ Med Olive 350 4bbl with 350Turbo trans. Truck currently under construction. Project Cappaccino. Stay Tuned! 1967 Chevy C10, 327, 4.11 posi 3 spd. The Driver Truck! SOLD! 09 GMC Sierra SLT All Terrain pkg. 2014 Jeep Wrangler Sahara unlimited. ( The wifes ride )

09-23-2013, 05:33 PM	#58
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: 71/72 Bucket Seat Foam Guys I would buy the cheaper foam kit for the bench. The good stuff is WAY to firm and has me looking at the blue strip across the top of my window. I'm 6'1 and used to see fine. Now I need to have my seat redone because of the firmness. Just my two cents. __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

09-30-2013, 10:06 PM	#62
kaphillips Registered User Join Date: Jul 2013 Location: Amarillo Tx Posts: 502	Re: 71/72 Bucket Seat Foam OK here is question for the bucket seat gurus. If I bought OEM buckets from a 70 blazer and put 69-70 truck foam and removed the backs will it work and then have OEM truck bucket seats. Are the frames the same dimensions. I know all about the difference of the mounting tracks. This a seat only question.

10-05-2013, 09:28 PM	#63
RLTW375 Registered User Join Date: Oct 2010 Location: Tri-Cities, WA Posts: 95	Re: 71/72 Bucket Seat Foam Hey your local! I will need some down the road. __________________ 72 CST Blazer 4x4 (Revival in progress) http://67-72chevytrucks.com/vboard/s...d.php?t=430968

04-08-2014, 09:45 PM	#66
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,838	Re: 71/72 Bucket Seat Foam I need seat foam for Buddy Buckets __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

05-27-2014, 04:00 PM	#68
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: 71/72 Bucket Seat Foam ttt

06-04-2014, 03:16 PM	#69
scrappy70 Registered User Join Date: Jun 2012 Location: Sacramento, Ca Posts: 69	Re: 71/72 Bucket Seat Foam How much for back/bottom foam for '70 C10 bench seat?

06-24-2014, 06:11 PM	#71
Truckseats Registered User Join Date: Sep 2011 Location: Tri-Cities, Wa Posts: 1,612	Re: 71/72 Bucket Seat Foam ttt

06-24-2014, 08:00 PM	#72
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 71/72 Bucket Seat Foam I would like a price for buddy buckets. Thank you

07-15-2014, 10:31 AM	#74
Socalwrencher Registered User Join Date: Apr 2014 Location: Rio Rancho NM Posts: 11	Re: 71/72 Bucket Seat Foam Hi can i get a price on green/parchment highlander for a 72 C10. And the foam. Shipped to 87124. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.