PA So 1 more 72 blazer going under the knife - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1rippen6** · 03-01-2016, 11:05 PM

72 blazer body is shot and frame is spoken and seat are gone everything else is still available. Trying to sell the engine local so will not remove anything from that until I pull it. Just ask and I will get prices and pictures. My laptop is down right now so I am using my desk top so please give me time to respond makes things a little harder.

Parchment visors 80 plus shipping SOLD
Parchment seat belts fronts stained 80 shipped.SOLD
Nice fuel filler cover 60 plus shippingSOLD
rear floor section at tailgate 30 a square foot about 3 foot of it is nice.
radio section 50 plus shipping
top brackets 4 pcs 58 shippedSOLD
hatch struts 90 shippedSOLD

**1rippen6** · 03-01-2016, 11:06 PM

more pics

**1rippen6** · 03-01-2016, 11:07 PM

last one

NJKelly · 12-16-2018, 02:22 PM

Do you have the shift lever and the bellcrank for the automatic transmission. I'll try to attach a picture. Thanks

**1rippen6** · 12-16-2018, 04:16 PM

Yes, 45 plus shipping if still interested send me your zip and I'll get a quote.

NJKelly · 12-16-2018, 08:28 PM

Quote:

Originally Posted by 1rippen6

Yes, 45 plus shipping if still interested send me your zip and I'll get a quote.

I don't think that's the part I need, this is for 72 Blazer

**1rippen6** · 12-16-2018, 09:37 PM

That's the bell crank and shift rod from the column. I may have the shift lever also I'll look tomorrow.

**MikeCofield** · 03-01-2016, 11:11 PM

Any tow hooks , leveling mats ? And how much is the luggage rack

**1rippen6** · 03-01-2016, 11:15 PM

Quote:

Originally Posted by MikeCofield

Any tow hooks , leveling mats ? And how much is the luggage rack

Sorry no tow hooks or leveling mats let me look at the rack tomorrow and get some pictures and will figure out a price then. Auto high hump 60 plus shipping if interested send me you zip and I can get a quote.

**MikeCofield** · 03-01-2016, 11:14 PM

And how much on the hump

**1rippen6** · 03-02-2016, 10:20 PM

Quote:

Originally Posted by MikeCofield

And how much on the hump

High hump is 29 for shipping luggage rack is complete no broken pieces will need rechromed to be nice 80 plus shipping I should have taken a picture of the high hump but no issues no bad rust or pitting.

**MikeCofield** · 03-01-2016, 11:45 PM

36260

stick72 · 03-02-2016, 07:23 AM

I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064

Thanks

**1rippen6** · 03-02-2016, 08:29 AM

Quote:

Originally Posted by stick72

I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064

Thanks

I will take them off tonight and get some pictures and price.

**1rippen6** · 03-02-2016, 10:24 PM

Quote:

Originally Posted by stick72

I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064

Thanks

These are pretty bad also look at pictures if still interested I can get you a quote

**richard2717** · 03-02-2016, 08:07 AM

How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

**1rippen6** · 03-02-2016, 08:31 AM

Quote:

Originally Posted by richard2717

How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

The one tub doesn't look bad at first glance but let me get them removed and check it out and the floor.

**1rippen6** · 03-02-2016, 10:27 PM

Quote:

Originally Posted by richard2717

How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

There may be some usable pieces there but will have to give me a couple of days to get that far on disassembly. Would you still be interested in the wheel tub if it has roll bar holes?

**richard2717** · 03-02-2016, 11:10 PM

Quote:

Originally Posted by 1rippen6

There may be some usable pieces there but will have to give me a couple of days to get that far on disassembly. Would you still be interested in the wheel tub if it has roll bar holes?

No rush here. As long as the mounting flanges are good and not beat all up I can work with the extra holes. Would all depend on price and I could wait till you come to va this summer if needed

**1rippen6** · 03-08-2016, 10:57 PM

Quote:

Originally Posted by richard2717

How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

Haven't forgot about you should get that far this weekend hopefully. I see in another thread you were asking about a set of buddy buckets. I have a buddy that has a set out of a 68 suburban that he wants to sell for 250 if interested I can get some pictures. Bonus is you wouldn't have to pay for shipping I can deliver this spring!! Same guy wanting the softray glass

**1rippen6** · 03-21-2016, 08:22 PM

Quote:

Originally Posted by richard2717

How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub.

Richard see below for link to floor and tub will give you first refusal.

http://67-72chevytrucks.com/vboard/s...=1#post7530770

**k5blazin** · 03-21-2016, 08:37 PM

Got the shroud! Looks good thanks.

Ta12sec · 03-02-2016, 08:19 AM

How's the grill surround?

**1rippen6** · 03-02-2016, 08:32 AM

Quote:

Originally Posted by Ta12sec

How's the grill surround?

Surround doesn't have any holes but does have some dents in the bottom will try and get some pictures tonight.

**jimer1964** · 03-02-2016, 08:38 AM

Hi, Interested in the visors can you put up some pictures when you get time? Thanks

03-01-2016, 11:05 PM	#1
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	So 1 more 72 blazer going under the knife 72 blazer body is shot and frame is spoken and seat are gone everything else is still available. Trying to sell the engine local so will not remove anything from that until I pull it. Just ask and I will get prices and pictures. My laptop is down right now so I am using my desk top so please give me time to respond makes things a little harder. Parchment visors 80 plus shipping SOLD Parchment seat belts fronts stained 80 shipped.SOLD Nice fuel filler cover 60 plus shippingSOLD rear floor section at tailgate 30 a square foot about 3 foot of it is nice. radio section 50 plus shipping top brackets 4 pcs 58 shippedSOLD hatch struts 90 shippedSOLD Attached Images Last edited by 1rippen6; 03-12-2019 at 06:00 PM.

03-01-2016, 11:06 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife more pics Attached Images

03-01-2016, 11:07 PM	#3
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife last one Attached Images

12-16-2018, 02:22 PM	#4
NJKelly Registered User Join Date: Mar 2018 Location: New Jersey Posts: 377	Re: So 1 more 72 blazer going under the knife Do you have the shift lever and the bellcrank for the automatic transmission. I'll try to attach a picture. Thanks Attached Images

12-16-2018, 04:16 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife Yes, 45 plus shipping if still interested send me your zip and I'll get a quote. Attached Images

12-16-2018, 09:37 PM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,710	Re: So 1 more 72 blazer going under the knife That's the bell crank and shift rod from the column. I may have the shift lever also I'll look tomorrow.

03-01-2016, 11:11 PM	#8
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,913	Re: So 1 more 72 blazer going under the knife Any tow hooks , leveling mats ? And how much is the luggage rack

03-01-2016, 11:14 PM	#10
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,913	Re: So 1 more 72 blazer going under the knife And how much on the hump

03-01-2016, 11:45 PM	#12
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,913	Re: So 1 more 72 blazer going under the knife 36260

03-02-2016, 07:23 AM	#13
stick72 Registered User Join Date: Jun 2015 Location: Nashville, TN Posts: 43	Re: So 1 more 72 blazer going under the knife I would be interested in the tailgate seals, mine are pretty bad. Zip is 37064 Thanks

03-02-2016, 08:07 AM	#16
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,887	Re: So 1 more 72 blazer going under the knife How is the rear floor around the wheel tubs, any rust thru? I need about 4-6" past the tubs on both sides for one of my projects and at least one more tub. __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

03-21-2016, 08:37 PM	#22
k5blazin Senior Member Join Date: Oct 2009 Location: potsdam ny Posts: 402	Re: So 1 more 72 blazer going under the knife Got the shroud! Looks good thanks.

03-02-2016, 08:19 AM	#23
Ta12sec Registered User Join Date: Apr 2015 Location: Miami fl Posts: 150	Re: So 1 more 72 blazer going under the knife How's the grill surround?

03-02-2016, 08:38 AM	#25
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,677	Re: So 1 more 72 blazer going under the knife Hi, Interested in the visors can you put up some pictures when you get time? Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.