axle break - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1969 k/10 · 02-23-2009, 11:03 PM

This is what happens when your try and burn out like an idiot with a 40 year old k/10 that is wheel hopping in the rain.

**special-K** · 02-24-2009, 09:43 AM

Aw c`mon!We want more details.

Tell us more about your truck,etc.

1969 k/10 · 02-25-2009, 12:59 AM

Uh you want to no more about how it happened or like stuff about the actual truck?

**special-K** · 02-25-2009, 06:58 AM

Just curious about your story and what tires,gears,and such your truck has.

dammitmitchell · 02-25-2009, 03:09 PM

he he he
i feel your pain..!

62 short step · 02-25-2009, 08:39 PM

Ouch!!

CPNEJR · 02-25-2009, 09:27 PM

i've done something similar except it was my front axle and i was plowing

meansting04 · 02-25-2009, 10:09 PM

Sorry for the breakage. I guess you will build it better next time. Stock parts have a way of being the weak link.

1969 k/10 · 02-26-2009, 10:53 AM

Quote:

Originally Posted by special-K

Just curious about your story and what tires,gears,and such your truck has.

It was wet out but starting to dry up a little bit. I thought what the hell I'll do a little burnout on the deserted road. The truck started wheel hopping and then i heard a bang. I looked at the rear tire as it was sticking out a few inches.

My truck is a 1969 with a 350 and auto trans. It has 4.11's and 32 in. tires.

**special-K** · 02-26-2009, 11:01 AM

OUCH! I`ve only broken front axles.It always seems to be where the wheels are spinning and one grabs.SNAP!! Are you just putting a used shaft in?If you`re getting more into it there`s chrome alloy shafts that are tougher.

Jtrux · 02-26-2009, 05:18 PM

upgrade time.

02-23-2009, 11:03 PM	#1
1969 k/10 Registered User Join Date: Jun 2008 Location: Santa Rosa, California Posts: 102	axle break This is what happens when your try and burn out like an idiot with a 40 year old k/10 that is wheel hopping in the rain. __________________ 1969 red k/10 with sb350 4.11 gear ratio, front disk, 3 speed automatic

02-24-2009, 09:43 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: axle break Aw c`mon!We want more details. Tell us more about your truck,etc. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-25-2009, 12:59 AM	#3
1969 k/10 Registered User Join Date: Jun 2008 Location: Santa Rosa, California Posts: 102	Re: axle break Uh you want to no more about how it happened or like stuff about the actual truck? __________________ 1969 red k/10 with sb350 4.11 gear ratio, front disk, 3 speed automatic

02-25-2009, 06:58 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: axle break Just curious about your story and what tires,gears,and such your truck has. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-25-2009, 03:09 PM	#5
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: axle break he he he i feel your pain..! __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

02-25-2009, 08:39 PM	#6
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: axle break Ouch!! __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

02-25-2009, 09:27 PM	#7
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: axle break i've done something similar except it was my front axle and i was plowing __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

02-25-2009, 10:09 PM	#8
meansting04 Registered User Join Date: Aug 2008 Location: travis afb Posts: 304	Re: axle break Sorry for the breakage. I guess you will build it better next time. Stock parts have a way of being the weak link. __________________ 67 gmc 1/2 ton, 5.0 v6, 4 speed SOLD!! 70 Chevy C-10, 355, th400, 3.73's 2/4 drop

02-26-2009, 11:01 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: axle break OUCH! I`ve only broken front axles.It always seems to be where the wheels are spinning and one grabs.SNAP!! Are you just putting a used shaft in?If you`re getting more into it there`s chrome alloy shafts that are tougher. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

02-26-2009, 05:18 PM	#11
Jtrux I'm a poor spectator Join Date: Aug 2006 Location: San Antonio, Tx Posts: 2,287	Re: axle break upgrade time. __________________ 2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig 1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!! 1979 Ford F150 4x4 SWB Built Ford Tough!!! 1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.