Factory molded hood insulation, where are you buying it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**57NAPCO** · 03-02-2021, 12:25 AM

Just trying to find out where is the best place to buy good quality with the factory molded look and fit.
Thanks

****USA1 is on back order and don’t know when it will be available

**TKCR** · 03-02-2021, 09:37 AM

It’s not factory, but I have this.

**57NAPCO** · 03-02-2021, 09:59 AM

I like that but I’m tryin’ to go original on my 87 project.

Thanks!

**TKCR** · 03-02-2021, 10:09 AM

Quote:

Originally Posted by 57NAPCO

I like that but I’m tryin’ to go original on my 87 project.

Thanks!

I looked around at a few sights, didn’t see any, or they too were out of stock.

calvin78612 · 03-02-2021, 10:19 AM

Look on ebay, there is a company out of Mich. that is making nice insulation for these trucks that is reasonably priced and quick shipping. Let me see if i can find a link.

calvin78612 · 03-02-2021, 10:26 AM

Can't find the mich. one but there are several on ebay

**TKCR** · 03-02-2021, 10:40 AM

Not sure if this is exactly what your looking for.
https://www.detroitmuscletechnologie...0-c20-k10-k20/

kipps · 03-02-2021, 11:52 AM

Did all trucks have this underhood insulation? Or was it similar to the headliner, in that the baseline trim packages skipped it altogether?

Also, what purpose does it serve? Noise control, or protecting the paint?

**mongocanfly** · 03-02-2021, 02:54 PM

Mine never had the insulation..I got one off Ebay, free shipping..
I assumed it was for heat and noise...I got it more for the clean look..

wazzabie · 03-02-2021, 03:30 PM

I don't think all trucks got the hood insulation. Just in higher trim lines and in trucks with the cold climate package.

Mine is so dirty. I wonder if a flame were to catch it if it would go up in flames. I've thought about taking it out or replacing it.

**bhc41051** · 03-03-2021, 10:30 PM

I wanted OEM also. But this one from Quiet Ride is really nice. The insulation is precut. Some of the holes didn't line up but a drill bit is supplied. $218 shipped.

wazzabie · 03-03-2021, 11:34 PM

Were the holes in your hood predrilled at the factory?

**TKCR** · 03-04-2021, 08:44 AM

Quote:

Originally Posted by wazzabie

Were the holes in your hood predrilled at the factory?

Mine was. It was a NOS hood when I bought it.

**Hart_Rod** · 03-04-2021, 02:41 PM

Quote:

Originally Posted by bhc41051

I wanted OEM also. But this one from Quiet Ride is really nice. The insulation is precut. Some of the holes didn't line up but a drill bit is supplied. $218 shipped.

How close to OEM is it?

wazzabie · 03-04-2021, 05:14 PM

Quote:

Originally Posted by Hart_Rod

How close to OEM is it?

My OEM hood insulation is more frayed then what it looks like in the photos. Maybe just because it is well used or maybe because it always has been that way.

My concern with the insulation is that it may fall down or catch on fire. It has never fallen down but just a concern. So people also have mentioned that the hood insulation is a fire blanket but I don't believe it. I wonder if the insulation would catch fire. I should cut off a piece of the OEM and test it.

I would also recommend testing the new repo also to see if it can catch a flame. Just cut off a small square and see what happens.

wazzabie · 03-04-2021, 05:18 PM

Quote:

Originally Posted by TKCR

Mine was. It was a NOS hood when I bought it.

Does your NOS hood have the front lip? Mid 78 I think the front of the hood changed from a flush front to a front edge that has a lip on the hood. All NOS hoods I've seen have the front lip. A non front lip would have been made before 1978. I'm not sure why GM changed the hood design.

**TKCR** · 03-04-2021, 09:08 PM

Quote:

Originally Posted by wazzabie

Does your NOS hood have the front lip? Mid 78 I think the front of the hood changed from a flush front to a front edge that has a lip on the hood. All NOS hoods I've seen have the front lip. A non front lip would have been made before 1978. I'm not sure why GM changed the hood design.

It’s an 86.

kelsfine69 · 03-05-2021, 12:16 PM

Following. Also looking for my 87

**57NAPCO** · 03-05-2021, 12:28 PM

I just went to USA1 and was able to order one, on the phone the other day the gal told me they were out of stock...

Around 75 bucks shipped

**bhc41051** · 03-06-2021, 11:21 AM

My 75 hood was factory drilled. The Quietride Acoustihood had about six holes that lined up with holes in the hood. That was enough to line it up properly But I had to drill the rest.
It's not even close to stock. but it's really really nice.

https://www.quietride.com/acoustihood.html

03-02-2021, 12:25 AM	#1
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,208	Factory molded hood insulation, where are you buying it? Just trying to find out where is the best place to buy good quality with the factory molded look and fit. Thanks ****USA1 is on back order and don’t know when it will be available

03-02-2021, 09:37 AM	#2
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,853	Re: Factory molded hood insulation, where are you buying it? It’s not factory, but I have this. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

03-02-2021, 09:59 AM	#3
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,208	Re: Factory molded hood insulation, where are you buying it? I like that but I’m tryin’ to go original on my 87 project. Thanks!

03-02-2021, 10:19 AM	#5
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 802	Re: Factory molded hood insulation, where are you buying it? Look on ebay, there is a company out of Mich. that is making nice insulation for these trucks that is reasonably priced and quick shipping. Let me see if i can find a link. __________________ 84 step side 87 swb

03-02-2021, 10:26 AM	#6
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 802	Re: Factory molded hood insulation, where are you buying it? Can't find the mich. one but there are several on ebay __________________ 84 step side 87 swb

03-02-2021, 10:40 AM	#7
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 6,853	Re: Factory molded hood insulation, where are you buying it? Not sure if this is exactly what your looking for. https://www.detroitmuscletechnologie...0-c20-k10-k20/ __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR

03-02-2021, 11:52 AM	#8
kipps Registered User Join Date: Jul 2014 Location: North-central Virginia Posts: 1,099	Re: Factory molded hood insulation, where are you buying it? Did all trucks have this underhood insulation? Or was it similar to the headliner, in that the baseline trim packages skipped it altogether? Also, what purpose does it serve? Noise control, or protecting the paint? __________________ 1987 C6P V20 truck, 2010 LMG 5.3, AFM delete, 2010 Camaro exhaust manifolds, 1997 nv4500, 1991 np241c, hydroboost, 2005 14bff axle & driveshaft, drop-n-lock gooseneck, 4.10 gears, stock suspension, rims, and tires. Still a work in progress. Any questions or suggestions are welcome!

03-02-2021, 02:54 PM	#9
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,581	Re: Factory molded hood insulation, where are you buying it? Mine never had the insulation..I got one off Ebay, free shipping.. I assumed it was for heat and noise...I got it more for the clean look.. __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

03-02-2021, 03:30 PM	#10
wazzabie Registered User Join Date: Dec 2011 Location: WA Posts: 358	Re: Factory molded hood insulation, where are you buying it? I don't think all trucks got the hood insulation. Just in higher trim lines and in trucks with the cold climate package. Mine is so dirty. I wonder if a flame were to catch it if it would go up in flames. I've thought about taking it out or replacing it.

03-03-2021, 10:30 PM	#11
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 784	Re: Factory molded hood insulation, where are you buying it? I wanted OEM also. But this one from Quiet Ride is really nice. The insulation is precut. Some of the holes didn't line up but a drill bit is supplied. $218 shipped. Attached Images

03-03-2021, 11:34 PM	#12
wazzabie Registered User Join Date: Dec 2011 Location: WA Posts: 358	Re: Factory molded hood insulation, where are you buying it? Were the holes in your hood predrilled at the factory?

03-05-2021, 12:16 PM	#18
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Factory molded hood insulation, where are you buying it? Following. Also looking for my 87 __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

03-05-2021, 12:28 PM	#19
57NAPCO F’B’D guy Join Date: Feb 2004 Location: Texas/Maine Posts: 2,208	Re: Factory molded hood insulation, where are you buying it? I just went to USA1 and was able to order one, on the phone the other day the gal told me they were out of stock... Around 75 bucks shipped

03-06-2021, 11:21 AM	#20
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 784	Re: Factory molded hood insulation, where are you buying it? My 75 hood was factory drilled. The Quietride Acoustihood had about six holes that lined up with holes in the hood. That was enough to line it up properly But I had to drill the rest. It's not even close to stock. but it's really really nice. https://www.quietride.com/acoustihood.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.