67 fleet smallback glass - The 1947 - Present Chevrolet & GMC Truck Message Board Network

band-aid · 11-11-2002, 07:47 PM

is it a tough job to switch over to front discs from drums? also is there a good way to fix frame where the coils anchor to the frame? any advice would be appreciated .
thanks
Band-aid

bigvinnie · 11-11-2002, 08:15 PM

disc swap is easy if you have all the parts, the right tools and a place to do it... not sure what you mean about fixing the frame.... is it the frame (above the spring) or the trailing arm (below the spring)...?? is it bent or rusted or what?

11-11-2002, 07:47 PM	#1
band-aid Registered User Join Date: Nov 2002 Location: Wv. Posts: 1	67 fleet smallback glass is it a tough job to switch over to front discs from drums? also is there a good way to fix frame where the coils anchor to the frame? any advice would be appreciated . thanks Band-aid

11-11-2002, 08:15 PM	#2
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	disc swap is easy if you have all the parts, the right tools and a place to do it... not sure what you mean about fixing the frame.... is it the frame (above the spring) or the trailing arm (below the spring)...?? is it bent or rusted or what? __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.