CA 69 Chevy C-10 Panel/Suburban Bucket Seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Sublvr72* · 01-31-2010, 10:21 PM

Asking $250 OBO for the pair of buckets, the passenger side folds forwards pulled from a 69 Panel

They bolt in the factory floor holes, appear to be OEM for a panel truck, will fit pickups as well

*Sublvr72* · 02-03-2010, 04:42 PM

bump

*Sublvr72* · 02-05-2010, 06:13 PM

bump

BYoung35 · 02-05-2010, 09:20 PM

What is the best you can do shipped to 74766 ?

*Sublvr72* · 02-07-2010, 04:42 PM

Shipping would probably be around $100

BYoung35 · 02-07-2010, 08:16 PM

If the total is $350 i will pass.

*Sublvr72* · 02-09-2010, 01:15 AM

price is obo...what price works for you?

BYoung35 · 02-09-2010, 10:22 PM

$250 shipped ? Do they come with the floor bracket for the passenger side ?

BYoung35 · 02-11-2010, 06:38 AM

I found some at a local scrap yard.
Thanks B J

*Sublvr72* · 02-12-2010, 12:20 AM

bump

*Sublvr72* · 02-17-2010, 02:41 PM

bump, no interest in utility buckets????

crewcab67 · 02-18-2010, 10:59 PM

what is shipping to vancouver WA 98682

71 shortbedfleetside · 02-18-2010, 11:10 PM

I tried to ship a pair of seats to I think close to Ok. and it was like $400.

**jerry moss** · 02-21-2010, 12:39 AM

i just recently shipped a pair of 73 truck buckets to nebraska and it was around 90 bucks including 2 pairs of the mounting brackets that are welded to the floor on 73 up trucks. the total weight on mine was 74 pounds. i stacked the seats one on top of the other like a pair of "L"s, wrapped with plastic wrap and duct tape so they were somewhat square and put them in a tight fitting cardboard box. they originally quoted me 140 bucks using my measurements and a guesstimate weight of 75 pounds but when i hauled them in to ship the cost was considerably less---and yes i refunded the buyer 50 bucks.

**Baketown Scotty** · 02-22-2010, 02:47 PM

I am interested. The front corner of one appears like it is sagging, is that just the padding worn out or broken spring? Is all mounting hardware included? Should fit in a 1969 Blazer? What is your bottom dollar? I can pickup.

*Sublvr72* · 02-26-2010, 08:03 AM

The front drivers seat isn't sagging, it's the foam that's worn. All mounting hardware is included and it should bolt right into a blazer. LMK, I'm only an hour and a half from bakersfield

*Sublvr72* · 03-03-2010, 07:21 AM

bump

**Baketown Scotty** · 03-12-2010, 07:06 PM

Are the seats still available? How is $200 for an offer?

*Sublvr72* · 03-12-2010, 11:29 PM

yep, still got them. If you are willing to drive down to pick them up I can probably work with that.

*Sublvr72* · 03-19-2010, 03:51 AM

bump

**Baketown Scotty** · 03-26-2010, 11:38 AM

I am still interested and can pick up next week.

crewcab67 · 03-28-2010, 09:17 PM

Quote:

Originally Posted by Baketown Scotty

I am interested. The front corner of one appears like it is sagging, is that just the padding worn out or broken spring? Is all mounting hardware included? Should fit in a 1969 Blazer? What is your bottom dollar? I can pickup.

I don't think they are the same as blazer, the floor on the right side is different

**Baketown Scotty** · 03-29-2010, 04:06 PM

Can anyone confirm if they will both match up with the mounting holes in a blazer?

*67/72junkie* · 03-30-2010, 11:58 PM

If you can take pics of seats upside down so I can see mounts and measure from center to center on the front to rear bolt holes I can let you know.I have several sets of cst style buckets with blazer mounts just no utility buckets.From the pics you have they look to have the correct driver side slider and passenger side flip forward just sitting on opposite sides in the pics.I just measured a set of 72 cst bucket blazer mounts driver side and the bolt holes are 12 7/8" from center to center front to rear.hope this helps.

01-31-2010, 10:21 PM	#1
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	69 Chevy C-10 Panel/Suburban Bucket Seats Asking $250 OBO for the pair of buckets, the passenger side folds forwards pulled from a 69 Panel They bolt in the factory floor holes, appear to be OEM for a panel truck, will fit pickups as well

02-03-2010, 04:42 PM	#2
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats bump

02-05-2010, 06:13 PM	#3
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats bump

02-05-2010, 09:20 PM	#4
BYoung35 Registered User Join Date: Apr 2009 Location: Wright City ,Oklahoma Posts: 41	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats What is the best you can do shipped to 74766 ?

02-07-2010, 04:42 PM	#5
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats Shipping would probably be around $100

02-07-2010, 08:16 PM	#6
BYoung35 Registered User Join Date: Apr 2009 Location: Wright City ,Oklahoma Posts: 41	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats If the total is $350 i will pass.

02-09-2010, 01:15 AM	#7
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats price is obo...what price works for you?

02-09-2010, 10:22 PM	#8
BYoung35 Registered User Join Date: Apr 2009 Location: Wright City ,Oklahoma Posts: 41	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats $250 shipped ? Do they come with the floor bracket for the passenger side ?

02-11-2010, 06:38 AM	#9
BYoung35 Registered User Join Date: Apr 2009 Location: Wright City ,Oklahoma Posts: 41	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats I found some at a local scrap yard. Thanks B J

02-12-2010, 12:20 AM	#10
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats bump

02-17-2010, 02:41 PM	#11
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats bump, no interest in utility buckets????

02-18-2010, 10:59 PM	#12
crewcab67 Registered User Join Date: Aug 2007 Location: vancouver WA Posts: 195	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats what is shipping to vancouver WA 98682

02-18-2010, 11:10 PM	#13
71 shortbedfleetside Registered User Join Date: Jun 2005 Location: Simi Valley, Ca. Posts: 351	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats I tried to ship a pair of seats to I think close to Ok. and it was like $400.

02-21-2010, 12:39 AM	#14
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,753	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats i just recently shipped a pair of 73 truck buckets to nebraska and it was around 90 bucks including 2 pairs of the mounting brackets that are welded to the floor on 73 up trucks. the total weight on mine was 74 pounds. i stacked the seats one on top of the other like a pair of "L"s, wrapped with plastic wrap and duct tape so they were somewhat square and put them in a tight fitting cardboard box. they originally quoted me 140 bucks using my measurements and a guesstimate weight of 75 pounds but when i hauled them in to ship the cost was considerably less---and yes i refunded the buyer 50 bucks. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

02-22-2010, 02:47 PM	#15
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats I am interested. The front corner of one appears like it is sagging, is that just the padding worn out or broken spring? Is all mounting hardware included? Should fit in a 1969 Blazer? What is your bottom dollar? I can pickup.



Register or Log In To remove these advertisements.

02-26-2010, 08:03 AM	#16
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats The front drivers seat isn't sagging, it's the foam that's worn. All mounting hardware is included and it should bolt right into a blazer. LMK, I'm only an hour and a half from bakersfield

03-03-2010, 07:21 AM	#17
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats bump

03-12-2010, 07:06 PM	#18
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats Are the seats still available? How is $200 for an offer?

03-12-2010, 11:29 PM	#19
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats yep, still got them. If you are willing to drive down to pick them up I can probably work with that.

03-19-2010, 03:51 AM	#20
Sublvr72 Account Suspended Join Date: May 2004 Location: Simi Valley, CA Posts: 1,387	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats bump

03-26-2010, 11:38 AM	#21
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats I am still interested and can pick up next week.

03-29-2010, 04:06 PM	#23
Baketown Scotty Junior Member Join Date: Oct 2005 Location: Bakersfield, CA Posts: 304	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats Can anyone confirm if they will both match up with the mounting holes in a blazer?

03-30-2010, 11:58 PM	#24
67/72junkie Account Suspended Join Date: Oct 2002 Location: NC Posts: 1,129	Re: 69 Chevy C-10 Panel/Suburban Bucket Seats If you can take pics of seats upside down so I can see mounts and measure from center to center on the front to rear bolt holes I can let you know.I have several sets of cst style buckets with blazer mounts just no utility buckets.From the pics you have they look to have the correct driver side slider and passenger side flip forward just sitting on opposite sides in the pics.I just measured a set of 72 cst bucket blazer mounts driver side and the bolt holes are 12 7/8" from center to center front to rear.hope this helps. Last edited by 67/72junkie; 03-31-2010 at 12:04 AM.

Register or Log In To remove these advertisements.