|
05-01-2011, 08:19 PM
|
#1 |
|
Registered User
Join Date: Feb 2011
Location: New Hampshire
Posts: 49
|
Wood bed assembly
My son and I are faced with a marginal short bed condition.The rear quarters are pretty rusted on the inside so we are thinking about buying repros. Having a hard time looking at another thousand for the bed bottom so we are thinking about wood. Do the inner wheel wells and quarters etc.get bedded in a caulking during assembly or is it all bolted together dry?
|
|
|
|
05-01-2011, 10:46 PM
|
#2 |
|
Senior Member
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,339
|
Re: Wood bed assembly
ttt
__________________
A husband can be right...or...A husband can be happy.  67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.  1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc   JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
|
|
|
|
05-02-2011, 10:30 AM
|
#3 |
|
1965 Chevy C10, 2005 4.8L/4l60
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
|
Re: Wood bed assembly
my bed was done dry. I would put some bedliner stuff on the bed first then put the bed in it, it will protect the metal, also make sure the prep is done right on the bed before you line it.
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684  support our troops! Last edited by Clyde65; 05-02-2011 at 10:30 AM. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
