The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-08-2019, 07:23 PM   #1
ron350
Registered User
 
ron350's Avatar
 
Join Date: Apr 2007
Location: Birmingham AL
Posts: 250
Turbo 350 dipstick o-ring size?

Turbo 350 dipstick o-ring size?

Can any one give me the o-ring size for a Turbo 350 dipstick tube?
__________________
Stock 75 C10 step side.
350 2 BBL, 350 trans. 150K miles.
ron350 is offline   Reply With Quote
Old 07-09-2019, 09:30 AM   #2
Big Blue
Registered User
 
Big Blue's Avatar
 
Join Date: Feb 2005
Location: Northeast--Bethlehem, Pennslyvania
Posts: 642
Re: Turbo 350 dipstick o-ring size?

I to would like to know this information.
John
__________________
Big Blue ( John )
79 Chevy Pick up.....My Dailey


STILL Working on a frame up: 1987 Truck body on a 78 Blazer frame. Need cab blasted to start project. Got the cab BLASTED, Now Prep and Paint. Started to lay SOME BONDO and primer. Done, Ordering paint. Got paint, Stuff painted,Cab,Fenders, Hood more later. 9/7/2015 Got the clear coat on,now time to take one off. Started to put things back (What a nightmare) like the heating and AC stuff,inside wire harness, outside AC unit and booster, still more. May 2016, still working on the inside. Got duck work in,heating and AC. Radio (stock) in dash with after market in console later, Speaker are hooked up, Steering column is in. Getting ready to drop the cab onto the frame, Working on engine now since I have the room. Well here it is 2018, got the engine in and it runs, now I need to get the exhaust system in so I can adjust the lifters, to loud right now. Got the exhaust on now I am waiting for the break parts to come in.
Big Blue is offline   Reply With Quote
Old 07-09-2019, 11:13 AM   #3
ron350
Registered User
 
ron350's Avatar
 
Join Date: Apr 2007
Location: Birmingham AL
Posts: 250
Re: Turbo 350 dipstick o-ring size?

I would be grateful for a brand name part # but I was hoping for a – o ring part number.

For example the o-ring for the small spedo housing is a –115 and I think the modulator o-ring is a –115.
__________________
Stock 75 C10 step side.
350 2 BBL, 350 trans. 150K miles.
ron350 is offline   Reply With Quote
Old 07-09-2019, 03:33 PM   #4
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: Turbo 350 dipstick o-ring size?

if running dip stick tube with o-ring style flare put rtv around it to the case after its installed in the trans . make sure its clean and dry or goo and oils . let cure up good and then fill . there known for leaking even with a good o-ring on them .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote
Old 07-09-2019, 05:14 PM   #5
Jake Wade
Registered User
 
Jake Wade's Avatar
 
Join Date: Aug 2005
Location: Louisiana
Posts: 711
Re: Turbo 350 dipstick o-ring size?

ATP part # SO33
Jake Wade is offline   Reply With Quote
Old 07-09-2019, 06:34 PM   #6
ron350
Registered User
 
ron350's Avatar
 
Join Date: Apr 2007
Location: Birmingham AL
Posts: 250
Re: Turbo 350 dipstick o-ring size?

Thanks Sweetk30 I will seal dipstick tube on the outside of the case like you say.

Thanks Jake Wade I will check out the ATP o-ring.
__________________
Stock 75 C10 step side.
350 2 BBL, 350 trans. 150K miles.
ron350 is offline   Reply With Quote
Old 07-12-2019, 08:23 PM   #7
ron350
Registered User
 
ron350's Avatar
 
Join Date: Apr 2007
Location: Birmingham AL
Posts: 250
Re: Turbo 350 dipstick o-ring size?

OK the o-ring for the dipstick tube, modulator valve and the small spedo housing are the same size.
Rockauto sells these under ATP SO33 and Pioneer #76200110.
.
The Parker o-ring book lists these as size –115 which measures 11/16” ID x 7/8” OD x 3/32” diameter or .674” ID x .103” diameter.
__________________
Stock 75 C10 step side.
350 2 BBL, 350 trans. 150K miles.
ron350 is offline   Reply With Quote
Old 07-18-2019, 03:37 PM   #8
GRADYS Performance
Registered User
 
GRADYS Performance's Avatar
 
Join Date: Dec 2013
Location: Columbus, Oh
Posts: 366
Re: Turbo 350 dipstick o-ring size?

The O-rings for a TH350 transmission are the same for the Vacuum Modulator and the 7/8" speedo sleeve, The Dipstick tube takes a Smaller o-ring than the other 2.

Quote:
Originally Posted by ron350 View Post
OK the o-ring for the dipstick tube, modulator valve and the small spedo housing are the same size.
Rockauto sells these under ATP SO33 and Pioneer #76200110.
.
The Parker o-ring book lists these as size –115 which measures 11/16” ID x 7/8” OD x 3/32” diameter or .674” ID x .103” diameter.
GRADYS Performance is offline   Reply With Quote
Old 07-21-2019, 10:27 AM   #9
ron350
Registered User
 
ron350's Avatar
 
Join Date: Apr 2007
Location: Birmingham AL
Posts: 250
Re: Turbo 350 dipstick o-ring size?

Thanks Gradys Performance I was just going by the ATP information.

When I get the dipstick tube out I will list the correct o-ring size.


http://atpautomotive.com/dipstick-tube-oring-seal-so-33
__________________
Stock 75 C10 step side.
350 2 BBL, 350 trans. 150K miles.
ron350 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com