NC 15x8 6 Lug Wheels Powder Coated for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

47thriftmaster · 09-05-2011, 04:47 PM

Hello all,
A little history behind this move first. A while back I was looking for 15x6 wheels, when PICKMUP showed me a set he had of 15x8's. I knew those were harder to find and thought they would work fine, I would have an easier time getting tires, and I had no luck finding 15x6. So, I bought them for $250 plus shipping, had them powder coated for $425. A little high for wheels but he did a great job on them and put 2 coats on as well. Back to the story, well a buddy of mine here just picked up a Blazer a week or two ago and it came with 15x6 wheels. He was going to junk them so I took them to use as rollers during my build. Well as I put them on the back, the front axle was pulled already, I started thinking they are what I really wanted. So my dilemma started, well after some thought I decided to see if these would sell, to help me decide. I am not asking what I have in them, but would like to get what it would cost me to coat the other set.

4 15x8 6 lug wheels for $500 plus shipping, here are some pics.

**special-K** · 09-06-2011, 06:17 AM

That's a good price considering what I've seen others sell for that still need blasting and powdercoat. Believe me,I have had about a dozen sets done over the years and these aren't as cheap as some would like to think.

47thriftmaster · 09-06-2011, 06:42 PM

Thanks. I figured pass on a good deal to someone else's project and help my project, rather then worry about what I paid. That's what make this hobby and forum so great.

**72 Super** · 09-06-2011, 09:28 PM

This is a very good deal for someone in my opinion.

Ray

**LUCKTRUCK** · 09-06-2011, 11:48 PM

what is the backspacing?

sdailey · 09-07-2011, 09:20 AM

Of course these pop up when I'm broke.

Plus, the fact that I have some 15 x 6 wheels that I won't be using. Oh well, maybe next time.

Heck of a deal on these. Good luck with the sale.

*mrdana60* · 09-07-2011, 12:13 PM

Quote:

Originally Posted by sdailey

Of course these pop up when I'm broke.

Plus, the fact that I have some 15 x 6 wheels that I won't be using. Oh well, maybe next time.

Heck of a deal on these. Good luck with the sale.

damn that is a sharp frame wished i could find one that clean

47thriftmaster · 09-08-2011, 06:18 PM

Just finished working 48hrs, will check that for you in a little bit or maybe the morning. Thanks

Quote:

Originally Posted by LUCKTRUCK

what is the backspacing?

47thriftmaster · 09-08-2011, 06:20 PM

Yah, that seems to be my luck quite often. Build is looking good.

Quote:

Originally Posted by sdailey

Of course these pop up when I'm broke.

Plus, the fact that I have some 15 x 6 wheels that I won't be using. Oh well, maybe next time.

**special-K** · 09-09-2011, 09:36 AM

These should be the normal backspace. Things were pretty standard back in the day.

71 super · 09-09-2011, 04:06 PM

Where are you at in nc- region? I am in wnc and interested. Any idea on shipping to 28716? lmk thanks Harold

GARYE · 09-09-2011, 04:07 PM

Nice rims and want to know the price of these.

47thriftmaster · 09-09-2011, 06:34 PM

Backspacing is the standard, 3 7/8". Did not get a chance to check shipping, just finished working. Thanks

Quote:

Originally Posted by LUCKTRUCK

what is the backspacing?

47thriftmaster · 09-09-2011, 06:37 PM

In Carthage, one hour south of raleigh and 2 hours east of charlotte. No need to ship, could meet halfway maybe, but will check tomorrow.

Quote:

Originally Posted by 71 super

Where are you at in nc- region? I am in wnc and interested. Any idea on shipping to 28716? lmk thanks Harold

47thriftmaster · 09-09-2011, 06:37 PM

The price is listed in the thread, $500 + shipping. Thanks

Quote:

Originally Posted by GARYE

Nice rims and want to know the price of these.

47thriftmaster · 09-10-2011, 06:23 PM

ttt

71 super · 09-10-2011, 10:46 PM

I will have to pass. Had some expenses that showed up last night sorry for any problems. Harold

47thriftmaster · 09-11-2011, 11:21 AM

No problems at all, good luck with the expenses I know how that can be. Thanks, Monte

Quote:

Originally Posted by 71 super

I will have to pass. Had some expenses that showed up last night sorry for any problems. Harold

chisler · 09-11-2011, 02:15 PM

Have to ask...shipping costs to Canada...V2P 1T8 and if not ttt for these nice rims!!!!!

47thriftmaster · 09-11-2011, 05:29 PM

Will try and check tomorrow at the UPS store.

47thriftmaster · 09-11-2011, 08:01 PM

Sold to jimmyballpeen, pending payment. Thank you to everyone and I will keep this updated if any changes.

rsmarr1982 · 01-21-2012, 01:28 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

joecaruso · 12-04-2014, 11:57 PM

Did you ultimately sell these wheels?

**NGN** · 12-06-2014, 08:15 AM

Just wondering if these rims can be used on disk and drum set up also with the smaller hub caps, like 67-68. Sure are nice looking rims
Thanks Nick

09-05-2011, 04:47 PM	#1
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	15x8 6 Lug Wheels Powder Coated for sale Hello all, A little history behind this move first. A while back I was looking for 15x6 wheels, when PICKMUP showed me a set he had of 15x8's. I knew those were harder to find and thought they would work fine, I would have an easier time getting tires, and I had no luck finding 15x6. So, I bought them for $250 plus shipping, had them powder coated for $425. A little high for wheels but he did a great job on them and put 2 coats on as well. Back to the story, well a buddy of mine here just picked up a Blazer a week or two ago and it came with 15x6 wheels. He was going to junk them so I took them to use as rollers during my build. Well as I put them on the back, the front axle was pulled already, I started thinking they are what I really wanted. So my dilemma started, well after some thought I decided to see if these would sell, to help me decide. I am not asking what I have in them, but would like to get what it would cost me to coat the other set. 4 15x8 6 lug wheels for $500 plus shipping, here are some pics.

09-06-2011, 06:17 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 15x8 6 Lug Wheels Powder Coated for sale That's a good price considering what I've seen others sell for that still need blasting and powdercoat. Believe me,I have had about a dozen sets done over the years and these aren't as cheap as some would like to think. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-06-2011, 06:42 PM	#3
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 15x8 6 Lug Wheels Powder Coated for sale Thanks. I figured pass on a good deal to someone else's project and help my project, rather then worry about what I paid. That's what make this hobby and forum so great.

09-06-2011, 09:28 PM	#4
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,678	Re: 15x8 6 Lug Wheels Powder Coated for sale This is a very good deal for someone in my opinion. Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

09-06-2011, 11:48 PM	#5
LUCKTRUCK Senior Member Join Date: May 2007 Location: new jersey Posts: 598	Re: 15x8 6 Lug Wheels Powder Coated for sale what is the backspacing? __________________ LUCKTRUCK

09-07-2011, 09:20 AM	#6
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: 15x8 6 Lug Wheels Powder Coated for sale Of course these pop up when I'm broke. Plus, the fact that I have some 15 x 6 wheels that I won't be using. Oh well, maybe next time. Heck of a deal on these. Good luck with the sale. __________________ Shannon

09-09-2011, 09:36 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 15x8 6 Lug Wheels Powder Coated for sale These should be the normal backspace. Things were pretty standard back in the day. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-09-2011, 04:06 PM	#11
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,078	Re: 15x8 6 Lug Wheels Powder Coated for sale Where are you at in nc- region? I am in wnc and interested. Any idea on shipping to 28716? lmk thanks Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

09-09-2011, 04:07 PM	#12
GARYE Registered User Join Date: Sep 2011 Location: USA Posts: 1	Re: 15x8 6 Lug Wheels Powder Coated for sale Nice rims and want to know the price of these. __________________ Free Flash Games

09-10-2011, 06:23 PM	#16
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 15x8 6 Lug Wheels Powder Coated for sale ttt

09-10-2011, 10:46 PM	#17
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,078	Re: 15x8 6 Lug Wheels Powder Coated for sale I will have to pass. Had some expenses that showed up last night sorry for any problems. Harold __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

09-11-2011, 02:15 PM	#19
chisler Registered User Join Date: May 2010 Location: Chilliwack British Columbia Canada Posts: 199	Re: 15x8 6 Lug Wheels Powder Coated for sale Have to ask...shipping costs to Canada...V2P 1T8 and if not ttt for these nice rims!!!!!

09-11-2011, 05:29 PM	#20
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 15x8 6 Lug Wheels Powder Coated for sale Will try and check tomorrow at the UPS store.

09-11-2011, 08:01 PM	#21
47thriftmaster Registered User Join Date: Sep 2010 Location: UP, Washington Posts: 978	Re: 15x8 6 Lug Wheels Powder Coated for sale Sold to jimmyballpeen, pending payment. Thank you to everyone and I will keep this updated if any changes.

01-21-2012, 01:28 PM	#22
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Re: 15x8 6 Lug Wheels Powder Coated for sale Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver) Last edited by leddzepp; 01-21-2012 at 01:57 PM. Reason: FS non subscriber



Register or Log In To remove these advertisements.

12-04-2014, 11:57 PM	#23
joecaruso Registered User Join Date: Sep 2014 Location: Gloucester Massachusetts Posts: 72	Re: 15x8 6 Lug Wheels Powder Coated for sale Did you ultimately sell these wheels?

12-06-2014, 08:15 AM	#24
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 815	Re: 15x8 6 Lug Wheels Powder Coated for sale Just wondering if these rims can be used on disk and drum set up also with the smaller hub caps, like 67-68. Sure are nice looking rims Thanks Nick

Register or Log In To remove these advertisements.