Jason's 70 Big Block SWB Project - Page 27 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeh · 03-28-2016, 08:40 PM

Quote:

Originally Posted by sduckworth13

Looks great Jason!

Thanks Scott, now I need to bend up some new lines to!!!

sduckworth13 · 03-28-2016, 08:44 PM

Quote:

Originally Posted by jeh

Thanks Scott, now I need to bend up some new lines to!!!

I used the new copper looking lines. They bend up pretty easy.

jeh · 03-28-2016, 08:55 PM

I'll probably go with stainless lines, my buddy got pretty good with all the hotrods he has done the last couple years. He's going to bring his bender over one afternoon and we can get them done

sduckworth13 · 03-28-2016, 08:59 PM

Cool deal.

**Vic1947** · 03-28-2016, 10:16 PM

Looks very nice, Jason, although a bit lonely without the chubby block.

jlsanborn · 03-28-2016, 10:29 PM

Nice! I'll vouch for John's work as well. He's local and I've met him a couple times. I got a hydraulic clutch setup from him and it too was top-notch. Please share your upcoming plumbing adventure with us!

mcbassin · 03-29-2016, 08:34 AM

Very clean looking booster set up! Nice!

jeh · 03-29-2016, 06:32 PM

[quote=Vic1947;7538996]Looks very nice, Jason, although a bit lonely without the chubby block.

[/QUOT
Thanks Vic, the ole chubby block is going back in just waiting on the machine shop to balance

Quote:

Originally Posted by jlsanborn

Nice! I'll vouch for John's work as well. He's local and I've met him a couple times. I got a hydraulic clutch setup from him and it too was top-notch. Please share your upcoming plumbing adventure with us!

Thanks, I'm going to try to run the lines neat and clean towards the firewall, I post up some pics as I go.

Quote:

Originally Posted by mcbassin

Very clean looking booster set up! Nice!

Thanks Mike, have you had old red out cruising any during these nice days???

mcbassin · 03-30-2016, 11:14 AM

Quote:

Originally Posted by jeh

Thanks Mike, have you had old red out cruising any during these nice days???

I have been driving my truck every chance I get. I have almost 2500 miles on it now

jeh · 03-30-2016, 06:30 PM

Quote:

Originally Posted by mcbassin

I have been driving my truck every chance I get. I have almost 2500 miles on it now

I'm happy to see you getting to enjoy it after all the hard work and effort you've put in to it

Bennett68C10 · 03-30-2016, 07:47 PM

Looks great Jason, I really like the looks of those Wilwood master cylinders!

jeh · 03-30-2016, 08:43 PM

Quote:

Originally Posted by Bennett68C10

Looks great Jason, I really like the looks of those Wilwood master cylinders!

Thanks Keith, when I get this thing back up and running again I hope to do some Wilwood big brakes on it. I figured while I had the CPP booster/master cylinder off to pull the engine I would go ahead and upgrade to the Wilwood setup. The booster I had on there was so big and stuck out from the firewall it was only about an inch from the valve cover. This is another one of those things that I hate to buy twice but I'm happy with the setup now!!!

jeh · 04-18-2016, 05:29 PM

I bought an expansion module for my Dakota VHX dash so I could add the transmission temperature. Just want to let any of you guys know that have any of these "brain" boxes to be careful when plugging in the Aux port. As soon as I plugged mine in it broke, so i have been labeling wires to get it unhooked and sent back to Dakota for repair. I called them and they said it wouldn't be a problem to fix.

jeh · 04-18-2016, 05:35 PM

I also bent up some hard lines for the transmission cooler this weekend. I will put a section of braided stainless at the transmission for some flex also.

**Vic1947** · 04-18-2016, 06:55 PM

Quote:

Originally Posted by jeh

I also bent up some hard lines for the transmission cooler this weekend. I will put a section of braided stainless at the transmission for some flex also.

Sweeeeet!

jeh · 04-18-2016, 07:12 PM

Quote:

Originally Posted by Vic1947

Sweeeeet!

Thanks Vic, after I looked at the picture it looks like the line to the top is crooked

I may have to do some tweaking!!!!

jeh · 05-02-2016, 09:03 PM

I finally have some good news and a little update on the ole truck. I got the motor back from the machine shop this morning and they said there very happy with how the block and crank turned out

While I was there I had them install the new cam bearings also. I dropped it off at my buddies shop this evening so he should start reassembly this week, I still need to order a few things for him to get the bottom end buttoned up. Then while I was in the garage this evening the brown truck showed up with my box back from Dakota Digital, they fixed it and didn't charge me anything, defiantly a thumbs up for them!!!!

Bennett68C10 · 05-03-2016, 08:13 AM

That's awesome news Jason, can't wait to see that big block back in there!

jeh · 05-03-2016, 06:43 PM

Quote:

Originally Posted by Bennett68C10

That's awesome news Jason, can't wait to see that big block back in there!

Thanks man, I'm excited "again"

**RRR18** · 05-03-2016, 08:05 PM

Sucks about the Dakota setup break. Glad to hear they didn't give ya any problems.

jeh · 05-03-2016, 09:17 PM

Quote:

Originally Posted by RRR18

Sucks about the Dakota setup break. Glad to hear they didn't give ya any problems.

I called them and discussed what happened and they said just send it back and they'd take care of it. To me that kind of customer service means a lot now days.

mcbassin · 05-04-2016, 08:25 AM

Good news about the big block! Nice work bending up the hard lines too.

jeh · 05-04-2016, 06:43 PM

Quote:

Originally Posted by mcbassin

Good news about the big block! Nice work bending up the hard lines too.

Thanks Mike

Farm Shop · 05-06-2016, 08:39 AM

Amazing build. Hate to see the issues you've had along the way, but it'll be worth it... especially with that healthy BBC!

NoNeck · 05-06-2016, 03:37 PM

Nice work, Jason. Everything is coming together. I'm glad you didn't give up on the Big Block.

POP

03-28-2016, 08:55 PM	#653
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Jason's 70 Big Block SWB Project I'll probably go with stainless lines, my buddy got pretty good with all the hotrods he has done the last couple years. He's going to bring his bender over one afternoon and we can get them done __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

03-28-2016, 08:59 PM	#654
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Jason's 70 Big Block SWB Project Cool deal. __________________ Scott

03-28-2016, 10:16 PM	#655
Vic1947 Senior Member Join Date: Mar 2012 Location: Kansas City, MO Posts: 1,993	Re: Jason's 70 Big Block SWB Project Looks very nice, Jason, although a bit lonely without the chubby block. __________________ Victor 57 Chevy Wagon - California Dreamin'"Mecum'd" 9/2022 Dallas, TX Crusty Rusty Leaky Squeaky 67 Consigned 4/2019 Dresden, Germany Maybelline - my '57 Ford 2dr Sedan "Mecum'd" 3/2016 Location unknown Silver Streaker "Mecum'd" 4/2013 Somewhere in Texas

03-28-2016, 10:29 PM	#656
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,367	Re: Jason's 70 Big Block SWB Project Nice! I'll vouch for John's work as well. He's local and I've met him a couple times. I got a hydraulic clutch setup from him and it too was top-notch. Please share your upcoming plumbing adventure with us! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

03-29-2016, 08:34 AM	#657
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Jason's 70 Big Block SWB Project Very clean looking booster set up! Nice! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-30-2016, 07:47 PM	#661
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Jason's 70 Big Block SWB Project Looks great Jason, I really like the looks of those Wilwood master cylinders! __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

04-18-2016, 05:29 PM	#663
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Jason's 70 Big Block SWB Project I bought an expansion module for my Dakota VHX dash so I could add the transmission temperature. Just want to let any of you guys know that have any of these "brain" boxes to be careful when plugging in the Aux port. As soon as I plugged mine in it broke, so i have been labeling wires to get it unhooked and sent back to Dakota for repair. I called them and they said it wouldn't be a problem to fix. Attached Images __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

04-18-2016, 05:35 PM	#664
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Jason's 70 Big Block SWB Project I also bent up some hard lines for the transmission cooler this weekend. I will put a section of braided stainless at the transmission for some flex also. Attached Images __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

05-02-2016, 09:03 PM	#667
jeh Registered User Join Date: Jul 2011 Location: sutton WV Posts: 1,822	Re: Jason's 70 Big Block SWB Project I finally have some good news and a little update on the ole truck. I got the motor back from the machine shop this morning and they said there very happy with how the block and crank turned out While I was there I had them install the new cam bearings also. I dropped it off at my buddies shop this evening so he should start reassembly this week, I still need to order a few things for him to get the bottom end buttoned up. Then while I was in the garage this evening the brown truck showed up with my box back from Dakota Digital, they fixed it and didn't charge me anything, defiantly a thumbs up for them!!!! __________________ Jason '70 C-10 short fleet 427BB TH400 (SOLD) '10 Ford F 350 '13 Ford RAPTOR 6.2 MY BUILD THREAD http://www.67-72chevytrucks.com/vboa...d.php?t=612623

05-03-2016, 08:13 AM	#668
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Jason's 70 Big Block SWB Project That's awesome news Jason, can't wait to see that big block back in there! __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-03-2016, 08:05 PM	#670
RRR18 Senior Member Join Date: Nov 2010 Location: Lordstown, OH / Wentzville, MO Posts: 870	Re: Jason's 70 Big Block SWB Project Sucks about the Dakota setup break. Glad to hear they didn't give ya any problems. __________________ '67 BAD IDEA Follow on Instagram https://www.instagram.com/rtimes3c10/ Ryan

05-04-2016, 08:25 AM	#672
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Jason's 70 Big Block SWB Project Good news about the big block! Nice work bending up the hard lines too. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-06-2016, 08:39 AM	#674
Farm Shop Registered User Join Date: Jan 2013 Location: Deer Creek, IL Posts: 145	Re: Jason's 70 Big Block SWB Project Amazing build. Hate to see the issues you've had along the way, but it'll be worth it... especially with that healthy BBC! __________________ 1970 SWB 2wd C10, Vortec 454/80e, CPP 3/5, slotted mags, patina 1972 K20 Super Cheyenne, Short bed, EFI 396, NV4500, NP208 1970 GTO Judge, heads/cam LS1 & stalled 4L60e

05-06-2016, 03:37 PM	#675
NoNeck Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 1,106	Re: Jason's 70 Big Block SWB Project Nice work, Jason. Everything is coming together. I'm glad you didn't give up on the Big Block. POP __________________ 2016 RAM Laramie HEMI 1966 Fairlane GT/A, 390/335 HP If it costs you a dollar to make a friend, KEEP THE DOLLAR. If it costs you a friend to make a dollar, KEEP THE FRIEND.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.