rear light wiring diagram... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alexis · 01-20-2003, 08:01 PM

any one got a picture of them of what color wire does what......my left rear light doesnt go on when you turn the blinker or hit the brakes, only when the parking brake it on. any help would be great. Oh the front turn signals work and so does the right rear light. thanks

**68 Stepside** · 01-20-2003, 08:09 PM

check the obvious things first Al, the bulb, the connector, and how about your turn signal switch? My panel's left rear light would only work if you had the turn signal "wand" in one particular spot. Just throwing out a few ideas for you.

Alexis · 01-20-2003, 08:38 PM

Quote:

Originally posted by 68 Stepside
check the obvious things first Al, the bulb, the connector, and how about your turn signal switch? My panel's left rear light would only work if you had the turn signal "wand" in one particular spot. Just throwing out a few ideas for you.

i switched the buld to make sure.....everthing seems cool, except for the hack job some did on the rear wires..ghetto rigged.....so i wanna clean it up. reason why i'm asking for what color is for what.

i really need to buy a real good tester that doesnt brake.......

**john** · 01-20-2003, 09:02 PM

http://www.geocities.com/chevroletc1070/wiringdias.html

our64 · 01-20-2003, 09:05 PM

Should go like this....Brown is for the running lights Left and Right, may be brown with a yellow stripe for left and brown with a green stripe for right running....Green is your right turn signal and brake....tellow is your left turn and brake..Good luck. Yous hould have a connection / plug at the firewall and at the end of the frame if you want to unpulg them to isolate yoyr problem. As mentioned if its not in the wiring its likely your turn signal switch if ist your brake/signal light as they both go throught the switch..Running lights do not

01-20-2003, 08:01 PM	#1
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	rear light wiring diagram... any one got a picture of them of what color wire does what......my left rear light doesnt go on when you turn the blinker or hit the brakes, only when the parking brake it on. any help would be great. Oh the front turn signals work and so does the right rear light. thanks

01-20-2003, 08:09 PM	#2
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	check the obvious things first Al, the bulb, the connector, and how about your turn signal switch? My panel's left rear light would only work if you had the turn signal "wand" in one particular spot. Just throwing out a few ideas for you. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

01-20-2003, 09:02 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	http://www.geocities.com/chevroletc1070/wiringdias.html __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

01-20-2003, 09:05 PM	#5
our64 http://public.fotki.com/street Join Date: Nov 2002 Location: Winnipeg, Canada Posts: 169	Should go like this....Brown is for the running lights Left and Right, may be brown with a yellow stripe for left and brown with a green stripe for right running....Green is your right turn signal and brake....tellow is your left turn and brake..Good luck. Yous hould have a connection / plug at the firewall and at the end of the frame if you want to unpulg them to isolate yoyr problem. As mentioned if its not in the wiring its likely your turn signal switch if ist your brake/signal light as they both go throught the switch..Running lights do not



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.