Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-28-2014, 12:49 AM | #1 |
Registered User
Join Date: Jul 2012
Location: Maple Ridge. B.C.
Posts: 145
|
Re: What did you do to your truck today? Chapter II
The aircraft stripper I used worked pretty good. I roughed up the paint with 40 grit just to open up the paint to let the stripper soak in. I had about three coats of old paint on. So it took a coat of stripper for each coat of old paint. Once I scrapped off as much as I could I used 80 grit to remove the rest. Like the previous post said, be careful with it. It will eat through light latex gloves, your clothes et,. were goggles, use in well ventilated area and/or use a respirator.
|
01-28-2014, 08:54 AM | #2 | |
Dan Johnston
Join Date: Sep 2010
Location: Winfield, Ks.
Posts: 4,162
|
Re: What did you do to your truck today? Chapter II
Quote:
|
|
01-28-2014, 09:33 AM | #3 |
Registered User
Join Date: Jul 2012
Location: Maple Ridge. B.C.
Posts: 145
|
Re: What did you do to your truck today? Chapter II
I looked into getting it blasted. There's a company not too faraway that does it. I was quotes about $125 to $150 a panel. So it would add up pretty quick.
|
01-28-2014, 09:36 AM | #4 |
Dan Johnston
Join Date: Sep 2010
Location: Winfield, Ks.
Posts: 4,162
|
Re: What did you do to your truck today? Chapter II
Typically if you do it all at one time they will cut the deal... I was quoted 125 for fenders and grill and 150 for the hood but they did all 4 pieces for 300...
|
01-28-2014, 12:43 PM | #5 |
Registered User
Join Date: Sep 2012
Location: Spring, Tx.
Posts: 479
|
Re: What did you do to your truck today? Chapter II
I dont think there is a media blaster around the spring tx area where I live or I would, plus the whole truck has to be strippd and I think by using a little elbow grease I should be able to do it myself. Although sure would be easier to have it blasted, as well as cleaner!
|
01-28-2014, 12:43 PM | #6 | |
Registered User
Join Date: Sep 2012
Location: Spring, Tx.
Posts: 479
|
Re: What did you do to your truck today? Chapter II
Quote:
|
|
01-28-2014, 01:53 PM | #7 |
Registered User
Join Date: Sep 2002
Location: Austin, Texas
Posts: 1,048
|
Re: What did you do to your truck today? Chapter II
New u-joints and carrier bearing. Should have bought a puller($30)...local brake shop pulled it off and stripped out my threads...now I know why they didn't charge me. $65 later at Scottys Driveshaft fixed the problem...they are the best.
Whooped my butt for awhile...as always the search button was most helpful.
__________________
72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives) |
Bookmarks |
|
|