Ridetech 4-Link Coil-Over Install

[SKT]

.

Great kit!

.

[PunishedC10]

Originally Posted by Hammered 77

John, will a suburban/blazer gas tank fit behind the sway bar/pan hard bar?
Thanks
Rick

I'm probably going to find this out pretty soon. I'm running a 31 gallon tank
And I hope to order the front coilover setup on Monday!

[1957 Chief]

Originally Posted by PunishedC10

I'm probably going to find this out pretty soon. I'm running a 31 gallon tank
And I hope to order the front coilover setup on Monday!

The gas tank issue will be good to know.

Bubba

[N2TRUX]

Originally Posted by Hammered 77

John, will a suburban/blazer gas tank fit behind the sway bar/pan hard bar?
Thanks Rick

It might, but why? If you want I can measure since my bed is still off.

[JohnJ@RideTech]

Originally Posted by Hammered 77

John, will a suburban/blazer gas tank fit behind the sway bar/pan hard bar?
Thanks
Rick

I am not 100% for sure. Do you have one you could take some measurements off of, maybe even some measurements in relation to your frame? Id be more than happy to compare your measurements to our truck to see what I can come up with.

[JohnJ@RideTech]

Originally Posted by PunishedC10

I'm probably going to find this out pretty soon. I'm running a 31 gallon tank
And I hope to order the front coilover setup on Monday!

Give me a shout direct and I can get one on its way.
812-481-4737
Thanks!

[Hammered 77]

Originally Posted by N2TRUX

It might, but why? If you want I can measure since my bed is still off.

I'm planning on moving the gas tank to the back, but it's not something that has to be done.

[phillipm]

John, in the installed photos of the front frame tubular gusset kit it also shows a bar going straight from frame rail to frame rail with a pair of rod ends. Is that included in the kit? I don't see it pictured on the sales site. I just see the angled bars pictured. Thanks.
Phillip

[JohnJ@RideTech]

Originally Posted by phillipm

John, in the installed photos of the front frame tubular gusset kit it also shows a bar going straight from frame rail to frame rail with a pair of rod ends. Is that included in the kit? I don't see it pictured on the sales site. I just see the angled bars pictured. Thanks.
Phillip

That was a prototype piece and will not be included with future kits. The triangulated pieces provide ample enough support. I apologize for not mentioning that above.

[JohnJ@RideTech]

If any of you guys can email or PM pictures to me of the gas tanks that would be great.

[N2TRUX]

Originally Posted by JohnJ@RideTech

If any of you guys can email or PM pictures to me of the gas tanks that would be great.

Measurements would be excellent. I still have the bed off of Scarlett

[Hammered 77]

The 25 gal tank is 28 3/4 x 28 1/8 x 10 3/4. The 31 gal is 12 3/4 deep.

[82streetshow]

i will throw my ricks tank under a truck at work and get some pics for reference but i know its much smaller than the blazer/suburban tank

[JohnJ@RideTech]

Originally Posted by 82streetshow

i will throw my ricks tank under a truck at work and get some pics for reference but i know its much smaller than the blazer/suburban tank

Awesome man, I sure do appreciate it!

[bgray]

Any plans to have a kit for the rear of blazers?

[cruizin01]

Any comparisons between the old and new? The new kit is beyond my price range but I'm still curious. Any details on the old stuff being sold/given away yet?

[JohnJ@RideTech]

Originally Posted by bgray

Any plans to have a kit for the rear of blazers?

Not as of yet. I would personally like to see how easy it would be to adapt our kit to a Blazer.

[JohnJ@RideTech]

Originally Posted by cruizin01

Any comparisons between the old and new? The new kit is beyond my price range but I'm still curious. Any details on the old stuff being sold/given away yet?

This is our first ever complete coilover kit for the Squarebody.
While the performance and handling are drastically improved over the OE components with the StreetGrip kit, the new coilover kit was designed for those who really wanted to take the performance of their truck to a completely different level.
This kit was designed for performance track and heavy duty street use. Whether it be on an autocross track, a road course or the drag strip, the coilover kit was designed to take whatever you'd like to throw at it..and it does it all without you having to listen to your significant other complain about the ride quality.

[JohnJ@RideTech]

--In Stock and Ready to Rock--

[bgray]

Originally Posted by JohnJ@RideTech

Not as of yet. I would personally like to see how easy it would be to adapt our kit to a Blazer.

Everything should work fine, minus the Notch setup and bar lengths as the leafs are different. Id really like to see a setup like that, id be your first customer!

[JohnJ@RideTech]

WHO WANTS FREE SHIPPING??

Mention that you saw the build thread on this forum and I will ship it anywhere in the continental U.S FOR FREE!






!!FORUM SPECIAL ONLY!!
Any members of the forum who want to purchase one of the new kits will also receive one of the shirts below with their order..also at no charge.
I appreciate your guys feedback and patience as we worked through the development and installation of this kit.
We believe that our customers are going to be impressed with the performance and ease of installation that comes along with any Ridetech kit.
Thank you for your support!

[1957 Chief]

John, you got an email brother.

Bubba

[Rickysnickers]

This makes me want to buy a Sq. body

[JohnJ@RideTech]

Originally Posted by Rickysnickers

This makes me want to buy a Sq. body

Amen to that! Find two and Ill get another one!..lol

[JohnJ@RideTech]

I promise I haven't forgotten about you guys. Still trying to verify some measurements of the Blazer tank.