1959 GMC 9310 Canadian built Shortbox Fleetside Deluxe

[Scottish58chev]

That’s going to be an awesome looking truck.

[Iplumb]

Very Nice!

[Foot Stomper]

Stainless trim is being installed, radio, heater and vent controls too!
Engine wiring and fuel line are coming along nicely also.
Ken has been busting his arse on this truck and I know he's doing a great job!

[northerngmc]

Originally Posted by Foot Stomper

Stainless trim is being installed, radio, heater and vent controls too!
Engine wiring and fuel line are coming along nicely also.
Ken has been busting his arse on this truck and I know he's doing a great job!

Looking great, deluxe heater and a radio!

Do you have a tach or clock for the dash?

[Foot Stomper]

Originally Posted by northerngmc

Looking great, deluxe heater and a radio!

Do you have a tach or clock for the dash?

Thanks.
The delete has always been there but I did find a clock for it so that will end up there instead of the delete.

[Foot Stomper]

Cokers, rims and new hub caps are now installed.
The new engine ran like crap with the old style yellow spark plug wires so new black ones fixed that problem! "Runs like a top!"
For the very first time, Ken dropped into low gear and it moved under it's own power! Reverse worked just a nicely too! Yahoo!!!!

[Foot Stomper]

Tires turning down the road... first cruise!!

[Strider]

Originally Posted by Foot Stomper

Tires turning down the road... first cruise!!

Footstomper,

Love your build! Beautiful truck. Same colour as my 67 C10.

What gas tank do you have there?

[Foot Stomper]

Originally Posted by Strider

Footstomper,

Love your build! Beautiful truck. Same colour as my 67 C10.

What gas tank do you have there?

Thanks Strider. Great color choice.

The tank is a late 60's Mustang.

[Strider]

Originally Posted by Foot Stomper

Thanks Strider. Great color choice.

The tank is a late 60's Mustang.

Where did you buy it from? Did you remove the rear crossmember or was it already installed? Any issues with having no cross member between the lead spring shackles?

Man that is a beautiful job you did!
Posted via Mobile Device

[Foot Stomper]

Originally Posted by Strider

Where did you buy it from? Did you remove the rear crossmember or was it already installed? Any issues with having no cross member between the lead spring shackles?

Man that is a beautiful job you did!
Posted via Mobile Device

I actually bought the tank from my local NAPA store. One small cross member comes out and is discarded. No issues with that in the least.

[Kim57]

Looking very nice.
Kim

[dsraven]

I assume there is no seat, he's sitting pretty tall in the saddle, haha
looks great.
check kijiji if you're interested in some 1959 plates to hang on there. was a set there yesterday

[Foot Stomper]

Originally Posted by dsraven

I assume there is no seat, he's sitting pretty tall in the saddle, haha
looks great.
check kijiji if you're interested in some 1959 plates to hang on there. was a set there yesterday

Yup... Ken sits tall...especially on two Coke crates! haha
Thanks for the tip on the 59 plates but I have one already.

[dsraven]

looking good,all red and white. gonna be cool driving around this summer.

[Foot Stomper]

So this past week I drove 500 miles to work on the truck with Ken for a few days. We got lots done!
I spent a few hours working on repairing the steering wheel cracks with Fusor 100EZ and a dremel.

I Vee'd out all the cracks with my Dremel tool and the bit shown in the picture below. It worked perfectly and I would highly recommend this tool for this job!

Fusor 100EZ is a beautiful plastic bonding material that has a 40 minute work time. Because of the long working time, I was able to only use one static mixer by squeezing out a tiny bit of adhesive at a time onto some masking paper and used my gloved finger to smear and push it into the grooved out cracks. I used the static mixer to mix the product as per manufacturer's instructions. I kept applying product as it started to set up as it sunk into the cracks. I made sure I had built up enough product to be sure that when I sanded and Dremelled the excess material off, I could smooth over the cracks and not have any low spots.

I turned out real nice!

[Foot Stomper]

Headliner material was installed by the upholstery professional. Not shown in the pictures, but plenty used, was the special headliner spray adhesive. I wouldn't dream of attempting this job and plenty of extra hands are very helpful.

[Foot Stomper]

Ken and I F'd with the back window and got it in with a lot of soap, grunt and swear words! Not an easy job but we persisted! The lock strip tool was a huge help and made the job possible... I can't imagine putting it in without it!

[Foot Stomper]

Door glass went in too! I had worked on a 55 Cameo last summer where I replaced the broken windows but was a little rusty about the steps to putting everything back in... but the steps are first to drop in the vent window but not screw it into place, then drop in the roll up window, then get the roll up in the tracks and then you can screw in the vent window.

[Foot Stomper]

Dash cluster installation went pretty good. The new dash plates installed easily but the oil pressure line is a little too short so that challenged us a little. All in all, it went in nicely.

[Foot Stomper]

The passenger door got installed along with the front fenders. Really starting to take shape now!!

[Foot Stomper]

Filler panel and left front fender were next. The filler panel was a donor from a Chevrolet so we had to drill 4 holes to accommodate the GMC grill. Put the headlights in and plugged them in to test the wiring... success!

[Foot Stomper]

NOS park lights installed in the grill and are ready to install on the truck along with the re-chromed 9310 emblem.

[Foot Stomper]

After drilling the 4 extra holes, the grill mounted without any challenges except for a 2 hour f'n around challenge with what we thought was a wiring issue but turned out to be a faulty 1157 bulb!!! ARRRGGGHHH
The hood got installed as well. Still some adjustments to be made at this point.

[Foot Stomper]

The new repop bumper and chrome headlight bezel fitment was really good!