[Project] "Fnlow69" PART II - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FnLow69 · 01-23-2008, 01:19 PM

yes nathan is making the dropmember to fit the tube frame, ya the frame was i learning experiance never would have though i could do it. More progress next weekend....

SchreinerM · 01-24-2008, 03:21 AM

I am absolutely jealous. If I recall from your first thread you are a few years younger than me (25 here), and already have built a frame like I've wanted to for years.

Never doubt yourself. You obviously have the skills to do this.

98L150 · 01-24-2008, 03:45 AM

looks good

subscribing to thread now

BACKYARD88 · 01-24-2008, 08:18 AM

Looking good!

FnLow69 · 01-24-2008, 03:35 PM

Quote:

Originally Posted by SchreinerM

I am absolutely jealous. If I recall from your first thread you are a few years younger than me (25 here), and already have built a frame like I've wanted to for years.

Never doubt yourself. You obviously have the skills to do this.

Thanks, ya im only 22. you should do it, it easyier than i thought as long as you plan it out good.

abadsvt · 01-24-2008, 03:43 PM

Quote:

Originally Posted by FnLow69

Thanks, ya im only 22. you should do it, it easyier than i thought as long as you plan it out good.

Your only 22!!!!!!!!!! I wish i started doing these trucks when i was 22. You got a hell of a good start. I thought i was on the younger side being 26 but your making me look bad

When are you getting your dropmember? Talk to you soon.

Josh

FnLow69 · 01-25-2008, 12:50 AM

LOL, its on order probly, couple weeks.

Where your update, we need more pictures josh!

Angelse68cal · 01-29-2008, 09:30 AM

Nice work keep the new Ideas comin

LMDGUY · 01-30-2008, 06:12 AM

nice work!

FnLow69 · 01-30-2008, 01:56 PM

Well time for another update...........
Since i liked the first rear crossmember, i decide to do another one. even tough it took 4 hour to make. Also made and tacked on the core support mounts.

Crossmember.....

And core support mounts.....(not the best pic)

Should have my 4 link parts in tommorrow. Plan is to have the frame done by the last week in february. Well shall see!

Justin

PBFAB.COM · 01-30-2008, 02:36 PM

I dig the crossmembers... just be careful, you may make a whole lot of work for yourself... now everything will have to have cool speed holes to match!

FnLow69 · 01-30-2008, 03:04 PM

very true and i have some ideas...LOL

nothing over the top, so will have to see.

Rokcrln · 01-30-2008, 08:39 PM

Look'n Good!

Kevin
LFD Inc.

SchreinerM · 01-31-2008, 03:12 AM

I'm surprised you fully welded the crossmembers in. I'd be nervous to do that until later in the build. Then again I'd be nervous to even start a frame from scratch.

Crossmembers look awesome!

FnLow69 · 01-31-2008, 02:04 PM

there in the same spot as the ones on the other frame so they should work. I hope? lol

FnLow69 · 02-05-2008, 05:15 AM

UPDATE 2/3/08
Well i got the cab mounts on, there not done and there will be gussets as soon as I mock the cab up to make sure there all good. Anyways here's the pictures...........

Front cab mount

Rear cab mount

ProjectDD · 02-05-2008, 05:37 AM

Nice work, will be watching this thread.

Rokcrln · 02-05-2008, 08:11 AM

I just love the look of a custom frame! Even more when it is done right

Kevin
LFD Inc.

Angelse68cal · 02-06-2008, 05:45 AM

Good work keep the docs. Comin

nhtc33d · 02-06-2008, 09:07 AM

Man, I wish you were my neighbor! That is some beautiful work going there.
How do you like your hobart welder? Is it a 187?

FnLow69 · 02-06-2008, 12:53 PM

Thanks guys.
More updates soon as i waiting for my lower 4-link bars to get here

PBFAB.COM · 02-10-2008, 12:23 PM

This should help you make some progress!!!!

The man in the big brown truck picked it up this afternoon...

FnLow69 · 02-10-2008, 12:31 PM

Sweet I think that will help with the progress, looks way cool nathan. cant wait to get it. i also got my four link parts in earlier this week.

Scott Webster · 02-23-2008, 04:18 AM

Man that is some awesome work!!!

IvelDesigns · 02-23-2008, 06:45 AM

Tivo activated!

01-23-2008, 01:19 PM	#26
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II yes nathan is making the dropmember to fit the tube frame, ya the frame was i learning experiance never would have though i could do it. More progress next weekend.... __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

01-24-2008, 03:21 AM	#27
SchreinerM Registered User Join Date: Oct 2006 Location: Oshkosh, WI Posts: 101	Re: [Project] "Fnlow69" PART II I am absolutely jealous. If I recall from your first thread you are a few years younger than me (25 here), and already have built a frame like I've wanted to for years. Never doubt yourself. You obviously have the skills to do this.

01-24-2008, 03:45 AM	#28
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: [Project] "Fnlow69" PART II looks good subscribing to thread now __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915

01-24-2008, 08:18 AM	#29
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: [Project] "Fnlow69" PART II Looking good! __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

01-25-2008, 12:50 AM	#32
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II LOL, its on order probly, couple weeks. Where your update, we need more pictures josh! __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 01-25-2008 at 12:51 AM.

01-29-2008, 09:30 AM	#33
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: [Project] "Fnlow69" PART II Nice work keep the new Ideas comin

01-30-2008, 06:12 AM	#34
LMDGUY Registered User Join Date: Jan 2008 Location: Phx,AZ Posts: 352	Re: [Project] "Fnlow69" PART II nice work! __________________ 1973 C10 "Chain Reaction" Street Trucks cover Feb 2012 2013 Silverado 1964 Cadillac

01-30-2008, 01:56 PM	#35
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II Well time for another update........... Since i liked the first rear crossmember, i decide to do another one. even tough it took 4 hour to make. Also made and tacked on the core support mounts. Crossmember..... And core support mounts.....(not the best pic) Should have my 4 link parts in tommorrow. Plan is to have the frame done by the last week in february. Well shall see! Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 01-30-2008 at 01:57 PM.

01-30-2008, 02:36 PM	#36
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: [Project] "Fnlow69" PART II I dig the crossmembers... just be careful, you may make a whole lot of work for yourself... now everything will have to have cool speed holes to match! __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-30-2008, 03:04 PM	#37
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II very true and i have some ideas...LOL nothing over the top, so will have to see. __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

01-30-2008, 08:39 PM	#38
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: [Project] "Fnlow69" PART II Look'n Good! Kevin LFD Inc.

01-31-2008, 03:12 AM	#39
SchreinerM Registered User Join Date: Oct 2006 Location: Oshkosh, WI Posts: 101	Re: [Project] "Fnlow69" PART II I'm surprised you fully welded the crossmembers in. I'd be nervous to do that until later in the build. Then again I'd be nervous to even start a frame from scratch. Crossmembers look awesome!

01-31-2008, 02:04 PM	#40
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II there in the same spot as the ones on the other frame so they should work. I hope? lol __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-05-2008, 05:15 AM	#41
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II UPDATE 2/3/08 Well i got the cab mounts on, there not done and there will be gussets as soon as I mock the cab up to make sure there all good. Anyways here's the pictures........... Front cab mount Rear cab mount __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-05-2008, 05:37 AM	#42
ProjectDD Registered User Join Date: Jan 2008 Location: Airville, PA Posts: 19	Re: [Project] "Fnlow69" PART II Nice work, will be watching this thread.



Register or Log In To remove these advertisements.

02-05-2008, 08:11 AM	#43
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: [Project] "Fnlow69" PART II I just love the look of a custom frame! Even more when it is done right Kevin LFD Inc.

02-06-2008, 05:45 AM	#44
Angelse68cal Cochino_Racing_909 Join Date: Oct 2006 Location: California Posts: 280	Re: [Project] "Fnlow69" PART II Good work keep the docs. Comin

02-06-2008, 09:07 AM	#45
nhtc33d Registered User Join Date: Dec 2007 Location: PA Posts: 326	Re: [Project] "Fnlow69" PART II Man, I wish you were my neighbor! That is some beautiful work going there. How do you like your hobart welder? Is it a 187?

02-06-2008, 12:53 PM	#46
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II Thanks guys. More updates soon as i waiting for my lower 4-link bars to get here __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

02-10-2008, 12:23 PM	#47
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: [Project] "Fnlow69" PART II This should help you make some progress!!!! The man in the big brown truck picked it up this afternoon... Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

02-10-2008, 12:31 PM	#48
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II Sweet I think that will help with the progress, looks way cool nathan. cant wait to get it. i also got my four link parts in earlier this week. __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 02-10-2008 at 12:33 PM.

02-23-2008, 04:18 AM	#49
Scott Webster Sheetmetal Psycho Join Date: May 2005 Location: athens PA Posts: 515	Re: [Project] "Fnlow69" PART II Man that is some awesome work!!! __________________ I didn't say you were stupid, but I was thinking it... I need a check up from the neck up! Project "Rigginstine's Monster" 1971 C-10 longbed 355/4spd Future mods: 67 front clip Webby's Rigginations - where everything has potential!

02-23-2008, 06:45 AM	#50
IvelDesigns Commander Taco Bello Join Date: Sep 2006 Location: Des Moines, Iowa Posts: 2,232	Re: [Project] "Fnlow69" PART II Tivo activated! __________________ Bagged '50 3600 - Bumper punchin' road kill since 2009... Bagged '69 C10 Longbed - Bumper punchin' road kill since 2007...

Register or Log In To remove these advertisements.