need help with wires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Rat · 06-13-2004, 09:02 PM

i took apart my trucks wiring harness because it is all beat up. so i got an ez wire kits because i couldnt see paying what they want for a painless harness. so my problem is i took it apart around mon. and now it's sun and i cant figure were one connector goes.... i did the engine compartment first and now i am in the cab.... the connector has 4 wires coming out of it... a light green a dark green a yellow and a brown.... i cant figure out were it went.... i checked all the places i remember disconnecting wires but couldnt find anything that looked like it would fit this connector. if someone could help me that would be great!!!!!

Any help would be great

Thanks Rat

jostrans68 · 06-13-2004, 09:24 PM

can you post a pic of the connector? might reconize it ?

jef5150 · 06-13-2004, 09:38 PM

im pretty sure those go to the rear of the truck for tail lights/brake lights ((round connector))it should plug into the fire wall and run down the frame rail,,then there should be another shorter harness that plugs into the one on the frame rail and connects to the tail lights..... heres a link to all wiring diagrams http://www.geocities.com/chevroletc1070/wiringdias.html jeff

cdowns · 06-13-2004, 09:39 PM

that's normally the harness that goes to the back lights of the truck

71Rat · 06-13-2004, 09:43 PM

i think jef5150 hit it on the head... it's the firwall connector to those lights... wow i love this board!!

Thanks sooooo much everyone!!!!!

Rat

06-13-2004, 09:02 PM	#1
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	need help with wires i took apart my trucks wiring harness because it is all beat up. so i got an ez wire kits because i couldnt see paying what they want for a painless harness. so my problem is i took it apart around mon. and now it's sun and i cant figure were one connector goes.... i did the engine compartment first and now i am in the cab.... the connector has 4 wires coming out of it... a light green a dark green a yellow and a brown.... i cant figure out were it went.... i checked all the places i remember disconnecting wires but couldnt find anything that looked like it would fit this connector. if someone could help me that would be great!!!!! Any help would be great Thanks Rat __________________ Modify everything, leave nothing alone!~

06-13-2004, 09:24 PM	#2
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	can you post a pic of the connector? might reconize it ? __________________ [CGTW Member former 67-72 now with a 96 silverado

06-13-2004, 09:38 PM	#3
jef5150 Inline 69 Join Date: Apr 2003 Location: valleysprings,california Posts: 1,018	im pretty sure those go to the rear of the truck for tail lights/brake lights ((round connector))it should plug into the fire wall and run down the frame rail,,then there should be another shorter harness that plugs into the one on the frame rail and connects to the tail lights..... heres a link to all wiring diagrams http://www.geocities.com/chevroletc1070/wiringdias.html jeff Attached Images

06-13-2004, 09:39 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	that's normally the harness that goes to the back lights of the truck __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

06-13-2004, 09:43 PM	#5
71Rat ran out of money Join Date: Apr 2003 Location: northern, NJ Posts: 925	i think jef5150 hit it on the head... it's the firwall connector to those lights... wow i love this board!! Thanks sooooo much everyone!!!!! Rat __________________ Modify everything, leave nothing alone!~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.