Finally got something I needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Gary 70 Jimmy** · 01-27-2005, 10:06 AM

I got a Rear crome carpet hold down strip for my Jimmy from CA I have ben looking for one for 3 years I was waiting for it to come wednesday and it came right on time. The box was bent and had a lot of tape over a big hole I thought to my self I bet it is bent and it was. I hope I can straighten it.

**CPNE** · 01-27-2005, 11:15 AM

That really sucks. Too late now, but next time insist the shipper use PVC pipe as a shipping container. I did it many times with trim pieces. Cheap and indestructable (almost).

Hope you can salvage it

LUV2XCLR8 · 01-27-2005, 11:18 AM

Quote:

Originally Posted by CPNE

next time insist the shipper use PVC pipe as a shipping container. I did it many times with trim pieces. Cheap and indestructable (almost).

DAMN CPNE, THIS SHOULD BE ON THE "FAQ'S" SECTION

**CPNE** · 01-27-2005, 11:31 AM

Quote:

Originally Posted by LUV2XCLR8

DAMN CPNE, THIS SHOULD BE ON THE "FAQ'S" SECTION

There's so much I know, it's all in my book "Hints from Boz-All" AKA "What Not To Cut".
Also check out my web page www.FabbingFool.com

:rndll:

teeitup · 01-27-2005, 11:59 AM

That does suck, it happened to me on a tailgate band. I use a piece of 1x4 now when I ship them. I'm getting ready to ship some blazer rear panels, I have a piece of plywood I'm putting in between them to try to save them. Shipping Co don't care and they hard to get any $$$ out of too. Sorry for the bad luck, hope you can straighten it.

*dtlilly* · 01-27-2005, 05:28 PM

Dang that's some bad luck. Been looking for 3 years and finally get one... but it's bent. I hope you can get it fixed.

**Gary 70 Jimmy** · 01-27-2005, 07:27 PM

The lady at post office said that I could get my money back but they would have to keep it. I want to get my Jimmy back on the road in the spring I dont know how long it would take to find another one it cost me less than $50.00 to get this it mite cost over $100.00 to get another one. I will going back to the post office on friday to see what I can do. Maybe if I comeplain enough maybe I will get my money back and keep the part.

**Gary 70 Jimmy** · 01-27-2005, 07:34 PM

pcs

LUV2XCLR8 · 01-27-2005, 08:35 PM

NICE

thekidd · 01-28-2005, 12:05 AM

hey what color is that Jimmy exactly? I LIKE it.

krue · 01-28-2005, 12:54 AM

Maybe someone over at www.metalmeet.com can help you straighten that. It's worth a try.

**Gary 70 Jimmy** · 01-28-2005, 09:21 AM

I can email the pics to you it looks 10 times better if I dont have to down size them just give me your email address I dont no the color name but I do know the color # code. What state is that metal staightener place in.

01-27-2005, 10:06 AM	#1
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Finally got something I needed I got a Rear crome carpet hold down strip for my Jimmy from CA I have ben looking for one for 3 years I was waiting for it to come wednesday and it came right on time. The box was bent and had a lot of tape over a big hole I thought to my self I bet it is bent and it was. I hope I can straighten it. Attached Images

01-27-2005, 11:15 AM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	That really sucks. Too late now, but next time insist the shipper use PVC pipe as a shipping container. I did it many times with trim pieces. Cheap and indestructable (almost). Hope you can salvage it __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

01-27-2005, 11:59 AM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	That does suck, it happened to me on a tailgate band. I use a piece of 1x4 now when I ship them. I'm getting ready to ship some blazer rear panels, I have a piece of plywood I'm putting in between them to try to save them. Shipping Co don't care and they hard to get any $$$ out of too. Sorry for the bad luck, hope you can straighten it. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-27-2005, 07:34 PM	#8
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	pcs Last edited by Gary 70 Jimmy; 10-24-2008 at 08:52 AM.

01-27-2005, 08:35 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	NICE __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

01-27-2005, 05:28 PM	#6
dtlilly Account Suspended Join Date: Jan 2003 Location: Shadow of Lambeau Field Posts: 5,597	Dang that's some bad luck. Been looking for 3 years and finally get one... but it's bent. I hope you can get it fixed.

01-27-2005, 07:27 PM	#7
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	The lady at post office said that I could get my money back but they would have to keep it. I want to get my Jimmy back on the road in the spring I dont know how long it would take to find another one it cost me less than $50.00 to get this it mite cost over $100.00 to get another one. I will going back to the post office on friday to see what I can do. Maybe if I comeplain enough maybe I will get my money back and keep the part.

01-28-2005, 12:05 AM	#10
thekidd Registered User Join Date: Oct 2004 Location: Piedmont of North Carolina Posts: 196	hey what color is that Jimmy exactly? I LIKE it. __________________ thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer

01-28-2005, 12:54 AM	#11
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Maybe someone over at www.metalmeet.com can help you straighten that. It's worth a try. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

01-28-2005, 09:21 AM	#12
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	I can email the pics to you it looks 10 times better if I dont have to down size them just give me your email address I dont no the color name but I do know the color # code. What state is that metal staightener place in.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.