project almost done - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HavinSomeFun · 05-11-2011, 06:23 PM

Rob, now its possible he is a Pokes fan... He does have a nice truck, mad skills and I think Mcloud is 3 miles closer to Stillwater than Norman...

1low · 05-11-2011, 06:34 PM

how bout some specs (suspension,motor)

**Hart_Rod** · 05-11-2011, 06:57 PM

Quote:

Originally Posted by HavinSomeFun

Rob, now its possible he is a Pokes fan... He does have a nice truck, mad skills and I think Mcloud is 3 miles closer to Stillwater than Norman...

I was playin' the odds.....

Quote:

Originally Posted by screaminchevypickup

boomer sooner!!!!! the truck is lowered 5 1/2 front 8 back i first built a 383 for the truck but just a few weeks ago i changed it to a 427 SMALL BLOCK.... by the end of the week i hope to have all the white leather in... seats and wrapped door panels with stainless trim

VA72C10 · 05-11-2011, 07:35 PM

nice job!!!

**screaminchevypickup** · 05-11-2011, 07:45 PM

Quote:

Originally Posted by VA72C10

nice job!!!

thanks!!!!

**screaminchevypickup** · 05-11-2011, 11:36 PM

Posted via Mobile Device

**70cst** · 05-11-2011, 11:46 PM

Peeeeerrrrrrfection

**mac808** · 05-12-2011, 01:58 AM

Quote:

Originally Posted by screaminchevypickup

boomer sooner!!!!! the truck is lowered 5 1/2 front 8 back i first built a 383 for the truck but just a few weeks ago i changed it to a 427 SMALL BLOCK.... by the end of the week i hope to have all the white leather in... seats and wrapped door panels with stainless trim

Subscribed!! Can't wait to see this...especially with the Rushforths mounted up!

Which wheel you thinking of going with, if you don't mind me asking...? I love the simple yet sporty Rated X and Livewire/Trooper

jus2qwk · 05-12-2011, 09:47 AM

nice

**RenoKeene** · 05-12-2011, 12:30 PM

Very nice work and a great looking truck!
Like Mr Fun said...you got mad skills.

**screaminchevypickup** · 05-12-2011, 05:22 PM

Quote:

Originally Posted by RenoKeene

Very nice work and a great looking truck!
Like Mr Fun said...you got mad skills.

thanks guys!!

**screaminchevypickup** · 05-12-2011, 11:44 PM

I should have all the interior done tomorrow
Posted via Mobile Device

nuke1 · 05-13-2011, 10:37 AM

Great Job!!!!

DZL1 · 05-13-2011, 11:53 AM

Very nice work.

DZL1.

mcbassin · 05-13-2011, 04:14 PM

Wow! you weren't kidding about the sheetmetal. It was a solid foundation to build from for sure. You have kicked some serious butt on the build. Can't wait to see the interior in person. You should have taken a million pics and put it in the build section. 10 months is a crazy pace for a truck of this high quality. Great work Kyle!

mcbassin · 05-13-2011, 04:18 PM

Maybe some of THESE? or THESE?

Cole Trickle · 05-13-2011, 05:46 PM

Quote:

Originally Posted by screaminchevypickup

i will try to post more later tonight with all the pics in between. im still gonna change wheels and finish interior

cool truck....

I also own a brindle Boston

**screaminchevypickup** · 05-13-2011, 06:47 PM

Quote:

Originally Posted by Cole Trickle

cool truck....

I also own a brindle Boston

Posted via Mobile Device

**screaminchevypickup** · 05-18-2011, 09:39 PM

new pic

**GruntMoanCough** · 05-18-2011, 10:27 PM

That's not the same truck. JK. Very, very, very nice job!

mcbassin · 05-18-2011, 11:01 PM

Nice picture! That is a good looking hound you have there too. How you coming on the interior?

**screaminchevypickup** · 05-18-2011, 11:35 PM

Quote:

Originally Posted by mcbassin

Nice picture! That is a good looking hound you have there too. How you coming on the interior?

I got all the interior sitting waiting I have just been to busy with the camaro

Posted via Mobile Device

mcbassin · 05-18-2011, 11:44 PM

Quote:

Originally Posted by screaminchevypickup

I got all the interior sitting waiting I have just been to busy with the camaro

Posted via Mobile Device

Let me know if you need help. I'm down

**screaminchevypickup** · 05-21-2011, 05:19 AM

Will do!!!! Still trying to pick wheels to many choices
Posted via Mobile Device

**FRENCHBLUE72** · 05-21-2011, 11:19 AM

Truck turned out great..

05-11-2011, 06:23 PM	#26
HavinSomeFun Still Just Havin Some Fun! Join Date: Jun 2007 Location: Piedmont, Oklahoma Posts: 1,145	Re: project almost done Rob, now its possible he is a Pokes fan... He does have a nice truck, mad skills and I think Mcloud is 3 miles closer to Stillwater than Norman... __________________ a green one with some stuff done to it....

05-11-2011, 06:34 PM	#27
1low Registered User Join Date: Feb 2010 Location: Moyie Springs ID. Posts: 160	Re: project almost done how bout some specs (suspension,motor)

05-11-2011, 07:35 PM	#29
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: project almost done nice job!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-11-2011, 11:36 PM	#31
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: project almost done Posted via Mobile Device

05-11-2011, 11:46 PM	#32
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,339	Re: project almost done Peeeeerrrrrrfection __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-12-2011, 09:47 AM	#34
jus2qwk Registered User Join Date: Mar 2011 Location: Wytheville, Virginia Posts: 591	Re: project almost done nice __________________ Corey Jones Designs CoreyJonesDesigns on instagram Ole Silver- 1967 stepside http://www.hotrod.com/articles/1103c...chevrolet-c10/ http://67-72chevytrucks.com/vboard/s...d.php?t=598758

05-12-2011, 12:30 PM	#35
RenoKeene Florida Edition Join Date: Oct 2010 Location: Fruitland Park, FL Posts: 4,011	Re: project almost done Very nice work and a great looking truck! Like Mr Fun said...you got mad skills. __________________ 70 GMC Short Stepside "Rose"-An American Beauty: Factory 402/TH400, AM/FM, AC, Tilt, Tach, Buckets, Posi, PS, PB, 3-5 Drop, Complete Resto-Rod 67 C-20 Slant Back Wrecker "Mad Max" 67 C-10 Ratrod "Step-N-Wolf" 71 Serro Scotty Sportsman camper "Scotty" 97 LT1 Z28 "The Hornet" Link to more pics of "Rose" http://67-72chevytrucks.com/vboard/a...p?albumid=1684 Check out my "Cheap Tricks" thread and add to it if you can, lots of good info there. http://67-72chevytrucks.com/vboard/s...d.php?t=489394

05-12-2011, 11:44 PM	#37
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: project almost done I should have all the interior done tomorrow Posted via Mobile Device

05-13-2011, 10:37 AM	#38
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: project almost done Great Job!!!! __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

05-13-2011, 11:53 AM	#39
DZL1 One day..... Join Date: Aug 2008 Location: Ocala, FL. Posts: 702	Re: project almost done Very nice work. DZL1.

05-13-2011, 04:14 PM	#40
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project almost done Wow! you weren't kidding about the sheetmetal. It was a solid foundation to build from for sure. You have kicked some serious butt on the build. Can't wait to see the interior in person. You should have taken a million pics and put it in the build section. 10 months is a crazy pace for a truck of this high quality. Great work Kyle! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

05-13-2011, 04:18 PM	#41
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project almost done Maybe some of THESE? or THESE? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 05-13-2011 at 04:18 PM.

05-18-2011, 09:39 PM	#44
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: project almost done new pic Attached Images __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

05-18-2011, 10:27 PM	#45
GruntMoanCough Registered User Join Date: May 2009 Location: Pemberton, BC Posts: 1,075	Re: project almost done That's not the same truck. JK. Very, very, very nice job! __________________ My goal in life is to be as good a person as my dog already thinks I am - Unknown

05-18-2011, 11:01 PM	#46
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: project almost done Nice picture! That is a good looking hound you have there too. How you coming on the interior? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

05-21-2011, 05:19 AM	#49
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: project almost done Will do!!!! Still trying to pick wheels to many choices Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

05-21-2011, 11:19 AM	#50
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: project almost done Truck turned out great.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.