KS parting a 67 chevy pretty original with add on AC - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HOTFUN** · 07-16-2011, 11:04 PM

Randy I'll take the glovebox door and ignition switch bezel and spacer but I think we need a key to get it out of the dash. Also would like the T3 headlights from it if they are good. Let me know. Thanks, Mark

**Elliot949** · 07-17-2011, 09:35 AM

Hey Randy... when you [pull the front end apart would you look at the condition of the inner fenders... both L & R... If they are rust free shoot me a price on those also...

Walts_restoration · 07-17-2011, 09:43 AM

interested in the motor, whats the casting number and the front pad stamping? Dont really need the carb setup.

Vintage Windmills · 07-17-2011, 09:54 AM

Randy condition and price on rear bumper plz. Also if you have pics of your others please post as time permits. Hot here too, heat index of 115.

projectjimmie68 · 07-17-2011, 04:40 PM

I will take the horn guts. Send info for me to send money order. Thanks Projectjimmie

Fesser · 07-17-2011, 04:47 PM

Randy, I'll take the heater control. Don't know if I have your paypal.

m6z · 07-17-2011, 04:48 PM

Quote:

Originally Posted by m6z

condition and price of hubcaps? It's fkn hot out there.

Quote:

Originally Posted by teeitup

m6z, only have 2 factory, I'll have to check condition

Ok. No rush. Do you happen to have any other nice 67/68 core supports?

Fesser · 07-17-2011, 04:55 PM

and, if that pipe thing on the trans hump will fit a soda can, I have to have that too. Frank

**botmfedr1** · 07-17-2011, 05:41 PM

ok,

i will wait for you to check on how many ac brackets you have...and a quote to 79908. i do believe i am first in line for them...

thanks,
Mondo

**master 1969 c10** · 07-17-2011, 06:15 PM

Quote:

Originally Posted by 70-Shorty

PM sent i want the grill, headlight buckets front bumper and brackets to 91762 CA.
Tim

Randy,when u take the bed off or can get me some pictures of where the 3 rails bolt to the bed at. Just to make sure I got mine right. Thanks Doug

m6z · 07-17-2011, 06:46 PM

EDITED

wrong thread...

**rbagley** · 07-17-2011, 07:08 PM

I'll take the outer mirrors. Let me know how much it will be shipped to 83440 or 99362 (see PM for details). Thanks.

creepdogg · 07-17-2011, 08:31 PM

Randy will the bed being sold as a whole or do u plan to break it up ? I need some patch panel of the rear floor. Also is the ft grille still pending ? What shape are the fillers in ? Willing to split it up ? Finally how's the rear wire harness from frame to tail lamps on rear ? Tks
Posted via Mobile Device

teeitup · 07-17-2011, 09:24 PM

Sorry guys had to work all day getting ready for a big golf tourney tomorrow, wow is it hot!!!
Anyway
70-shorty, Tim, the grill and bumper is yours, I'll get it all off soon

Hotfun, Mark, glove box door, ign switch, headlights are yours

Elliott949. Dan, they both has some small rust in them

Walts, Ryan, I'll get some time this week

Vintage Windmills, Jud, I'll get pics soon

Projectjimmie, horn guys are yours

M6z, caps I still need to check, sorry no other 67-68 supports

Fesser, heater control is yours the deal on floor is not big enough for a can, not sure what it was for

Botmfedr1, only have 4 of the brackets $51 shipped for the 4

Master 1969 C10, Doug, sure will, but it may be a week or so

rbagley, Ryan, pm'd you

creepdogg, bed has wood floor. Grill is sold. I'll check rear harness

Thanks Randy

**Elliot949** · 07-17-2011, 09:27 PM

what do you want for them.. I can wait ubtil you get it apart to get some pics of them...

Thanks...

Dan

teeitup · 07-17-2011, 09:39 PM

$30 for the pair, Thanks Randy

**Elliot949** · 07-17-2011, 10:16 PM

add them to my list of parts please... thanks... Dan

**botmfedr1** · 07-17-2011, 10:59 PM

Sir,

i will take the 4 brackets....please PM your paypal information...
thank you,
Mondo

OLEBEATER · 07-18-2011, 07:34 AM

Did you get time to check the carb out?

Walts_restoration · 07-18-2011, 08:18 AM

no rush, just got me a pair of 4.10s to keep me occupied.

projectjimmie68 · 07-18-2011, 12:01 PM

Thanks mo will go out today. I still have your address

teeitup · 07-20-2011, 07:27 PM

Guys I'm trying to get some of this truck parted its 102 out there right now and I've been out there for 3 hours, not moving very fast, sorry.
Olebeater, Air cleaner is a 4 barrel
Thanks Randy

**Elliot949** · 07-20-2011, 08:35 PM

Randy... No rush on my part...

Leroy-B1 · 07-20-2011, 09:45 PM

Randy on vacation so whenever you get to the a/c stuff pm me if you don't mind...hard to go through thread on cell phone
Posted via Mobile Device

**oldgold70c10** · 07-20-2011, 10:04 PM

Randy,
how bad is the cab rust?

07-16-2011, 11:04 PM	#26
HOTFUN Senior Member Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,136	Re: parting a 67 chevy pretty original with add on AC Randy I'll take the glovebox door and ignition switch bezel and spacer but I think we need a key to get it out of the dash. Also would like the T3 headlights from it if they are good. Let me know. Thanks, Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

07-17-2011, 09:35 AM	#27
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy pretty original with add on AC Hey Randy... when you [pull the front end apart would you look at the condition of the inner fenders... both L & R... If they are rust free shoot me a price on those also...

07-17-2011, 09:43 AM	#28
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: parting a 67 chevy pretty original with add on AC interested in the motor, whats the casting number and the front pad stamping? Dont really need the carb setup. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-17-2011, 09:54 AM	#29
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: parting a 67 chevy pretty original with add on AC Randy condition and price on rear bumper plz. Also if you have pics of your others please post as time permits. Hot here too, heat index of 115. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

07-17-2011, 04:40 PM	#30
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: parting a 67 chevy pretty original with add on AC I will take the horn guts. Send info for me to send money order. Thanks Projectjimmie

07-17-2011, 04:47 PM	#31
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: parting a 67 chevy pretty original with add on AC Randy, I'll take the heater control. Don't know if I have your paypal.

07-17-2011, 04:55 PM	#33
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: parting a 67 chevy pretty original with add on AC and, if that pipe thing on the trans hump will fit a soda can, I have to have that too. Frank

07-17-2011, 05:41 PM	#34
botmfedr1 Senior Member Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,098	Re: parting a 67 chevy pretty original with add on AC ok, i will wait for you to check on how many ac brackets you have...and a quote to 79908. i do believe i am first in line for them... thanks, Mondo Last edited by botmfedr1; 07-17-2011 at 05:44 PM. Reason: ...

07-17-2011, 06:46 PM	#36
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: parting a 67 chevy pretty original with add on AC EDITED wrong thread... __________________ Doug Looking for a 67-72 short bed driver.....

07-17-2011, 07:08 PM	#37
rbagley Senior Member Join Date: May 2009 Location: Walla Walla, WA Posts: 319	Re: parting a 67 chevy pretty original with add on AC I'll take the outer mirrors. Let me know how much it will be shipped to 83440 or 99362 (see PM for details). Thanks. Last edited by rbagley; 07-17-2011 at 07:33 PM.

07-17-2011, 08:31 PM	#38
creepdogg Registered User Join Date: Jul 2011 Location: Ann Arbor Posts: 453	Re: parting a 67 chevy pretty original with add on AC Randy will the bed being sold as a whole or do u plan to break it up ? I need some patch panel of the rear floor. Also is the ft grille still pending ? What shape are the fillers in ? Willing to split it up ? Finally how's the rear wire harness from frame to tail lamps on rear ? Tks Posted via Mobile Device

07-17-2011, 09:24 PM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC Sorry guys had to work all day getting ready for a big golf tourney tomorrow, wow is it hot!!! Anyway 70-shorty, Tim, the grill and bumper is yours, I'll get it all off soon Hotfun, Mark, glove box door, ign switch, headlights are yours Elliott949. Dan, they both has some small rust in them Walts, Ryan, I'll get some time this week Vintage Windmills, Jud, I'll get pics soon Projectjimmie, horn guys are yours M6z, caps I still need to check, sorry no other 67-68 supports Fesser, heater control is yours the deal on floor is not big enough for a can, not sure what it was for Botmfedr1, only have 4 of the brackets $51 shipped for the 4 Master 1969 C10, Doug, sure will, but it may be a week or so rbagley, Ryan, pm'd you creepdogg, bed has wood floor. Grill is sold. I'll check rear harness Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-17-2011, 09:27 PM	#40
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy pretty original with add on AC what do you want for them.. I can wait ubtil you get it apart to get some pics of them... Thanks... Dan

07-17-2011, 09:39 PM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC $30 for the pair, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-17-2011, 10:16 PM	#42
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy pretty original with add on AC add them to my list of parts please... thanks... Dan



Register or Log In To remove these advertisements.

07-17-2011, 10:59 PM	#43
botmfedr1 Senior Member Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,098	Re: parting a 67 chevy pretty original with add on AC Sir, i will take the 4 brackets....please PM your paypal information... thank you, Mondo

07-18-2011, 07:34 AM	#44
OLEBEATER Registered User Join Date: Mar 2009 Location: Virginia Posts: 295	Re: parting a 67 chevy pretty original with add on AC Did you get time to check the carb out?

07-18-2011, 08:18 AM	#45
Walts_restoration Real Projects never die Join Date: Jan 2007 Location: Lawrence, kansas Posts: 1,508	Re: parting a 67 chevy pretty original with add on AC no rush, just got me a pair of 4.10s to keep me occupied. __________________ Ill put it this way, ive got a few lawn ornaments My name tag says Ryan KansasTwister On other forums

07-18-2011, 12:01 PM	#46
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: parting a 67 chevy pretty original with add on AC Thanks mo will go out today. I still have your address

07-20-2011, 07:27 PM	#47
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: parting a 67 chevy pretty original with add on AC Guys I'm trying to get some of this truck parted its 102 out there right now and I've been out there for 3 hours, not moving very fast, sorry. Olebeater, Air cleaner is a 4 barrel Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-20-2011, 08:35 PM	#48
Elliot949 Dan Johnston Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: parting a 67 chevy pretty original with add on AC Randy... No rush on my part...

07-20-2011, 09:45 PM	#49
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: parting a 67 chevy pretty original with add on AC Randy on vacation so whenever you get to the a/c stuff pm me if you don't mind...hard to go through thread on cell phone Posted via Mobile Device

07-20-2011, 10:04 PM	#50
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,023	Re: parting a 67 chevy pretty original with add on AC Randy, how bad is the cab rust? __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

Register or Log In To remove these advertisements.