AZ Parting out 78 GMC K20 High Sierra - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 11-24-2015, 10:55 AM

I picked up this truck for some of the interior, motor and some of the hardware as my 77 shortbed 4x4 doesn't have a motor and some of the basic hardware was missing. This truck has been wrecked for a long time. There isn't much for good body parts but the truck is solid with no rust issues. I will consider cutting out patch panels out of the cab. I will be posting parts with prices once I get a good chance to check out the condition and see what all that I will be using. Truck has a turbo 400 and limited slip rear end. I won't ship large, heavy items but local pick up is welcome. Not sure why the picture is so small on the tailgate band. I will take new ones when I get over there.
$170 for the narrow GMC tailgate band. it is nice but has one small ding on the left side.
$125 for the tilt column
$400 for both axles(local pick up only)

77K10Silverado · 11-24-2015, 02:37 PM

How does the tach look if it has one.. Price for it with wiring?

goldenwestmodels · 11-24-2015, 03:29 PM

I am in line for the red interior parts and dash bezel,trim over glove box pending condition and price.These parts would be for my 78 blazer.
Vern

**1774btcrew** · 11-24-2015, 04:46 PM

Quote:

Originally Posted by 77K10Silverado

How does the tach look if it has one.. Price for it with wiring?

It doesn't actually have a tachometer

**1774btcrew** · 11-24-2015, 04:47 PM

Quote:

Originally Posted by goldenwestmodels

I am in line for the red interior parts and dash bezel,trim over glove box pending condition and price.These parts would be for my 78 blazer.
Vern

Vern, I will look at the truck tomorrow and check out the condition. I am keeping most of the red stuff as I have a 79 with no interior

**bhc41051** · 11-25-2015, 02:33 AM

I'd be interested in the wiper blades if they're 16" and have the "Trico" stamp

**special-K** · 11-25-2015, 07:43 AM

Is that left rear wheel an 16.5 x 8.25? Kinda hard to tell in picture. I don't need it but someone might.

xbanone · 11-25-2015, 10:05 AM

I am interested in the cab trim and corner trim and the rain gutter assemblies.

**1774btcrew** · 11-26-2015, 01:49 AM

Quote:

Originally Posted by special-K

Is that left rear wheel an 16.5 x 8.25? Kinda hard to tell in picture. I don't need it but someone might.

I think both that are currently on the left side are 16" but I will check.

**1774btcrew** · 11-30-2015, 11:28 AM

I will be pulling this apart this week. Want to get it scrapped out pretty quickly.

**1774btcrew** · 11-30-2015, 11:30 AM

Quote:

Originally Posted by bhc41051

I'd be interested in the wiper blades if they're 16" and have the "Trico" stamp

I have some listed in my for sale posts. They are $35 a pair without new refills and $50 with

**bhc41051** · 11-30-2015, 07:31 PM

Quote:

Originally Posted by 1774btcrew

I have some listed in my for sale posts. They are $35 a pair without new refills and $50 with

I'll pass on the blades, I found a NOS set that I couldn't pass up. I am looking for an OEM Delco blower motor though.

favor · 12-06-2015, 10:17 PM

I need grille emblem -any strait grille trim?

**1774btcrew** · 12-06-2015, 10:22 PM

This just had a cheaply grille so no time or emblems

1985-GMC · 12-07-2015, 12:35 AM

How much shipped to 78133 for the chrome trim pieces on the door panels that go around the aluminum inserts?

**bhc41051** · 12-07-2015, 08:56 PM

Quote:

Originally Posted by bhc41051

I'll pass on the blades, I found a NOS set that I couldn't pass up. I am looking for an OEM Delco blower motor though.

So I guess you don't have a Delco blower motor?

**1774btcrew** · 12-07-2015, 09:37 PM

It has been dark both times I have been over there so I haven't been able to check

Littletony · 12-17-2015, 05:02 PM

How much would you want for the high hump and about 4" of metal where it mounts?

**1774btcrew** · 12-17-2015, 08:18 PM

Quote:

Originally Posted by bhc41051

So I guess you don't have a Delco blower motor?

I looked again last time I was over there. It was dark again. Where are these marked? Are the just stamped Delco?

**1774btcrew** · 12-17-2015, 08:24 PM

Quote:

Originally Posted by Littletony

How much would you want for the high hump and about 4" of metal where it mounts?

I would want $100 for it not including shipping just for the time cutting it out

**1774btcrew** · 12-17-2015, 08:27 PM

Quote:

Originally Posted by 1985-GMC

How much shipped to 78133 for the chrome trim pieces on the door panels that go around the aluminum inserts?

Sorry for the delay in getting back to you. I was out of town and only had my phone to work from. The problem with the pieces around the aluminum is that they are nearly impossible to remove without breaking the pins off

Littletony · 12-17-2015, 08:55 PM

Let me see if I can locate one local

**1774btcrew** · 12-17-2015, 10:33 PM

Quote:

Originally Posted by Littletony

Let me see if I can locate one local

Ya, local would save you some cash. The actual cover would be pretty cheap but cutting it out just takes some time

**1774btcrew** · 12-23-2015, 12:35 PM

Ttt

79 Silverado/454 · 12-23-2015, 07:03 PM

Quote:

Originally Posted by goldenwestmodels

I am in line for the red interior parts and dash bezel,trim over glove box pending condition and price.These parts would be for my 78 blazer.
Vern

So is the dash bezel & dash strip still available ? If so is it the brushed aluminum or ? Also I would like to know the condition and price.

11-24-2015, 10:55 AM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Parting out 78 GMC K20 High Sierra I picked up this truck for some of the interior, motor and some of the hardware as my 77 shortbed 4x4 doesn't have a motor and some of the basic hardware was missing. This truck has been wrecked for a long time. There isn't much for good body parts but the truck is solid with no rust issues. I will consider cutting out patch panels out of the cab. I will be posting parts with prices once I get a good chance to check out the condition and see what all that I will be using. Truck has a turbo 400 and limited slip rear end. I won't ship large, heavy items but local pick up is welcome. Not sure why the picture is so small on the tailgate band. I will take new ones when I get over there. $170 for the narrow GMC tailgate band. it is nice but has one small ding on the left side. $125 for the tilt column $400 for both axles(local pick up only) __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck. Last edited by 1774btcrew; 02-19-2018 at 08:40 PM.

11-24-2015, 02:37 PM	#2
77K10Silverado Registered User Join Date: Jul 2014 Location: Winston-Salem, NC Posts: 561	Re: Parting out 78 GMC K20 High Sierra How does the tach look if it has one.. Price for it with wiring? __________________ *Mike B.* 77 K10 - http://67-72chevytrucks.com/vboard/s...=1#post6752641

11-24-2015, 03:29 PM	#3
goldenwestmodels Registered User Join Date: Feb 2007 Location: shaws flat Posts: 89	Re: Parting out 78 GMC K20 High Sierra I am in line for the red interior parts and dash bezel,trim over glove box pending condition and price.These parts would be for my 78 blazer. Vern

11-25-2015, 02:33 AM	#6
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 787	Re: Parting out 78 GMC K20 High Sierra I'd be interested in the wiper blades if they're 16" and have the "Trico" stamp Attached Images

11-25-2015, 07:43 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Parting out 78 GMC K20 High Sierra Is that left rear wheel an 16.5 x 8.25? Kinda hard to tell in picture. I don't need it but someone might. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-25-2015, 10:05 AM	#8
xbanone Registered User Join Date: Oct 2008 Location: WV Posts: 209	Re: Parting out 78 GMC K20 High Sierra I am interested in the cab trim and corner trim and the rain gutter assemblies. __________________ 1976 K15 Short/Step 1981 C10 short/wide 1994 K1500 ECSB

11-30-2015, 11:28 AM	#10
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 78 GMC K20 High Sierra I will be pulling this apart this week. Want to get it scrapped out pretty quickly. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-06-2015, 10:17 PM	#13
favor Registered User Join Date: Sep 2015 Location: cape coral,FL Posts: 80	Re: Parting out 78 GMC K20 High Sierra I need grille emblem -any strait grille trim?

12-06-2015, 10:22 PM	#14
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 78 GMC K20 High Sierra This just had a cheaply grille so no time or emblems __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-07-2015, 12:35 AM	#15
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Parting out 78 GMC K20 High Sierra How much shipped to 78133 for the chrome trim pieces on the door panels that go around the aluminum inserts? __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

12-07-2015, 09:37 PM	#17
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 78 GMC K20 High Sierra It has been dark both times I have been over there so I haven't been able to check __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-17-2015, 05:02 PM	#18
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting out 78 GMC K20 High Sierra How much would you want for the high hump and about 4" of metal where it mounts? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

12-17-2015, 08:55 PM	#22
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting out 78 GMC K20 High Sierra Let me see if I can locate one local __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

12-23-2015, 12:35 PM	#24
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,543	Re: Parting out 78 GMC K20 High Sierra Ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.