project i can't afford it has begun - The 1947 - Present Chevrolet & GMC Truck Message Board Network

revn67 · 09-08-2007, 05:22 PM

so here is the start of the teardown and then i got it towed to my buddies house so i could remove the bed and cab from the frame and then get the frame in the garage so i could start cutting and welding......

Omnivec · 09-08-2007, 05:28 PM

Looking good. Love the slider

Spray-Bomb · 09-09-2007, 03:58 PM

Looks like it was sweet, are you just gonna slam it ???

revn67 · 09-10-2007, 01:06 PM

my plans are to backhalf it and get it layed on the pinchweld on 22's........i'll bodydrop it an inch and i am z-ing the front 4in, it will all be shaved smooth and i'm gonna be fabbing up a custom dash and center console with either vette or gto seats for the interior, all disc brakes around and i'll be using an impala rearend which will allow me to use deeper dished wheels in the rear.....it'll be a pretty long build thread (most likely 3yrs till its finished) but it'll look the way i want and certainly it will go fast!!

72BlckButy · 09-10-2007, 01:23 PM

Looks good so far... good luck on the build!

revn67 · 09-30-2007, 05:33 PM

well here is an update on my build...i'm working on the 4in z infront and will get it all finshed up by next weekend, i also ordered my strong-arm control arms and 2 1/2" drop spindles that should come in within the next two weeks or so, i have a pair of zo6 calipers that will be used for the front brake system......and thats it for now

GREASEMONKEY72 · 10-02-2007, 10:31 PM

looks good so far

Joe67 · 10-03-2007, 08:26 AM

Looks like a nice project - keep us posted

09-08-2007, 05:22 PM	#1
revn67 Registered User Join Date: Jul 2005 Location: east longmeadow, MA Posts: 540	project i can't afford it has begun so here is the start of the teardown and then i got it towed to my buddies house so i could remove the bed and cab from the frame and then get the frame in the garage so i could start cutting and welding...... Attached Images __________________ 67 small windowed,shortbed,fleetside, sbc 327, th350,12 bolt :under the knife: 71 cab for sale in parts classifieds! 2004 black chevy 1500 "finish your beer, theres sober kids in india!"

09-08-2007, 05:28 PM	#2
Omnivec Registered User Join Date: May 2007 Location: CA Posts: 39	Re: project i can't afford it has begun Looking good. Love the slider __________________ 67 3/4 Lwb Step side X San Diego County truck 70 3/4 berb was 402 Th400 Dana 60 now just the dana 70 3/4 lwb Fleet Choptop bagged th350 no eng yet 79 rx7 Wide body 350 TPI t5 flat black(The interceptor) 64 comet mounted on a 93 Thunderbird chassis.

09-09-2007, 03:58 PM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: project i can't afford it has begun Looks like it was sweet, are you just gonna slam it ??? __________________ Just not low enough... ----------------------------- Sinister Killer

09-10-2007, 01:06 PM	#4
revn67 Registered User Join Date: Jul 2005 Location: east longmeadow, MA Posts: 540	Re: project i can't afford it has begun my plans are to backhalf it and get it layed on the pinchweld on 22's........i'll bodydrop it an inch and i am z-ing the front 4in, it will all be shaved smooth and i'm gonna be fabbing up a custom dash and center console with either vette or gto seats for the interior, all disc brakes around and i'll be using an impala rearend which will allow me to use deeper dished wheels in the rear.....it'll be a pretty long build thread (most likely 3yrs till its finished) but it'll look the way i want and certainly it will go fast!! __________________ 67 small windowed,shortbed,fleetside, sbc 327, th350,12 bolt :under the knife: 71 cab for sale in parts classifieds! 2004 black chevy 1500 "finish your beer, theres sober kids in india!" Last edited by revn67; 09-10-2007 at 05:16 PM.

09-10-2007, 01:23 PM	#5
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: project i can't afford it has begun Looks good so far... good luck on the build! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-30-2007, 05:33 PM	#6
revn67 Registered User Join Date: Jul 2005 Location: east longmeadow, MA Posts: 540	Re: project i can't afford it has begun well here is an update on my build...i'm working on the 4in z infront and will get it all finshed up by next weekend, i also ordered my strong-arm control arms and 2 1/2" drop spindles that should come in within the next two weeks or so, i have a pair of zo6 calipers that will be used for the front brake system......and thats it for now Attached Images __________________ 67 small windowed,shortbed,fleetside, sbc 327, th350,12 bolt :under the knife: 71 cab for sale in parts classifieds! 2004 black chevy 1500 "finish your beer, theres sober kids in india!"

10-02-2007, 10:31 PM	#7
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: project i can't afford it has begun looks good so far __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

10-03-2007, 08:26 AM	#8
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: project i can't afford it has begun Looks like a nice project - keep us posted __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.