The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-28-2019, 10:29 PM   #1
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
Talking More than I thought!

Trying to get things ready for the 2019 Hot Rod Power tour next week. Last minute stuff. I blew one of my rear helper bags today. So I ordered 2 new ones. Figured if one blew the other one may not be far behind it. New ones should be here Friday.
I worked on my cruise control and got it back working, Don't know what fixed it because I took everything a part and put it back together and only did a minor wire fix to the one brake wire. I put new spade connector's on my AC compressor switch behind the duct work in the cab. It was 93* out side today but the truck AC was running good at 40*

Coming back from Mississippi 2 weeks ago I figured out why the AC kept cutting off. I first thought it was freezing up but it was one of the connectors on the ac switch.
Changed the oil & filter also today.
Tomorrow I get the hanger fixed on the exhaust that's broke don't know when that happened. Then tomorrow afternoon I'm going to work on the rear disc brakes again and see if I can get them better. CPP rear brakes are a ***** to adjust.
That should be everything I hope!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com