Project Screamer - '72 GMC K2500 + DD 4-53T

[ryanroo]

engine accessory bracketry is always fun stuff!

the joint in denver is Interstate Turbo and supply, i seem to have left the invoice somewhere farther away from my computer than is reasonable to walk while my coffee is still warm.

https://www.google.com/search?safe=o....0.fhX8nZTNM5w

the invoices come from fleetpride, so i assume they are a division of, or somehow interconnected.

[burnitg]

Power Steering Pump Bracket - done! Another item to cross of the list, only 999 to go...

Here's the view from the front. The pulley just clears the belt for the A/C compressor. I may have to move the fan up eventually when I mount the radiator and make a shroud. If I do move the fan, I will just need to buy a couple of new V belts.



Here's the view from the rear. Most of the rear bracket is the original bracket from the 350.



Here's the top view. I will trim the frame a little near the pump to make sure that there is enough clearance when the engine rocks. I have boxed the frame around the power steering box connection, so I won't be giving up any strength.

[burnitg]

Originally Posted by ryanroo

engine accessory bracketry is always fun stuff!

the joint in denver is Interstate Turbo and supply, i seem to have left the invoice somewhere farther away from my computer than is reasonable to walk while my coffee is still warm.

https://www.google.com/search?safe=o....0.fhX8nZTNM5w

the invoices come from fleetpride, so i assume they are a division of, or somehow interconnected.

Thanks, Ryan. I will check them out.