The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-21-2006, 09:25 AM   #1
jamon8
Registered User
 
jamon8's Avatar
 
Join Date: Apr 2006
Location: southern Il
Posts: 335
74 crossmember in a 69 c-10

I am about to pull a disc brake crossmember out of a 74 c-10 that had hydroboost, but I dont think that will matter

what kind of problems will i run into swapping that crossmember, control arms and brakes into my 69 c-10

I am not so concerned with the brake set-up because I have a booster and master cylinder to match.

what I am really concerned with is the bolt up of the crossmember such as-

1. what am I to do with the motor mounts- I have brand new set on the old set-up

2. will all the nessesary bolt holes line up or will I have to do some drillin

3.will the new tie rod ends work in the 74 spindals.

thanks in advance for the info. I try to anticipate and solve oncomming problems before I start pulling my baby apart more than she already is.
jamon8 is offline   Reply With Quote
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:19 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com