CA 1972 sub part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ddman6 · 11-02-2013, 10:22 AM

Do you have the spare tire well? What condition is it in?

Vova · 11-02-2013, 10:51 AM

Quote:

Originally Posted by ddman6

Do you have the spare tire well? What condition is it in?

I do. It looks to be in good condition.

ddman6 · 11-02-2013, 11:39 AM

Sweet. How much? And pic?

Thanks

killerpanel · 11-02-2013, 04:43 PM

Man, I know you said you wouldn't ship anything...BUT I sure could use those back doors! I could arrange freight, if you could get them on a pallet!

Vova · 11-02-2013, 05:32 PM

Quote:

Originally Posted by killerpanel

Man, I know you said you wouldn't ship anything...BUT I sure could use those back doors! I could arrange freight, if you could get them on a pallet!

Sure if you arrant shipping. I think greyhound would be cheapest.

Vova · 11-10-2013, 11:02 PM

Cutting up the sub.
http://67-72chevytrucks.com/vboard/s...d.php?t=603846

clamcake · 11-17-2013, 08:01 PM

pm sent for center section of the floors

**Jurassic-1** · 12-04-2013, 07:41 PM

How much for the left quarter and l taillamp?

Vova · 12-04-2013, 09:38 PM

Quote:

Originally Posted by Jurassic-1

How much for the left quarter and l taillamp?

Can you draw a picture around the area you need?

**Jurassic-1** · 12-05-2013, 08:58 AM

How much for the left rear side? Need the clip below the glass but need it including the whole side up to the front drivers door. It could be cut through the window posts and across the inside floor area then inside the rear door area so I can change the entire side. If you want PM youre # or I can send you my # and get a better Idea of what is needed. Thanks

Vova · 12-05-2013, 12:21 PM

Can you circle the area you need on one of the pics in the beginning of the thread?

**Jurassic-1** · 12-05-2013, 01:43 PM

Quote:

Originally Posted by Vova

Can you circle the area you need on one of the pics in the beginning of the thread?

I am not sure how to do it. I have a post from another board member that is circled I can E-mail you a copy. if you send your e-mail address,

Vova · 12-05-2013, 07:22 PM

Quote:

Originally Posted by Jurassic-1

I am not sure how to do it. I have a post from another board member that is circled I can E-mail you a copy. if you send your e-mail address,

I sent you my email.

**Jurassic-1** · 12-05-2013, 09:05 PM

I did not receive the email but this is what I need. Just the left quarter. I borrowed this post from the forum. Thanks

Vova · 12-05-2013, 09:13 PM

Quote:

Originally Posted by Jurassic-1

I did not receive the email but this is what I need. Just the left quarter. I borrowed this post from the forum. Thanks

Mine has some rust on the bottom section. I posted some pics in this thread
http://67-72chevytrucks.com/vboard/s...d.php?t=603846
I do have two good wheel wells if you need those to.

**Jurassic-1** · 12-05-2013, 09:35 PM

The rust is not too large is it? How much for the side?

Vova · 12-05-2013, 09:37 PM

Quote:

Originally Posted by Jurassic-1

The rust is not too large is it? How much for the side?

It's at the bottom. I think the shipping out be the expensive part. I shipped a radiator support to NY via Gray Hound and it was $98. This pieces would probably be $125-$140 just for the shipping.

**Jurassic-1** · 12-05-2013, 09:56 PM

Quote:

Originally Posted by Vova

It's at the bottom. I think the shipping out be the expensive part. I shipped a radiator support to NY via Gray Hound and it was $98. This pieces would probably be $125-$140 just for the shipping.

What would you need if I could get someone to pick it up. I do need the whole side.

Vova · 12-05-2013, 10:03 PM

Quote:

Originally Posted by Jurassic-1

What would you need if I could get someone to pick it up. I do need the whole side.

PM'ed you

**Razorbacker** · 12-08-2013, 12:14 PM

Are you planning on using the crank pulleys? I would be interested if they are correct for 72.

Thanks,
Tony

Vova · 12-08-2013, 12:29 PM

Quote:

Originally Posted by Razorbacker

Are you planning on using the crank pulleys? I would be interested if they are correct for 72.

Thanks,
Tony

They are gone.

**Razorbacker** · 12-08-2013, 12:54 PM

Ok thanks,

Tony

**Jurassic-1** · 12-09-2013, 08:03 PM

I was interested in the Left bedside panel I inquired about earlier. Can you give me a call on what cut I would need? Phone # was PMed to you. Thanks

Vova · 12-09-2013, 09:10 PM

Left bedside panel sold.

1970greenburb · 12-20-2013, 12:33 AM

How much for the rear tail. That part unbolts . Zip is 98247
Thanks

11-02-2013, 10:22 AM	#51
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 57	Re: 1972 sub part out Do you have the spare tire well? What condition is it in?

11-02-2013, 11:39 AM	#53
ddman6 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 57	Re: 1972 sub part out Sweet. How much? And pic? Thanks

11-02-2013, 04:43 PM	#54
killerpanel Registered User Join Date: Oct 2013 Location: Schenectady NY Posts: 79	Re: 1972 sub part out Man, I know you said you wouldn't ship anything...BUT I sure could use those back doors! I could arrange freight, if you could get them on a pallet!

11-10-2013, 11:02 PM	#56
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: 1972 sub part out Cutting up the sub. http://67-72chevytrucks.com/vboard/s...d.php?t=603846

11-17-2013, 08:01 PM	#57
clamcake Registered User Join Date: Jul 2013 Location: Easton, Ma Posts: 39	Re: 1972 sub part out pm sent for center section of the floors

12-04-2013, 07:41 PM	#58
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: 1972 sub part out How much for the left quarter and l taillamp?

12-05-2013, 08:58 AM	#60
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: 1972 sub part out How much for the left rear side? Need the clip below the glass but need it including the whole side up to the front drivers door. It could be cut through the window posts and across the inside floor area then inside the rear door area so I can change the entire side. If you want PM youre # or I can send you my # and get a better Idea of what is needed. Thanks Last edited by Jurassic-1; 12-05-2013 at 09:01 AM. Reason: More info

12-05-2013, 12:21 PM	#61
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: 1972 sub part out Can you circle the area you need on one of the pics in the beginning of the thread?

12-05-2013, 09:05 PM	#64
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: 1972 sub part out I did not receive the email but this is what I need. Just the left quarter. I borrowed this post from the forum. Thanks Attached Images

12-05-2013, 09:35 PM	#66
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: 1972 sub part out The rust is not too large is it? How much for the side?

12-08-2013, 12:14 PM	#70
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: 1972 sub part out Are you planning on using the crank pulleys? I would be interested if they are correct for 72. Thanks, Tony

12-08-2013, 12:54 PM	#72
Razorbacker Senior Member Join Date: Aug 2011 Location: Benton, AR. Posts: 239	Re: 1972 sub part out Ok thanks, Tony

12-09-2013, 08:03 PM	#73
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: 1972 sub part out I was interested in the Left bedside panel I inquired about earlier. Can you give me a call on what cut I would need? Phone # was PMed to you. Thanks

12-09-2013, 09:10 PM	#74
Vova Registered User Join Date: Aug 2012 Location: Los gatos ca Posts: 1,299	Re: 1972 sub part out Left bedside panel sold.

12-20-2013, 12:33 AM	#75
1970greenburb Registered User Join Date: Oct 2012 Location: Everson, wa Posts: 96	Re: 1972 sub part out How much for the rear tail. That part unbolts . Zip is 98247 Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.